7711A Coax - VideoFlex®Snake Cable for Precision

7711A Coax - VideoFlex®Snake Cable for Precision Analog and Digital Video
For more information please
call
1-800-Belden1
See Put-ups and Colors
Description:
4 coaxial cables. Each coax 18 AWG .040 solid bare copper conductors, gas-injected foam HDPE insulation, Duofoil® and a 95% tinned
copper braid shield, inner PVC jacket, overall PVC jacket.
SUITABLE APPLICATIONS:
Suitable Applications
Video Mult.
PHYSICAL CHARACTERISTICS:
CONDUCTOR:
Number of Coax
4
Total Number of Conductors
4
RG Type
6/U
AWG
18
Stranding
Solid
Conductor Diameter
.040 in.
Conductor Material
BC - Bare Copper
INSULATION:
Insulation Material
Gas-injected FHDPE - Foam High Density Polyethylene
Insulation Diameter
.180 in.
INNER SHIELD:
Inner Shield Material Trade Name
Duofoil®
Inner Shield Type
Tape/Braid
Inner Shield Material :
Layer Number
1
Trade Name
Duofoil®
Type
Tape
2
Braid
Inner Shield %Coverage
100 %
Material
Aluminum Foil-Polyester
Tape-Aluminum Foil
TC - Tinned Copper
INNER JACKET:
Inner Jacket Material
PVC - Polyvinyl Chloride
Inner Jacket Diameter
.275 in.
Inner Jacket Color Code Chart :
Page 1 of 4
% Coverage (%)
100
95
7711A Coax - VideoFlex®Snake Cable for Precision Analog and Digital Video
Number
1
2
3
4
Color
Red
Green
Blue
Yellow/White
OUTER JACKET:
Outer Jacket Material
PVC - Polyvinyl Chloride
OVERALL NOMINAL DIAMETER:
Overall Nominal Diameter
.900 in.
MECHANICAL CHARACTERISTICS:
Operating Temperature Range
-40°C To +75°C
UL Temperature Rating
60°C
Non-UL Temperature Rating
75°C
Bulk Cable Weight
303 lbs/1000 ft.
Max. Recommended Pulling Tension
276 lbs.
Min. Bend Radius (Install)
9 in.
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:
APPLICABLE STANDARDS:
NEC/(UL) Specification
CMR
CEC/C(UL) Specification
CMG
AWM Specification
UL Style 1354 (each coax); UL Style 2688 (overall)
FLAME TEST:
UL Flame Test
UL1666 Vertical Shaft
SWEEP TEST:
Sweep Testing
Sweep tested 5 MHz to 3 GHz.
SUITABILITY:
Suitability - Indoor
Yes
Suitability - Outdoor
Yes
Suggested Connectors
Kings 2065-10-9 75 Ohm BNC, each coax
PLENUM/NON-PLENUM:
Plenum (Y/N)
N
ELECTRICAL CHARACTERISTICS:
Nom. Characteristic Impedance
75 Ohms
Nom. Capacitance Conductor to Shield
16.3 pF/ft
Nominal Velocity of Propagation
82 %
Page 2 of 4
7711A Coax - VideoFlex®Snake Cable for Precision Analog and Digital Video
Nominal Delay
1.24 ns/ft
Nom. Conductor DC Resistance @ 20 Deg. C
6.4 Ohms/1000 ft
Nom. Inner Shield DC Resistance:
3.0 Ohms/1000 ft
Minimum Structural Return Loss :
Description
Frequency (MHz)
Start Frequency (MHz)
Stop Frequency (MHz)
5
851
850
3000
Start Frequency (MHz)
Stop Frequency (MHz)
Minimum Structural
Return Loss (dB)
23
15
Nom. Attenuation :
Description
Frequency (MHz)
1
3.58
5
7
10
67.5
71.5
88.5
100
135
143
180
270
360
540
720
750
1000
1500
2000
2250
3000
Nom. Attenuation
(dB/100 ft.)
0.24
.45
.54
.63
.72
1.57
1.60
1.75
1.84
2.10
2.16
2.42
2.97
3.43
4.25
4.95
5.00
5.89
7.33
8.57
9.14
10.67
Max. Operating Voltage - UL
300 V RMS
Other Electrical Characteristic 1
Impedance tested in accordance with ASTM D-4566 paragraph 43.2, option 2 using
a 75 Ohm fixed bridge and termination.
Other Electrical Characteristic 2
Return Loss tested in accordance with ASTM D-4566 paragraph 45.3, using a 75
Ohm fixed bridge and termination.
PUT-UPS AND COLORS:
Item
Description
7711A B591000
4 #18 PE SH PVC
FRTPE
7711A B59500
4 #18 PE SH PVC
FRTPE
Put-Up (ft.)
1000
Ship Weight (lbs.)
348
Jacket Color
BLACK, MATTE
Notes
CZ
500
178.5
BLACK, MATTE
CZ
Page 3 of 4
7711A Coax - VideoFlex®Snake Cable for Precision Analog and Digital Video
C = CRATE REEL PUT-UP.
Z = FINAL PUT-UP LENGTH MAY VARY (+ OR -) 10% FOR SPOOLS OR REELS AND (+ OR -) 5% FOR UNREEL CARTONS
FROM LENGTH SHOWN.
Revision Number: 2
Revision Date: 09-24-2004
© 2003 Belden Wire & Cable Company
All Rights Reserved.
Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication,
information and specifications described herein are subject to error or omission and to change without notice, and the listing of such
information and specifications does not ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,
statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or
exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described
herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Page 4 of 4