IPES-3416DSFP - Optronics Technologies SA

1
Industrial PoE Managed Switches
IPES-3416DSFP
16 10/100TX + 4 100/1000 SFP L2+ PoE at/af Industrial Managed Switch
w/ ITU G.8032 Ring

Support IEEE802.3at/af up to 30W per port

PoE management incl. Detection and Scheduling

12V input booster design to feed 48V output(12V model)

ITU G.8032 standard ring protection < 20ms incl. data &
multicast* packets; co-exist with RSTP

Miss-wiring avoidance & Repowered auto ring restore
(node failure protection)

User friendly UI, including auto topology drawing and DDM
threshold monitoring with dB values***; Complete CLI

Support LACP link aggregation, IGMP v3/router port,
DHCP server, Port&VLAN based DHCP distribution,
DHCP Option 82, SSH/SSL, TACAS+*, ACL, IPv6, SMS

Environmental Monitoring for temp., voltage & current**
OVERVIEW
Lantech IPES-3416DSFP is a high performance L2+ (Gigabit
technology that can accept input voltage from 12V ~ 48V and
uplink) switch with 16 10/100TX + 4 100/1000M SFP w/16 PoE
deliver PoE power at 48V to feed the PD with PoE budget 80W
802.3af/at Injectors which provides L2 wire speed and
(12V input) or 120W (24V input).
advanced security function for network aggregation deployment.
It delivers ITU G.8032 ring recovery less than 20ms,
The IPES-3416DSFP also embedded several features for
comprehensive QoS, advanced security including ACL L2/L3,
stronger and reliable network protection in an easy and intuitive
SSH/SSL, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router
way. When the pre-set ring configuration failed or looped by
port, QinQ* (double tag VLAN) , and MVR (multicast VLAN
miss-wiring, Lantech IPES-3416DSFP is able to alert with the
registration), which are important features required in large
LED indicator and send out an email, traps or a SMS text.
network. It also supports Cisco Discovery Protocol (CDP) and
Repowered auto ring restore function (node failure protection)
LLDP for Ciscoworks to detect the switch info and show on L2
ensures the switches in a ring to survive after power breakout is
map topology.
back. The status can be shown in NMS when each switch is
back. This feature prevents the broken ring and keep ring alive
Compliant with 802.3af/at standard, the Lantech
without any re-configuration needed. Loop protection is also
IPES-3416DSFP is able to feed each PoE port up to 30
available to prevent the generation of broadcast storm when a
Watts@54 VDC providing the connected PD devices. Lantech
dumb switch is inserted in a closed loop connection.
IPES-3416DSFP supports advanced PoE management
including PoE detection and scheduling. PoE detection can
DHCP option 82 and relay agent function (port&vlan based
detect if the connected PD is hang up then restart the PD; PoE
DHCP distribution) can offer the same IP address on port base
scheduling is to allow pre-set power feeding schedule upon
or vlan base where there is need to replace the new device
routine time table. Each PoE ports can be Enabled/disabled, get
connecting to Lantech switches to avoid any network disruption.
the voltage, current, Watt, and temperature info displayed on
WebUI.
IPES-3416DSFP-12V is built with Booster
The user friendly UI, innovative auto topology drawing and
Datasheet Version 1.0
www.lantechcom.tw | info@lantechcom.tw
2
Industrial PoE Managed Switches
topology demo makes IPES-3416DSFP much easier to get
Port / Power events, for example, DIDO function can trigger
hands-on. The switch also equips the RTC (real time clock)
alarm if the switch was moved or stolen. In case of events, the
which can keep track of time always. The IPES-3416DSFP
IPES-3416DSFP will immediately send an email & SMS text
supports DMI interface that can correspond with DDM SFPs
message to pre-defined addresses as well as SNMP Traps out.
(Digital diagnostic monitor) to display the five parameters in
It provides 2DI and 2DO while disconnection of the specific port
Lantech’s UI, including optical output power, input power,
was detected; DO will activate the signal LED to alarm. DI can
temperature, laser bias current and transceiver supply
integrate the sensors for events and DO will trigger the alarm
voltage***. The TX power/RX power raw data is automatically
while sending alert information to IP network with email and
converted to dB values for installer, making it easier to calculate
traps.
the fiber distance. The complete CLI enables professional
engineer to configure setting by command line.
The optional environmental monitoring can detect switch overall
temperature, voltage and current where can send the SNMP
Lantech IPES-3416DSFP features ITU G.8032 ring which can
traps, email and SMS alert when abnormal.
be self-healed in less than 20ms for ring/chain topologies which
covers data & multicast* packets protection. The innovative
The Lantech IPES-3416DSFP is designed with dual power
auto-Ring configurator (auto mode) can calculate owner and
supply at 12/24/48VDC. Featured with relay contact alarm
neighbor in single ring which makes ITU G.8032 ring setup
function, the IPES-3416DSFP is able to connect with alarm
never been easier. It supports MSTP that allows RSTP over
system in case of power failure. The IPES-3416DSFP also
Vlan for redundant links. The ITU G.8032 Ring and RSTP can
provides ±4000V EFT and ±6000V ESD protection, which can
be co-existed in the same switch with different ports for the most
reduce unstable situation caused by power line and Ethernet.
flexible protection.
Lantech IPES-3416DSFP features high reliability and
The configuration file of Lantech IPES-3416DSFP can be
robustness coping with extensive EMI/RFI phenomenon,
exported in text file so that it can be edited and configured back
environmental vibration and shocks usually found in factory,
to switch with ease for mass deployment. The factory reset
substation, steel automation, aviation, mining and process
button can restore the setting back to factory default and built-in
control. It is the best solution for Automation, transportation,
watchdog design can automatically reboot the switch when
surveillance, Wireless backhaul, Semi-conductor factory and
CPU is found dead.
assembly lines.
The IPES-3416DSFP DIDO function can support additional
The -E model can be used in extreme environments with an
open/close physical contact for designate applications besides
operating temperature range of -40°C to 75°C.
FEATURES & BENEFITS

16 10/100TX + 4 100/1000M SFP w/16 PoE 802.3af/at

Injectors (Total 20 Ports Switch)

Embedded 16 PoE Injectors IEEE802.3af/at function
User friendly UI, auto topology drawing, topology
demo, complete CLI for professional setting

ITU G.8032 Ring protection in 20ms < 256 switches

to feed power up to 30W@54V; 15W @ 48V per port
for active operation

double ring

Built-in booster design allowing 12V or 24V input
and convert to 48V/53V output with PoE budget of
Ring protection coverage data and multicast*
packets

80W (12V input) and 120W (24V input)

Support various ring/chain topologies, including
PoE management including PoE detection and
Auto ring configuration(auto mode) for single
ring

scheduling for PD (power devices)
Co-exist with RSTP on different ports

Back-plane (Switching Fabric): 11.2Gbps

Provides EFT protection ±4000 VDC for power line.

16K MAC address table

Supports ±6000 VDC Ethernet ESD protection

DDM to support SFP diagnostic function***

LACP load balancing to distribute the load*

Automatically convert the raw data into dB

Built-in RTC (Real Time Clock) to keep track of time
values for TX power/RX power, making it easier

Supports IEEE 802.1p Class of Service, per port
to measure the fiber distance

9KB Jumbo frame supported on all ports
provides 8 priority queues Port base, Tag Base and
Type of Service Priority
Datasheet Version 1.0
www.lantechcom.tw | info@lantechcom.tw
3
Industrial PoE Managed Switches

IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP

Security
VLAN redundancy

SSL/SSH/ACL L2&L3

4K 802.1Q VLAN, Port based VLAN, GVRP**, QinQ*

Port Security: MAC address

Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info
can be viewed via Web/ Console/ Lantech
InstaConfig**/ Lantech

TM
entries/Filter/MAC-Port binding
TM

InstaView**
prevent unauthorized intruder.
DHCP server / client / Port&Vlan based DHCP
distribution / DHCP Option 82 supported


Bandwidth Control

Login Security: IEEE802.1X/RADIUS
Static multicast forwarding forward reversed IGMP
Ingress packet filter and egress rate limit
flow (MVR) with multicast packets binding with
Broadcast/multicast packet filter control
ports for IP surveillance application
Relay alarm output system events
Miss-wiring avoidance

LED indicator

Email, traps, or SMS notification

Multicast static route for non- IGMP camera to
prevent flooding; IGMP router port to assign query
in ring and for reversed multicast video flow

Multicast VLAN registration for metro video
Repowered auto ring restore

IGMPv1,v2,v3 with Query mode for multi media


Factory reset button to restore setting to factory
Ensure the switches in a ring to survive after
power breakout is back

default
The status can be shown in NMS when each

switch is back
TFTP/HTTP firmware upgrade; Lantech
Watchdog design to auto reboot switch CPU is
found dead
TM

InstaConfig** for multiple upgrade

Management access control with priority







IP Security: IP address security management to
Optional environmental monitoring for system input
voltage, current, ambient temperature
System Event Log, SMTP Email alert, SMS mobile

Supports DIDO (Digital Input/Digital Output)
(text) and SNMP Trap for alarm support; 32 RMON

IP30 metal housing with DIN rail and Wall-mount**
counters
design
DIMENSIONS (unit=mm)
Datasheet Version 1.0
www.lantechcom.tw | info@lantechcom.tw
4
Industrial PoE Managed Switches
SPECIFICATION
Hardware Specification
Temperature
Standards
IEEE802.3 10Base-T Ethernet
Power Supply
IEEE802.3u 100Base-TX
IEEE802.3z Gigabit fiber
12V model: 12/24/48VDC (9.5 to 56 VDC)
Standard model: 48VDC
PoE Budget
480W for 45~56V input
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
(55V input is recommended for 802.3at 30W
applications)
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
120W for 24V input (12V model)
80W for 12V input (12V model)
IEEE802.1s Multiple Spanning Tree
IEEE802.3ad Link Aggregation Control Protocol
PoE pin
assignment
(LACP)
IEEE802.1AB Link Layer Discovery Protocol (LLDP)
IEEE802.1X User Authentication (Radius)
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE802.3at/af Power over Ethernet
Switch
Architecture
Transfer Rate
RJ-45 port # 1~#16 support IEEE 802.3at/af
End-point, Alternative A mode. Per port provides
30W at 54~56VDC/15W at 48V~56VDC.
Positive (VCC+): RJ-45 pin 1,2.
Negative (VCC-): RJ-45 pin 3,6.
Power
10W
Consumption
Case Dimension
Metal case. IP-30,
Back-plane (Switching Fabric): 11.2Gbps
Packet throughput ability (Full-Duplex): 23.8Mpps
Weight
1000 g
@64bytes
Installation
DIN Rail and Wall Mount** Design
14,880pps for Ethernet port
EMI & EMS
FCC Class A,
CE EN61000-6-2, CE EN61000-6-4, CE
74 (W) x 135 (D) x 152 (H) mm
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber Ethernet port
EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4,
CE EN61000-4-5, CE EN61000-4-6, CE
CPU
Marvell 800Mhz
RAM
256M Byte
Flash
128M Byte
Mac Address
16K MAC address table
Jumbo frame
9KB on all ports
MTBF
NA
Connectors
10/100TX: 16 x ports RJ-45 with Auto MDI/MDI-X
function
Warranty
5 years
Mini-GBIC: 4 x 1000 SFP socket with DDM
RS-232 connector: RJ-45 type
Management
SNMP v1 v2c, v3/ Web/Telnet/CLI
SNMP MIB
RFC 1215 Traps MIB,
RFC 1213 MIBII
N61000-4-8, EN61000-4-11
Stability Testing
IEC60068-2-6 (Vibration)
Software Specification
Power & P-Fail connector: 1 x 6-pole terminal block
DIDO : 1 x 6-pole terminal block
Network Cable
RFC 1158 MIBII
RFC 1157 SNMP MIB,
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
RFC 1493 Bridge MIB,
RFC 1573 IF MIB
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
Optical Cable
RFC 2674 VLAN MIB,
Partial RFC 1643 EtherLike,
1.25Gbps:
Multi mode: 0 to 550 m, 850 nm (50/125 μm); 0 to 2
Partial RFC 1757 RMON,
RFC 2674 Q-Bridge MIB
km, 1310 nm (50/125 μm)
Single mode: 0 to 10 km/ 30 km/ 40 km, 1310 nm
RFC 2790 Host Resource MIB
LLDP MIB*
(9/125 μm); 0 to 50 km/ 60 km/ 80km/ 120 km, 1550
nm (9/125 μm)
125Mbps:
Multi mode: 0 to 2 km/ 5 km, 1310 nm (62.5/125 μm)
Single mode: 0 to 30 km, 1310 nm (62.5/125 μm)
WDM 1.25Gbps:
RSTP MIB*
Private MIB
ITU G.8032
Co-exist with RSTP on different ports
to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm
(9/125 μm)
PoE
PoE Detection to check if PD is hang up then restart
Management
the PD
WDM 125Mbps:
Single mode: 0 to 20 km/ 40 km/ 60 km/ 80 km, 1310
Per Port PoE
On/ Off, voltage, current, watts, temperature
nm (9/125 μm); 0 to 20 km/ 40 km/ 60 km/ 80 km,
1550 nm (9/125 μm)
User friendly UI
Protocol
CSMA/CD
LED
Per unit: Power 1 (Green), Power 2 (Green), P-Fail
(Red)
Status
Ethernet port: Link/Activity (Green), Speed (Green);
Mini-GBIC: Link/Activity (Green)
2 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
2 Digital Output(DO): Open collector to 40 VDC,
200mA
Operating
Support ITU G.8032 v2/2012 for Ring protection in
less than 20ms for self-heal recovery (basic mode)
Support various ring/chain topologies
Ring covers data & multicast* packets
Single mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1310
nm (9/125 μm); 0 to 80 km, 1490 nm (9/125 μm); 0
DI/DO
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
5% ~ 95% (Non-condensing)
Humidity
Operating
-20°C~60°C / -4°F~140°F (Standard model)
Temperature
-40°C~75°C / -40°F~167°F(-E model)
Storage
-40°C~85°C / -40°F~185°F


Auto topology drawing
Topology demo

Auto configuration for G.8032(auto mode)
for single ring

DDM threshold monitoring with dB
values***

Complete CLI for professional setting
Port Trunk with
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk
LACP
members
Load balancing through LACP to distribute load*
LLDP
Supports LLDP to allow switch to advise its
identification and capability on the LAN
CDP
Cisco Discovery Protocol for topology mapping
Environmental
System status for input voltage, current and ambient
Monitoring**
temperature to be shown in GUI and sent alerting if
any abnormal status(-M models)
VLAN
Port Based VLAN
Datasheet Version 1.0
www.lantechcom.tw | info@lantechcom.tw
5
Industrial PoE Managed Switches
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up
Pressure for Half-duplex
to 4K, VLAN ID can be assigned from 1 to 4096.)
GVRP** (256 Groups)**, QinQ
System Log
Supports System log record and remote system log
server
IPv6/4
Present
SMTP/Text SMS
Spanning Tree
Supports IEEE802.1d Spanning Tree and
Supports SMTP Server and 6 e-mail accounts for
receiving event alert; can send SMS text alert via
IEEE802.1w Rapid Spanning Tree, IEEE802.1s
Multiple Spanning Tree
Quality of Service
The quality of service determined by port, Tag and
IPv4 Type of service, IPv4 Differentiated Services
Code Points - DSCP
Class of Service
mobile
Relay Alarm
fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V
Protection
Support IEEE802.1p class of service, per port
provides 8 priority queues
IP Security
Supports 10 IP addresses that have permission to
access the switch management and to prevent
SNMP Trap
unauthorized intruder.
Login Security
Supports IEEE802.1X Authentication/RADIUS
Port Mirror
Support 3 mirroring types: “RX, TX and Both packet”
Network Security
Support 10 IP addresses that have permission to
access the switch management and to prevent
unauthorized intruder.
DHCP
DNS
Support IGMP snooping v1,v2,v3; Supports IGMP
SNTP
static route; 256 multicast groups; IGMP router port ;
IGMP query; GMRP**
Firmware Update
Multicast VLAN
Registration
MVR enables multicast packets go through VLAN
for VOD application
Bandwidth
Support ingress packet filter and egress packet limit.
Control
The egress rate control supports all of packet type.
Ingress filter packet type combination rules are
Broadcast/Multicast/Flooded Unicast packet,
Broadcast/Multicast packet, Broadcast packet only
and all types of packet.
The packet filter rate can be set an accurate value
through the pull-down menu for the ingress packet
filter and the egress packet limit.
RTC
Built-in Real Time Clock to keep track of time always
Flow Control
Supports Flow Control for Full-duplex and Back
Miss-wiring avoidance
Repowered auto ring restore

Loop protection
Up to 3 trap stations; trap types including:

Device cold start


Authorization failure
Port link up/link down


DI/DO open/close
PoE port event

Environmental abnormal**
Provide DHCP Client/ DHCP Server/DHCP Option
Provide DNS client feature and support Primary and
Secondary DNS server.
SSL/ SSH for Management
IGMP


82/Port based&VLAN based DHCP distribution
(DHCP relay agent)
802.1X access control for port based and MAC
based authentication/MAC-Port binding
Management access control with priority
256 Policy based Access Control List
Provides one relay output for port breakdown, power
Supports SNTP to synchronize system clock in
Internet
Supports TFTP firmware update, TFTP backup and
restore; HTTP firmware upgrade; Lantech
InstaConfig** for multiple upgrade
TM
Configuration
upload and
Supports text configuration file for system quick
installation; Support factory reset button to restore
download
all settings back to factory default; USB for auto
restore/backup
IfAlias
Each port allows an alphabetic string of 128-byte
assigned as its own unique name via the SNMP or
CLI interface
*Future release
**Optional
***Optional DDM SFP required
ORDERING INFOMATION

IPES-3416DSFP…….……..….….......P/N: 8350-796
16 10/100TX PoE at/af up to 30W + 4 100/1000M SFP L2+ Managed Industrial PoE Switch; -20°C to 60°C; 48VDC power input

IPES-3416DSFP-E…………….….......P/N: 8350-797
16 10/100TX PoE at/af up to 30W + 4 100/1000M SFP L2+ Managed Industrial PoE Switch; -40°C to 75°C; 48VDC power input

IPES-3416DSFP-M…….…..….….......P/N: 8350-798
16 10/100TX PoE at/af up to 30W + 4 100/1000M SFP L2+ Managed Industrial PoE Switch w/environmental monitoring; -20°C
to 60°C; 48VDC power input

IPES-3416DSFP-M-E…………….......P/N: 8350-799
16 10/100TX PoE at/af up to 30W + 4 100/1000M SFP L2+ Managed Industrial PoE Switch w/environmental monitoring; -40°C
to 75°C; 48VDC power input

IPES-3416DSFP-12V…….……..........P/N: 8350-7962
16 10/100TX PoE at/af up to 30W + 4 100/1000M SFP L2+ Managed Industrial PoE Switch; -20°C to 60°C; 12/24/48VDC
power input

IPES-3416DSFP-12V-E……………....P/N: 8350-7972
16 10/100TX PoE at/af up to 30W + 4 100/1000M SFP L2+ Managed Industrial PoE Switch; -40°C to 75°C; 12/24/48VDC
power input

IPES-3416DSFP-12V-M…….……......P/N: 8350-7982
16 10/100TX PoE at/af up to 30W + 4 100/1000M SFP L2+ Managed Industrial PoE Switch w/environmental monitoring; -20°C
to 60°C; 12/24/48VDC power input

IPES-3416DSFP-12V-M-E……….......P/N: 8350-7992
16 10/100TX PoE at/af up to 30W + 4 100/1000M SFP L2+ Managed Industrial PoE Switch w/environmental monitoring; -40°C
to 75°C; 12/24/48VDC power input
Datasheet Version 1.0
www.lantechcom.tw | info@lantechcom.tw
6
Industrial PoE Managed Switches
OPTIONAL ACCESSORIES
55VDC DIN Rail Power for 802.3at Applications
 AD1240-48S-5
48~56VDC, 4.3A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp.
-20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
48~56VDC, 6.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp.
-20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
48~56VDC, 9A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
 AD1360-48S-5
 AD1500-48S-5
Mini GBIC (SFP)
 8330-162
 8330-163
 8330-165
 8340-0591
 8330-166
 8330-169
 8330-167
 8330-170
 8330-168
 8330-061
 8330-060
MINI GBIC 1000SX (LC/0.5km) Transceiver
MINI GBIC 1000SX2 (LC/2km) Transceiver
MINI GBIC 1000LX (LC/10km) Transceiver
MINI GBIC 1000LHX (LC/40km) Transceiver
MINI GBIC 1000XD (LC/50km) Transceiver
MINI GBIC 1000XD (LC/60km) Transceiver
MINI GBIC 1000ZX (LC/80km) Transceiver
MINI GBIC 1000EZX (120km) Transceiver
MINI GBIC 1000T (100m) Transceiver
100Base LX 30KM, Single-mode, LC Transceiver
100Base FX 2KM, Multi-mode, LC Transceiver
 8330-188
 8330-189
 8330-186
 8330-187
 8330-180
 8330-182
 8330-181
 8330-183
 8330-184
 8330-185
LTSFP-1000BX-10KM Transceiver (WDM 1310)
LTSFP-1000BX-10KM Transceiver (WDM 1550)
LTSFP-1000BX-20KM Transceiver (WDM 1310)
LTSFP-1000BX-20KM Transceiver (WDM 1550)
LTSFP-1000BX-40KM Transceiver (WDM 1310)
LTSFP-1000BX-40KM Transceiver (WDM 1550)
LTSFP-1000BX-60KM Transceiver (WDM 1310)
LTSFP-1000BX-60KM Transceiver (WDM 1550)
LTSFP-1000BX-80KM Transceiver (WDM 1490)
LTSFP-1000BX-80KM Transceiver (WDM 1550)
All SFP ended with D are with Diagnostic function
Wall Mount Bracket
MBEAR001
Wall mount bracket for 74.15(W) x 114.3 (D) x 152 (H) mm Industrial switches
Lantech Communications Global Inc.
www.lantechcom.tw
info@lantechcom.tw
© 2014 Copyright Lantech Communications Global Inc. all rights reserved.
The revise authority rights of product specifications belong to Lantech Communications Global Inc.
Lantech may make changes to specification and product descriptions at anytime, without notice.
Datasheet Version 1.0
www.lantechcom.tw | info@lantechcom.tw