Include Hardware Installation Guide HDD Formatting

Shark
 Include
Hardware Installation Guide
HDD Formatting Guide (Win)
USB
3.0
External
Enclosure
Installation
Manual
Hardware Installation Guide
☆ Please follow the instructions and make sure your hard drive is successfully
installed to the external enclosure.
STEP1: Pull out the HDD tray from the case.
STEP2: Connect the HDD to the SATA connector and screw the HDD to the tray.
Note: Make sure the connector is well connected.
1
USB 3.0 External Enclosure Installation
STEP3: Insert the HDD tray to the enclosure and screw the enclosure.
STEP4: Connect the enclosure to the PC or notebook via USB 3.0 cable.
2
Manual
USB
3.0
External
Enclosure
Installation
Manual
HDD Formatting Guide
☆ You may format your external HDD through USB connection.
☆ Please make sure your external HDD is turned on and well connected to the PC before formatting
the HDD.
STEP1: Right -click “My Computer” icon and select the” Manage” column.
STEP2: Select “Disk Management” and you will see your External HDD showed
“Unallocated”.
STEP3: Right-click on the “Unallocated” block and select “New Partition”.
3
USB 3.0 External Enclosure Installation Manual
STEP4: The “New Partition Wizard” will appear. Please follow the wizard and
complete the partition.
STEP5: When new partition is completed, the external HDD will be recognized as a
“New Volume”.
STEP6: Double-click “My Computer”. You will see the new volume appears on your
PC.
4