HDMI Receiver
Extend HDMI or DVI over single Cat 5e/6 up to 230 ft (70 m)
Full HD support 1080p deep color, 3D, and 4K x 2K
HDCP Compliant with pass-thru EDID from display to source
Supports virtually all HD and PC resolutions
Supports HDMI Audio
Locking HDMI connector
Universal power supply included
Uncompressed digital video extension guarantees 100% fidelity
Plug and play, no configuration required
Compact metal enclosure with mounting provisions
Reliable, trouble free operation
100% designed and manufactured in the USA
RXUH-1BT is used to extend HDMI or DVI video signals up to 230 ft over inexpensive UTP (Cat6) cable
using HDBaseT™ Class B (HDBaseT-Lite™) technology. Video and embedded audio signals are transmitted without any compression to the remote for a 100% identical reproduction even at resolutions of
The RXUH-1BT requires use with TXUHBX-S transmitter. This requires the use of a PoH inserter,which is
included. The 511-POH-17W is a PoH compliant power inserter that can be used to power one end of an
HDBaseT™ link. It passes the UTP signals across while at the same time injects 48v power for the PD
(powered device). The supply complies with the IEEE 802.3af and will only apply power to the cable if a
compliant device is connected.
The extender is HDCP compliant with pass-thru EDID. It supports embedded audio, Full HD, deep color
(1080p@60Hz @ 48 bits/pixel), 3D video, and 4Kx2K resolution. Secondary data channels such as: DDC,
CEC, and HPD (Hot-Plug Detect) are also transparently extended. Plug and play operation with no user
adjustments offer a truly trouble-free experience.
801 North East Street • Frederick, MD 21701 • 301-620-9130 • 800-546-4724 • FAX 301-620-9103
HDMI Receiver
Max Distance:
230 ft (70m)
Signal Type:
Video Standards:
DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including
12 bit color depth, 3D video and 4K support)
Locking HDMI
Video Resolutions: DVI: VGA (640x480) to WUXGA (1920x1200)
HDTV: 480i to 1080p
Digital Cinema: 4K (4096x2160)
All HDMI Embedded Audio
Pass-Thru DDC for reading EDID directly from remotely connected LCD
and HDCP handshake
Pass-Thru DDC for Consumer Electronics Control compatible devices
Power Supply:
100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2.6 A, regulated
4.25 W max
Nominal Power:
Sender: 2.25 W max
Storage: -40 to 158 °F (-40 to 70 °C)
Operating: 32 to 104 °F (0 to 40 °C)
10% to 90%, non-condensing
Metal (Steel ends and Aluminum extrusion)
Block Diagram
End plates have L bracket with hole for surface mounting
1.18" H x 2.75" W x 3.85" D
30mm H x 70mm W x 98mm D
(Depth excludes connectors)
Product: 0.75 lb (0.35 kg)
801 North East Street • Frederick, MD 21701 • 301-620-9130 • 800-546-4724 • FAX 301-620-9103
Download PDF
Similar pages