poWer caBle accessories
12 kV up to 42 kV
completing the picture
based on experience is the future
nkt cables GmbH
NKT was established in 1891 as cable manufacturer. In 1999
The product range covers cable joints, cable connectors for
NKT A/S Denmark merged with Felten & Guilleaume Kabel-
SF6-switchgears and transformers as well as indoor- and
werke GmbH in Germany to form nkt cables group GmbH
outdoor terminations. These types of cable accessories are
with headquarters in Cologne. nkt cables group GmbH is
used for single- and 3-core cables as well as for paper in-
owned by NKT Holding A/S, an industrial group of compa-
sulated cables.
nies employing 9.110 people.
As the first company introducing silicone rubber termina-
nkt cables group GmbH bundles the expertise of around
tions already in the sixties, nkt cables GmbH, Nordenham
2.500 employees in 10 production and development facili-
is specialized in production of silicone rubber power cable
ties spread over five European countries and P.R. China.
accessories.
Manufacturing and developing power cable accessories up
to 42 kV is one of the core businesses of nkt cables group
GmbH. Since more than 60 years nkt cables GmbH Nordenham, Germany (formerly F&G Kabelgarnituren GmbH) is
one of the world market leaders in power cable accessories.
Content
general
cable accessories/silicone rubber
4
Stress control
5
12 kV
Terminations
7
8-9
Cable connectors and adapters
10-15
Joints
16-19
12 kV
Test requirements
24 kV
21
Terminations
22-23
Cable connectors and adapters
24-30
Joints
31-33
24 kV
Test requirements
36 kV
Terminations
36-37
Cable connectors and adapters
38-42
Joints
43
inner cone system
Inner cone plug 36 kV
35
46-47
Surge arrester
48
Final plug
49
inner cone
Test requirements
Accessories
51-57
Tools
58-59
Pre-assembled connection cables
60
Connection types and coupling possibilities
61
3
auxiliary
auxiliary information
applications for cable accessories
Applicationsfor
forcable
cableaccessories
accessories
Applications
ble accessories
2
2
2
silicone rubber
2
2
Silicone rubber is a preferred material for cable accessories
outstanding features of the silicone rubber insulation
due to its excellent mechanical and electrical properties.
material are:
For more than 40 years silicone has been used successfully
✓ uV and ozone resistance
as high-quality electrical insulation for voltages up to 400
✓ durable water rejection
kV. Silicone rubber features high quality electrical insulation,
✓ weather and aging resistance
superior corona and tracking resistance, combined with high
✓ non-flammable, self-extinguishing, heat resistant
elasticity.
✓ applicable for use at temperatures between -50° C
It facilitates multi range application, where one silicone rubber
✓ high elasticity
body can be used for various conductor cross sections. optimal flexibility ensures easy assembly of the accessories.
and +180° C
✓ high tracking resistance
✓ unlimited storage life
✓ friendly to the enviroment
General
Stress control
The specific electrical problems of the cable termination are
Figure 2 shows the field of the cable termination controlled
found at the point between the high-grade solid electrical
capacitively by a funnel shaped electrode. It is dimensioned
insulation of the cable and the gaseous insulation air which
in such a way that field intensities do not exceed at any
has a significantly lower dielectric strength.
point. This prevents harmful corona or partial discharge.
In order to achieve sufficient insulating clearance, the outer
conductive layer of the cable must be stripped to below the
end of the core. This causes unacceptably high field intensities at the end of the outer conductive layer (figure 1) which
must be eliminated by means of special measures.
Conductor
Conductor
Core isulation
Core isulation
Equipotential lines
Equipotential lines
Field lines
Field lines
Stress cone
Outer conductive layer
Outer
conductive layer
Screening wires
Screening wires
Outer sheath
Electrical field without stress control (Figure 1)
Outer sheath
Electrical field with capacitive stress control (Figure 2)
5
12 kV
Test requirements
6/10 (12 kV)
test requirements
according to CENELEC HD 629.1 S1 + A1 und VDE 0278-part 629-1
Test
voltage
6/10(12)
1.25 U0
7.5 kV
No breakdown, no flashover.
Less than 3 ignitions.
No visual damages.
2 U0
12 kV
Partial discharge:
max. 10 pC: XLPE
max. 20 pC: PVC
Thermal cycling and AC
15 min and 500 h
2.5 U0
15 kV
No breakdown, no flashover.
AC 5 min
4.5 U0
27 kV
No breakdown, no flashover.
6 U0
36 kV
No breakdown, no flashover.
75 kV
No breakdown, no flashover.
Humidity and salt fog
Partial discharge
DC 15 min
Impulse withstand voltage ± 10 x
Specified voltage U0/U (Um) kV
Requirements
12 kV
Test
notes
7
Indoor termination for 6/10 (12) kV
TI 12
12 kV
TI 12 is an indoor termination made of silicone rubber for connection to air insulated switchgear and transformers up to 12
kV. Type tests according to CENELEC HD 629.1 and VDE 0278
part 629-1 have been successfully passed. For conductor cross
sections from 185 up to 630 mm² the indoor termination type TI
24 CA and/or TI 36 CA applies.
✓ schnelle und einfache Montage
✓ quick and easy assembly
✓ one-piece design with integrated capacitive stress control system
✓ short body
✓ long creepage distance by optimized shed arrangement
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ 2 sizes cover the range of conductor cross sections up to
240 mm²
✓ weight of the TI 12 basic set ~ 0.38 kg
d
1
2
D
L1
25
~40
Scope of delivery
3
✓ 3 terminations
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 1 assembly instructions
✓ accessories
1
cable lug
2
termination
3
earthing cable lug
TI 12
Conduc- Size
Stretch
Dimensions
Reference no.
tor cross
range over
d
D
L1 Basic set
with cable lug
section
insulation (mm) (mm) (mm) without
AlCu(mm²)
(mm)
cable lug conductor conductor
25
35
50
70
95
120
150
185
240
2
12.7 - 19.2
39
12.5
3
17.0 - 28.4
43
17
26 291 51
26 291 52
26 291 91
26 291 53
26 291 54
max.
26 291 55
230
26 291 56
26 291 92 26 291 57
26 291 58
-
26 291 01
26 291 02
26 291 03
26 291 04
26 291 05
26 291 06
26 291 07
26 291 08
26 291 09
TI 24 CA for 6/10 (12) kV
Conductor
cross
section
(mm²)
Size
Stretch range
over insulation (mm)
d
(mm)
Dimensions
D
(mm)
21.2 - 34.6
17
60
185
240
5
Reference no.
L1 (mm)
300
with cable lug
AlCuconductor conductor
max.
340
26 457 78 26 457 28
26 457 79 26 457 29
26 457 80 26 457 30
TI 36 CA for 6/10 (12) kV
Conductor
cross
section
(mm²)
Size
Stretch range
over insulation (mm)
400
500
27
28.9 - 43.0
630
Illustration see page 36
Dimensions
d
(mm)
17
21
Reference no.
D
(mm)
L1
(mm)
90
max.
485
with cable lug
AlCuconductor conductor
26 447 61 26 447 11
26 447 62 26 447 12
-
26 447 13
Additional solutions
All terminations can be used on 3-core XPLE
cables with a corresponding trifurcating set
trifurcating set
details see page 15
TI 24 CA
Terminations
Outdoor termination for 6/10 (12) kV
TO 12
✓ quick and easy assembly
✓ one-piece design with integrated capacitive stress control system
✓ short body
✓ long creepage distance and large dry zones
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ 1 size covers the range of conductor cross sections from
95 up to 240 mm²
✓ weight of the TO 12 basic set ~ 1.1 kg
d
1
2
1
cable lug
2
termination
3
sealing tape
4
earthing cable lug
D
L1
25
3
Scope of delivery
✓ 3 terminations
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 1 assembly instructions
✓ accessories
12 kV
TO 12 is an outdoor termination made of silicone rubber for overhead link and other outdoor applications up to 12 kV. Type tests
according to CENELEC HD 629.1 and VDE 0278 part 629-1 have
been successfully passed. For conductor cross sections from 185
up to 630 mm² the outdoor termination type TO 24 CA and/or TO
36 CA applies.
~40
4
TO 12
Conduc- Size Stretch
Dimensions
Reference no.
tor cross
range over d
D
L1 Basic set
with cable lug
section
insulation (mm) (mm) (mm) without
AlCu(mm²)
(mm)
cable lug conductor conductor
95
120
150
185
240
17.0 28.4
3
12.5
17
26 292 55
26 292 56
max.
60
26 292 92 26 292 57
300
26 292 58
-
26 292 05
26 292 06
26 292 07
26 292 08
26 292 09
Size
Stretch range
Dimensions
over insulatid
D
L1 (mm)
on (mm)
(mm)
(mm)
185
240
5
21.2 - 34.6
17
FP 20 K with porcelain insulator
and integrated push-on element
made of silicone rubber
Details upon request
TO 24 CA for 6/10 (12) kV
Conductor
cross
section
(mm²)
Additional solutions
90
300
max.
400
TO 24 CA
Reference no.
with cable lug
AlCuconductor conductor
26 303 78 26 303 28
26 303 79 26 303 29
26 303 80 26 303 30
TO 36 CA for 6/10 (12) kV
Conductor
cross
section
(mm²)
Size
Stretch range
Dimensions
over insulatid
D
L1 (mm)
on (mm)
(mm)
(mm)
400
500
27
28.9 - 43.0
630
17
21
156
max.
485
Reference no.
with cable lug
AlCuconductor conductor
26 445 61 26 445 11
26 445 62 26 445 12
-
26 445 13
Illustration see page 37
9
Elbow connector 250 A/400 A for 6/10 (12) kV
EASW 10/250
12 kV
EASW 10/250 is a screened elbow cable connector made
of silicone rubber for cable connection to switchgear and
transformers up to 12 kV with bushings type A (250 A) according
to EN 50180, EN 50181 and DIN 47636. Type tests according
to VDE 0278 part 629-1 have been successfully passed. *For
conductor cross sections from 95 mm² the connector type
CE24-250 applies.
✓ quick and easy assembly
✓ one piece design with integrated capacitive stress control
system
✓ screening by outer conductive layer
✓ cable sheath testing without dismantling of connector
✓ metal housing or capacitive measuring point (optional)
✓ weight of the EASW 10/250 ~ 2.2 kg
Scope of delivery
1
bushing
✓ 3 cable connectors
✓ 3 conductor cable lugs
✓ 3 contact pins
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
contact pin
3
cable lug
4
connector body
5
sealing tape
6
earthing cable lug
EASW 10/250 with bail restraint fixing
Conductor
cross
section
(mm²)
Size
Stretch
range over
insulation
(mm)
Reference no. with cable lug
without measuring
point
~125
~78
2
1
3
~222
4
25
5
~40
with measuring point
AlCuAlCuConductor Conductor Conductor Conductor
25
35
50
26 311 71 26 311 31 26 313 81 26 313 71
2
12.7 - 19.2
70
95
120
26 311 72 26 311 32 26 313 82 26 313 72
6
26 311 73 26 311 33 26 313 83 26 313 73
26 311 74 26 311 34 26 313 84 26 313 74
16*
16,9 - 25.0
26 364 55 26 364 05 26 366 55 26 366 05
26 364 56 26 364 06 26 366 56 26 366 06
EASW 10/250 with metal flange / housing
Conductor
cross
section
(mm²)
Size
Stretch
range over
insulation
(mm)
Reference no. with cable lug
without measuring
point
without metal housing
without measuring
point
with metal housing
AlCuAlCuConductor Conductor Conductor Conductor
Additional solutions
25
26 311 61 26 311 11 26 310 61 26 310 11
35
26 311 62 26 311 12 26 310 62 26 310 12
CE 24-250
(S. 10+24)
EASW
10/250
with metal housing
50
2
12.7 - 19.2
16*
16.9 - 25.0
70
95
120
26 311 63 26 311 13 26 310 63 26 310 13
26 311 64 26 311 14 26 310 64 26 310 14
26 402 55 26 402 05 26 401 55 26 401 05
26 402 56 26 402 06 26 401 56 26 401 06
CE 24-400 with capacitive measuring point for 6/10 (12) kV
for bushing type B (400 A)
Conductor
cross
section
(mm²)
Size of
stress cone
Stretch
range over
insulation
(mm)
Reference no.
Basic set
without
cable lug
with cable lug
Alconductor
Cuconductor
25
26 416 51
26 416 01
35
26 416 52
26 416 02
50
70
type 02
12.7 - 25.0
26 416 92
26 416 53
26 416 03
26 416 54
26 416 04
95
26 416 65
26 416 15
120
26 416 66
26 416 16
150
26 416 67
26 416 17
185
26 416 58
26 416 08
26 416 59
26 416 09
26 416 60
26 416 10
240
300
type 03
21.2 - 34.6
26 416 93
CB 36-400 (S. 26)
CE 24-400 (S. 10+24)
CE 24-400
for bushings type B
Cable connectors + adapters
Straight connector 250 A for 6/10 (12) kV
EASG 10/250
✓ quick and easy assembly
✓ integrated capacitive stress control system
✓ screening by outer conductive layer
✓ cable sheath testing without dismantling of connector
✓ capacitive measuring point (optional)
✓ weight of the EASG 10/250 ~ 2.2 kg
Scope of delivery
1
bushing
✓ 3 cable connectors
✓ 3 contact pins
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
contact pin
3
bail restraint
4
connector body
5
sealing tape
6
earthing cable lug
Ø32,5
1
12 kV
EASG 10/250 is a screened straight cable connector made of
silicone rubber for cable connection to switchgear and transformers up to 12 kV with bushings type A (250 A) according to
EN 50180, EN 50181 and DIN 47636. Type tests according to
VDE 0278 part 629-1 have been successfully passed.
58
2
3
4
~290
25
EASG 10/250 with bail restraint fixing
Conductor
cross
section
(mm²)
Size
Stretch range
over insulation (mm)
50
with measuring point
26 317 51 26 317 01 26 317 81 26 317 71
2
12.7 - 20.0
3
17.0 - 25.0
70
95
without measuring
point
26 317 52 26 317 02 26 317 82 26 317 72
26 317 54 26 317 04 26 317 84 26 317 74
Size
Stretch range
over insulation (mm)
26 317 55 26 317 05 26 317 85 26 317 75
Additional solutions
50
without measuring
point
EASG 10/250 with metal flange fixing,
capacitive measuring point (optional)
with measuring point
26 317 61 26 317 11 26 317 41 26 317 21
2
12.7 - 20.0
3
17.0 - 25.0
70
95
Reference no. with cable lug
AlCuAlCuConductor Conductor Conductor Conductor
25
35
6
26 317 53 26 317 03 26 317 83 26 317 73
EASG 10/250 with metal flange
Conductor
cross
section
(mm²)
~40
AlCuAlCuConductor Conductor Conductor Conductor
25
35
5
Reference no. with cable lug
26 317 62 26 317 12 26 317 42 26 317 22
26 317 63 26 317 13 26 317 43 26 317 23
26 317 64 26 317 14 26 317 44 26 317 24
26 317 65 26 317 15 26 317 45 26 317 25
11
Cable connector 630 A for 6/10 (12) kV
CB 12-630
~190
~110
12 kV
CB 12-630 is a screened cable connector made of silicone rubber for cable connection to switchgear and transformers up to
12 kV with bushings type C (630 A) according to EN 50180, EN
50181 and DIN 47636. Type tests according to CENELEC HD
629.1 and VDE 0278 part 629-1 have been successfully passed.
✓ quick and easy assembly
✓ screening by outer conductive layer
✓ integrated stress control system
✓ only 2 versions cover 25 up to 300 mm²
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ cable sheath testing without dismantling of connector
✓ capacitive measuring point
✓ weight of the CB 12-630 basic set ~ 4.4 kg
Scope of delivery
1
insulating plug
✓ 3 cable connectors
✓ 3 stress cones
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
covering cap
3
cable lug
4
connector body
5
stress cone
6
sealing tape
7
earthing cable lug
25
35
50
70
95
120
150
185
240
300
95
120
150
185
240
300
Size of
stress cone
Stretch
range over
insulation
(mm)
Basic set
without
cable lug
type 02
12.7 - 25.0
26 323 92
type 03
21.2 - 34.6
26 323 93
Typ 23
17,0 - 32,6
2
Ø~77
3
~245
4
5
6
25
~40
7
Cable adapter for 630 A
CB 12-630 (screened)
Conductor cross
section
(mm²)
1
26 323 97
Reference no.
with cable lug
AlCuconductor conductor
26 323 51 26 323 01
26 323 52 26 323 02
26 323 53 26 323 03
26 323 54 26 323 04
26 323 65 26 323 15
26 323 66 26 323 16
26 323 67 26 323 17
26 323 58 26 323 08
26 323 59 26 323 09
26 323 60 26 323 10
26 321 35
26 321 36
26 321 37
26 321 38
26 321 39
26 321 40
26 321 75
26 321 76
26 321 77
26 321 78
26 321 79
26 321 80
AB 12-630 without outer conductive layer
Cable connectors + adapters
Coupling connector 630 A for 6/10 (12) kV
CC 12-630
✓ only ~290 mm installation depth
✓ quick and easy assembly
✓ screening by outer conductive layer
✓ integrated stress control system
✓ only 2 versions cover 25 up to 300 mm²
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ cable sheath testing without dismantling of connector
✓ capacitive measuring point
✓ weight of the CC 12-630 basic set ~ 4.9 kg
110
~290
100
1
2
Ø~77
12 kV
CC 12-630 is a screened coupling connector made of silicone
rubber for double cable connection. It is linked directly to cable
connector CB 12-630.
3
4 ~245
5
25
~40
Scope of delivery
1
insulating plug
6
✓ 3 coupling connectors
✓ 3 stress cones
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
covering cap
7
3
cable lug
4
connector body
5
stress cone
6
sealing tape
7
earthing cable lug
Additional solutions
CC 12-630 (screened)
for connection with CB 12-630
Conductor cross
section
(mm²)
25
35
50
70
95
120
150
185
240
300
Size of
stress cone
Stretch
range over
insulation
(mm)
Basic set
without
cable lug
type 02
12.7 - 25.0
26 353 92
type 03
21.2 - 34.6
26 353 93
Reference no.
with cable lug
AlCuconductor conductor
26 353 51 26 353 01
26 353 52 26 353 02
26 353 53 26 353 03
26 353 54 26 353 04
26 353 65 26 35315
26 353 66 26 353 16
26 353 67 26 353 17
26 353 58 26 353 08
26 353 59 26 353 09
26 353 60 26 353 10
95
26 351 35
26 351 75
120
26 351 36
26 351 76
150
26 351 37
26 351 77
26 351 38
26 351 78
240
26 351 39
26 351 79
300
26 35140
26 351 80
185
Typ 23
17,0 - 32,6
26 353 97
AB 12-630 with AC 12-630, both
without outer conductive layer
13
Surge arrester for 6/10 (12) kV
CSA 12
12 kV
CSA 12 is a metal oxide surge arrester with silicone rubber
connector housing. It protects medium voltage networks, e. g.
transformers, switchgears and cables. Incoming overvoltage
waves and voltage increase by reflection are limited. Minimum
total length is achieved by direct link of the surge arrester to cable connector CB 12-630 or to coupling connector CC 12-630.
~110
~290
~100
2
1
3
Ø~77
✓ only ~290 mm installation depth
✓ quick and easy assembly
✓ integrated stress control system
✓ capacitive measuring point
✓ weight of the CSA 12-5 ~ 5.7 kg
Scope of delivery
✓ 3 surge arresters
✓ 3 threaded bolts
✓ 3 earthing strands (preassembled)
✓ 1 assembly instruction
✓ accessories
1
threaded bolt
2
insulating plug
3
covering cap
4
surge arrester
5
earthing cable lug
CSA 12-5
continuous operating voltage Uc
ASA 12-10
12 kV
12 kV
rated voltage Ur
15 kV
15 kV
nominal discharge current In
5 kA
10 kA
partial discharge at 12 kV
< 5 pC
< 5 pC
- steep current impulse 5/10 kA, 1/20 µs
42.4 kV
42.8 kV
- long duration current impulse 125 A, 30/75 µs
30.2 kV
30.1 kV
- lightning current impulse 5/10 kA, 8/20 µs
40.0 kV
40.0 kV
residual voltage at:
Type
Reference no.
CSA 12-5
26 357 04
CSA 12-10
26 357 54
ASA 12 (unscreened)
Type
Reference no.
ASA 12-5
26 359 04
ASA 12-10
26 359 54
Further alternatives concerning continuos operating
voltage Uc and nominal discharge current In upon
request.
4
5
CSA 12-10
ASA 12-5
CSA 12 (screened)
225
Surge arrester
ASA 12 is the unscreened alternative for direct
link to cable adapter AB 12-630 or to coupling
adapter AC 12-630.
Cable connectors + adapters
Trifurcating set for 6/10 (12) kV
ATS
Scope of delivery
1
outer sleeve (3 x 1 m)
✓ 3 outer sleeves
✓ 1 trifurcating cap
✓ 1 assembly instructions
✓ accessories
2
trifurcating cap
3
copper wire
4
sealing tape
5
earthing strand
12 kV
ATS facilitates a single core breakout of a 3-core cable and seals
the cable end. Insulating tubes protect the cores and semi-conductive stops provide a perfect match with terminations and
cable connectors.
ATS for tape screened cables
Conductor cross section
Reference no.
(mm²)
25 - 70
21 231 12
95 - 150
21 231 13
185 - 300
21 231 14
1
2
3
ATS for wire screened cables
Conductor cross section
Reference no.
(mm²)
4
5
25 - 70
21 229 01
95 - 150
21 229 02
185 - 300
21 229 03
ATS for special cable or contact spring versions upon request.
15
Straight joint for 6/10 (12) kV
2
3
4
12 kV
1
5
6
7
~925
JS 24-E for 6/10 (12) kV
JS 24-E for 6/10 (12) kV is a straight joint with joint body made
of silicone rubber for plastic insulated cables up to 12 kV. Type
tests according to CENELEC HD 629.1 and VDE 0278 part 629-1
have been successfully passed.
✓ quick and easy assembly
✓ premoulded joint body with integrated stress control system
✓ use of various conductor connector types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ 3-core versions available with or without armouring
✓ weight of the JS 24-E basic set ~ 1.6 kg
1
sealing tape
2
copper braid tape
3
screening wire connector
4
outer sleeve
5
joint body
6
conductor connector
7
self amalgamating conductive tape
Scope of delivery
3-core straight joint
✓ 1 joint body
✓ 1 conductor connector (optional)
✓ 1 outer sleeve
✓ 1 assembly instructions
✓ accessories
JS 24-3E for armoured and non-armoured 3-core cables
JS 24-E for 6/10 (12) kV (for single-core cable)
JS 24-3E for 6/10 (12) kV (for 3-core cables)
Conductor
cross
section
(mm²)
Size
Reference no.
Stretch range
over
Basic set with conductor connector
insulation
without
(mm)
conductor
AlCuconnector conductor conductor
Conductor
Size/
cross
Stretch
section range over
(mm²)
insulation
(mm)
70
26 393 74
26 393 01
95
26 393 75
26 393 02
95
26 393 76
26 393 03
120
150
26 393 77
26 393 04
150
185
26 393 58
26 393 08
185
26 393 69
26 393 19
240
-
26 393 20
300
26503 62
-
26 503 12
26 503 13
120
240
14
20
15,0 - 24,3
21.3 - 32.6
26 393 90
26 393 91
300
500*
600*
30
* JS 36-E for 12 kV
324 - 42,8
26 503 92
Reference no.
without conductor connector
tape screened
cables with
armouring
tape screened
cables without
armouring
wire screened
cables
14 /
15,0 - 24,3
26 347 85
26 347 88
26 347 81
20 /
21.3 - 32.6
26 347 86
26 347 89
26 347 82
70
Joints
Joint branch for 6/10 (12) kV
1
2
3
4
5
6
8
7
9
JB 24 for 6/10 (12) kV
12 kV
~1100
JB 24 for 6/10 (12) kV
Conductor
cross
section
(mm²)
The JB 24 for 6/10 (12) kV is a branch joint with joint body made
of silicone rubber for plastic insulated cables up to 12 kV.
✓ premoulded joint tube with outer conductive layer
✓ integrated stress control
✓ multi range technology for applications with cross section transition
✓ mechanical (screw type) conductor connector in multi range
technology
✓ weight of the JB 24 incl. conductor connector ~ 6.4 kg
120
150
185
240
Scope of delivery
✓ 1 joint tube
✓ 1 stress cone
✓ 1 twin stress cone
✓ 1 conductor connector
✓ 2 contact shells
✓ 1 outer sleeve
✓ 1 assembly instructions
✓ accessories
Stress cone straight
Size
Stretch range
over insulation
(mm)
53
Stress cone branch
Size/
Stretch range over
insulation (mm)
2 / 18.2 - 25.9
Reference no.
26 320 10
18.4 - 28.5
19 / 19.7 - 28.5
1
cable sheath
2
screening wire connector
3
sealing tape
4
stress cone
5
joint tube
6
conductor connector
7
outer sleeve
8
twin stress cone
9
cable tie
26 320 11
Transition joint for 6/10 (12) kV
1
2
3
4
5
4
6
7
8
9
~1300
JT 12-B
JT 12-B is a transition joint in dry technology with main components made from silicone rubber for transition from PILC to
XLPE insulated cables up to 12 and 24 kV.
✓ joint body with outer screening comprising two components
✓ integrated stress control system
✓ only two sizes for the entire application range from 25 mm² up to
240 mm²
✓ short joint construction
✓ system technology, i. e. same main components for paper insulated belted cable, H-cable, 3-SL-cable and pure XLPE
nnections
Scope of delivery
1
self bonding tape
✓ 3 joint bodies
✓ 3 stress cones
✓ 1 trifurcating cap
✓ 1 outer sleeve
✓ 1 assembly instructions
✓ accessories
2
contact spring
3
trifurcating cap
4
outer sleeve
5
copper braid tape
6
joint body
7
stress cone
8
screening connector
9
cable tie
17
Connector Branch up to 17,5 kV
CB 17,5 - 630
12 kV
CB 17,5-630 is a screened cable connector made of silicone
rubber for cable connection to switchgear (RMU) and transformers up to 17.5 kV with bushings type C (630 A) according to EN
50180, EN 50181. Type tests according to IEC 60502-4:2005-02
and Chinese Standard GB/T 12706.4 have been successfully
passed.
✓ suitable for 12 and 17.5 kV XLPE cables
✓ quick and easy assembly
✓ fits to all switchgears
✓ compact design
✓ maintenance free
✓ fully screened by a bonded outer conductive layer of silicone
✓ integrated stress control system
✓ unique connector casing for 25 up to 500 mm²
✓ 4 sizes of stress cones for multirange cable connection
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ cable sheath testing without dismantling of connector
✓ insulating plug with capacitive measuring point
✓ design with coupling capability/ double cable connection
✓ a lots of accessories available
1
screened connector casing
(with a bonded outer conductive layer)
2
stress cone
3
conductive covering cap
Technical Data:
maximum system voltage
continuous nominal current
partical discharge at 2 U0
AC withstand voltage, 5 min.
DC withstand voltage, 15 min. impulse withstand voltage
diameter over core insulation
cross section (multirange)
Size of
stress cone
5002
5003
5005
5027
17.5 kV
up to 630 A
< 5pC
39 kV / 42 kV
52 kV
95 kV
12.7 - 40.0 mm
25 - 500 mm²
Stretch range
Ø over
core insulation
(mm)
Cross section
Cross section
6 / 10 (12) kV
8.7 / 15 (17.5) kV
12.7 - 19.2
17.0 - 24.3
21.2 - 33.6
28.9 - 40.0
25 - 70
95 - 150
185 - 300
400 - 500
25 - 50
70 - 95
120 - 240
300 - 500
190
110
80
3
1
260
2
Joints
Coupling connector up to 17,5 kV
CC 17,5 - 630
✓ suitable for 12 and 17.5 kV XLPE cables
✓ only ~290 mm installation depth
✓ quick and easy assembly
✓ compact design
✓ maintenance free
✓ fully screened by a bonded outer conductive layer of silicone
✓ integrated stress control system
✓ unique connector casing for 25 up to 500 mm²
✓ 4 sizes of stress cones for multirange cable connection
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ insulating plug with capacitive measuring point
✓ cable sheath testing without dismantling of connector
✓ a lots of accessories available
1
connector type CB
2
conductive covering cap
3
connector type CC
4
stress cone
~110
~290
100
12 kV
CC 17,5-630 is a screened coupling connector made of silicone
rubber for double cable connection. It is linked directly to cable
connector CB 17,5-630. Type tests according to IEC 605024:2005-02 and Chinese Standard GB/T 12706.4 have been successfully passed.
1
2
3
260
4
Technical Data:
maximum system voltage
continuous nominal current
partical discharge at 2 U0
AC withstand voltage, 5 min.
DC withstand voltage, 15 min. impulse withstand voltage
diameter over core insulation
cross section (multirange)
Size of
stress cone
Stretch range
Ø over
core insulation
(mm)
17.5 kV
up to 630 A
< 5pC
39 kV / 42 kV
52 kV
95 kV
12.7 - 40.0 mm
25 - 500 mm²
Cross section
Cross section
6 / 10 (12) kV
8.7 / 15 (17.5) kV
25 - 50
5002
12.7 - 19.2
25 - 70
5003
17.0 - 24.3
95 - 150
70 - 95
5005
21.2 - 33.6
185 - 300
120 - 240
5027
28.9 - 40.0
400 - 500
300 - 500
19
24 kV
Test requirements
12/20 (24) kV and 12,7/22 (24) kV
Test requirements
according to CENELEC HD 629.1 S1 + A1 and VDE 0278-part 629-1
Test
voltage
12/20(24)
12.7/22(24)
1.25 U0
15 kV
16 kV
2 U0
24 kV
25.4 kV
Thermal cycling and AC
15 min and 500 h
2.5 U0
30 kV
32 kV
No breakdown, no flashover.
AC 5 min
4.5 U0
54 kV
57 kV
No breakdown, no flashover.
6 U0
72 kV
76 kV
No breakdown, no flashover.
125 kV
125 kV
No breakdown, no flashover.
Humidity and salt fog
Partial discharge
DC 15 min
Impulse withstand voltage ± 10 x
Specified voltage U0/U (Um) kV
Requirements
No breakdown, no flashover.
Less than 3 ignitions.
No visual damages.
Partial discharge:
max. 10 pC: XLPE
max. 20 pC: PVC
24 kV
Test
notes
21
Indoor termination for 12/20 (24) kV
TI 24
24 kV
TI 24 is an indoor termination made of silicone rubber for connection to air insulated switchgear and transformers up to 24
kV. Type tests according to CENELEC HD 629.1 and VDE 0278
part 629-1 have been successfully passed. For conductor cross
sections from 150 up to 630 mm² the indoor termination type TI
24 CA and/or TI 36 CA applies.
✓ quick and easy assembly
✓ one-piece design with integrated capacitive stress control system
✓ extremely short body
✓ long creepage distance by optimized shed arrangement
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ 2 sizes cover the range of conductor cross sections up to
240 mm²
✓ weight of the TI 24 basic set ~ 0.7 kg
d
1
D
2
L1
25
~40
Scope of delivery
✓ 3 terminations
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 1 assembly instructions
✓ accessories
3
1
cable lug
2
termination
3
earthing cable lug
TI 24
Dimensions
Conduc- Size Stretch
range over d
tor cross
D
L1
insulation (mm) (mm) (mm)
section
(mm)
(mm²)
25
35
50
70
95
120
150
185
240
3
17.0 - 25.0
55
12.5
5
21.2 - 34.6
Basic set
without
cable lug
Reference no.
with cable lug
AlCuconductor conductor
26 302 91
max.
270
60
26 285 92
17
26 302 51
26 302 52
26 302 53
26 302 54
26 285 55
26 285 56
26 285 57
26 285 58
-
26 302 01
26 302 02
26 302 03
26 302 04
26 285 05
26 285 06
26 285 07
26 285 08
26 285 09
Size
Stretch range
over insulation (mm)
150
185
240
Dimensions
d
(mm)
D
(mm)
Reference no.
L1 (mm)
26 457 77 26 457 27
12.5
5
21.2 - 34.6
with cable lug
AlCuconductor conductor
max.
340
60
17
300
26 457 78 26 457 28
26 457 79 26 457 29
26 457 80 26 457 30
TI 36 CA for 12/20 (24) kV
Conductor
cross
section
(mm²)
Size
Stretch range
over insulation (mm)
300
400
500
All terminations can be used on 3-core XPLE cables
with a corresponding trifurcating set
trifurcating set
TI 24 CA
Conductor
cross
section
(mm²)
Additional solutions
Dimensions
d
(mm)
D
(mm)
28.9 - 43.0
17 (Al)
21(Cu)
with cable lug
AlCuconductor conductor
26 447 60 26 447 10
17
27
Reference no.
L1 (mm)
90
max.
485
26 447 61 26 447 11
26 447 62 26 447 12
For conductor cross sections from 300 mm² the TI 36 CA apply.
Illustration see page 36
details see page 30
TI 24 CA
Terminations
Outdoor termination for 12/20 (24) kV
TO 24
✓ quick and easy assembly
✓ one-piece design with integrated capacitive stress control system
✓ extremely short body
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ 2 sizes cover the range of conductor cross sections up to
240 mm²
✓ weight of the TO 24 basic set ~ 1.0 kg
d
1
2
D
L1
24 kV
24 kV
TO 24 is an outdoor termination made of silicone rubber for
overhead link and other outdoor applications up to 24 kV. Type
tests according to CENELEC HD 629.1 and VDE 0278 part 629-1
have been successfully passed. For conductor cross sections
from 150 up to 630 mm² the outdoor termination type TO 24 CA
and/or TO 36 CA applies.
25
Scope of delivery
3
✓ 3 terminations
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 1 assembly instructions
✓ accessories
1
cable lug
2
termination
3
sealing tape
4
earthing cable lug
~40
4
TO 24
Conduc- Size Stretch
Dimensions
tor cross
range over d
D
L1
section
insulation (mm) (mm) (mm)
(mm²)
(mm)
25
35
50
70
95
120
150
185
240
3
17.0 - 25.0
Reference no.
with cable lug
26 303 91
12.5
90
5
Basic set
without
cable lug
max.
340
21.2 - 33.5
26 303 92
17
Alconductor
26 303 51
26 303 52
26 303 53
26 303 54
26 303 55
26 303 56
26 303 57
26 303 58
-
Cuconductor
26 303 01
26 303 02
26 303 03
26 303 04
26 303 05
26 303 06
26 303 07
26 303 08
26 303 09
Additional solutions
Details upon request
FP 20 K with porcelain insulator
and integrated push-on element
made of silicone rubber
TO 24 CA
TO 24 CA
Conductor
cross
section
(mm²)
Size
Stretch range
over insulation (mm)
150
185
240
Dimensions
d
(mm)
D
(mm)
Reference no.
L1 (mm)
12.5
5
21.2 - 34.6
with cable lug
AlCuconductor conductor
26 303 77 26 303 27
max.
400
90
17
300
26 303 78 26 303 28
26 303 79 26 303 29
26 303 80 26 303 30
TO 36 CA for 12/20 (24) kV
Conductor
cross
section
(mm²)
Size
Stretch range
over insulation (mm)
300
400
Dimensions
d
(mm)
D
(mm)
27
28.9 - 43.0
17 (Al)
21(Cu)
with cable lug
AlCuconductor conductor
26 445 60 26 445 10
17
500
Reference no.
L1 (mm)
156
max.
485
26 445 61 26 445 11
26 445 62 26 445 12
Illustration see page 37
23
Elbow connector 250 A for 12/20 (24) kV
CE 24-250
~105
~84
CE24-250 is a screened elbow cable connector made of silicone
rubber for cable connection to switchgear and transformers up
to 24 kV with bushings type A (250 A) according to EN 50180,
EN 50181 and DIN 47636. Type tests according to VDE 0278
have been successfully passed.
✓ quick and easy assembly
✓ integrated capacitive stress control system
✓ screening by outer conductive layer
✓ cable sheath testing without dismantling of connector
✓ metal housing or capacitive measuring point (optional)
✓ only one connector body covers 25-95 mm²
✓ weight of the CE 24-250 ~ 2.2 kg
24 kV
Scope of delivery
✓ 3 cable connectors
✓ 3 conductor cable lugs
✓ 3 contact pins
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
1
bushing
2
contact pin
3
cable lug
4
connector body
5
sealing tape
6
earthing cable lug
2
1
3
~222
4
25
5
~40
CE 24-250 with bail restraint fixing
Conductor
cross
section
(mm²)
25
35
50
70
95
Size
16
Stretch
range over
insulation
(mm)
Reference no. with cable lug
without measuring with measuring point
point
AlConductor
26 364 51
26 364 52
16.9 - 25.0 26 364 53
26 364 54
26 364 55
CuConductor
26 364 01
26 364 02
26 364 03
26 364 04
26 364 05
AlConductor
26 366 51
26 366 52
26 366 53
26 366 54
26 366 55
CuConductor
26 366 01
26 366 02
26 366 03
26 366 04
26 366 05
6
Additional solutions
CE 24-250 with metal flange/housing
Conductor
cross
section
(mm²)
25
35
50
70
95
Size
16
Stretch
range over
insulation
(mm)
Reference no. with cable lug
without measuring
without measuring
point
point
without metal
with metal housing
housing
AlCuAlCuConduc- Conduc- Conduc- Conductor
tor
tor
tor
26 402 51 26 402 01 26 401 51 26 401 01
26 402 52 26 402 02 26 401 52 26 401 02
16.9 - 25.0 26 402 53 26 402 03 26 401 53 26 401 03
26 402 54 26 402 04 26 401 54 26 401 04
26 402 55 26 402 05 26 401 55 26 401 05
EASW with screw type cable lug upon request
CE 24-250 with metal housing
Cable connectors + adapters
Straight connector 250 A for 12/20 (24) kV
EASG 20/250
EASG 20/250 is a screened straight cable connector made of
silicone rubber for cable connection to switchgear and transformers up to 24 kV with bushings type A (250 A) according to EN
50180, EN 50181 and DIN 47636. Type tests according to VDE
0278 part 629-1 have been successfully passed.
✓ quick and easy assembly
✓ integrated capacitive stress control system
✓ screening by outer conductive layer
✓ cable sheath testing without dismantling of connector
✓ only one connector body covers 25-95 mm²
✓ capacitive measuring point (optional)
✓ weight of the EASG 20/250 ~ 2.2 kg
Ø32,5
1
58
2
3
4
1
bushing
✓ 3 cable connectors
✓ 3 contact pins
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
contact pin
3
bail restraint
4
connector body
5
sealing tape
6
earthing cable lug
~290
24 kV
Scope of delivery
25
5
~40
EASG 20/250 with bail restraint fixing
Conductor cross
section
(mm²)
25
35
50
70
95
Size
3
Stretch
range over
insulation
(mm)
Reference no. with cable lug
without measuring with measuring point
point
AlConductor
26 261 51
26 261 52
17.0 - 25.0 26 261 53
26 261 54
26 261 55
CuConductor
26 261 01
26 261 02
26 261 03
26 261 04
26 261 05
AlConductor
26 263 51
26 263 52
26 263 53
26 263 54
26 263 55
CuConductor
26 263 01
26 263 02
26 263 03
26 263 04
26 263 05
Size
Stretch range
over insulation (mm)
Reference no. with cable lug
without measuring
point
with measuring point
AlCuAlCuConductor Conductor Conductor Conductor
25
26 261 61 26 261 11 26 263 61 26 263 11
35
26 261 62 26 261 12 26 263 62 26 263 12
50
Additional solutions
EASG 20/250 with metal flange fixing,
capacitive measuring point (optional)
EASG 20/250 with metal flange
Conductor
cross
section
(mm²)
6
3
17.0 - 25.0
26 261 63 26 261 13 26 263 63 26 263 13
70
26 261 64 26 261 14 26 263 64 26 263 14
95
26 261 65 26 261 15 26 263 65 26 263 15
EASG with screw type cable lug upon request
25
Cable connector 630 A for 12/20 (24) kV
CB 24-630
~190
~110
24 kV
CB 24-630 is a screened cable connector made of silicone
rubber for cable connection to switchgear and transformers up
to 24 kV with bushings type C (630 A) according to EN 50180,
EN 50181 and DIN 47636. Type tests according to CENELEC HD
629.1 and VDE 0278 part 629-1 have been successfully passed.
For conductor cross sections from 400 up to 630 mm² the cable
connector type CB 36-630(1250) applies.
✓ quick and easy assembly
✓ screening by outer conductive layer
✓ integrated stress control system
✓ only 2 versions cover 25 up to 300 mm²
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ cable sheath testing without dismantling of connector
✓ capacitive measuring point
✓ weight of the CB 24-630 basic set ~ 4.4 kg
1
2
Ø~77
3
4
~245 für CB 24-630
~385 für CB 36-630(1250)
5
6
25
~40
7
Scope of delivery
1
insulating plug
✓ 3 cable connectors
✓ 3 stress cones
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
covering cap
3
cable lug
4
connector body
5
stress cone
6
sealing tape
7
earthing cable lug
CB 24-630 (screened)
Conductor
cross
section
(mm²)
25
35
50
70
95
120
150
185
240
300
400*
500*
630*
800
Size of
stress cone
Stretch
range over
insulation
(mm)
Basic set
without
cable lug
type 02
12.7 - 25.0
26 323 92
type 03
21.2 - 34.6
type 31
34.0 - 45.6
26 381 96
type 37
39.1 - 51.0
26 381 97
26 323 93
Reference no.
with cable lug
AlCuconductor conductor
26 323 51 26 323 01
26 323 52 26 323 02
26 323 53 26 323 03
26 323 54 26 323 04
26 323 55 26 323 05
26 323 56 26 323 06
26 323 57 26 323 07
26 323 58 26 323 08
26 323 59 26 323 09
26 323 60 26 323 10
26 381 61 26 381 11
26 381 62 26 381 12
26 381 63 26 381 13
--26 381 14
* CB 36-630(1250) for 24 kV
AB 24-630 (unscreened)
Conductor
cross
section
(mm²)
25
35
50
70
95
120
150
185
240
300
Size of
stress cone
Stretch
range over
insulation
(mm)
type 02
12.7 - 25.0
type 03
21.2 - 34.6
Reference no.
with cable lug
AlCuconductor conductor
26 326 51 26 326 01
26 326 52 26 326 02
26 326 92
26 326 53 26 326 03
26 326 54 26 326 04
26 326 55 26 326 05
26 326 56 26 326 06
26 326 57 26 326 07
26 326 93 26 326 58 26 326 08
26 326 59 26 326 09
26 326 60 26 326 10
Basic set
without
cable lug
Cable adapter for 630 A
AB 24-630 without outer conductive layer
Cable connectors + adapters
Coupling connector 630 A for 12/20 (24) kV
CC 24-630
~110
~290
100
2
Ø~77
✓ only ~290 mm installation depth
✓ quick and easy assembly
✓ screening by outer conductive layer
✓ integrated stress control system
✓ only 2 versions cover 25 up to 300 mm²
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ cable sheath testing without dismantling of connector
✓ capacitive measuring point
✓ weight of the CC 24-630 basic set ~ 4.9 kg
Scope of delivery
1
insulating plug
✓ 3 coupling connectors
✓ 3 stress cones
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
covering cap
3
cable lug
4
connector body
5
stress cone
6
sealing tape
7
earthing cable lug
1
3
4 ~245
5
25
~40
24 kV
CC 24-630 is a screened coupling connector made of silicone
rubber for double cable connection. It is linked directly to cable
connector CB 24-630. For conductor cross sections from 400
up to 630 mm² the coupling connector type CC 36-630(1250)
applies.
6
7
CC 24-630 (screened) for connection with CB 24-630
Conductor
cross
section
(mm²)
Size of
stress cone
Stretch
range over
insulation
(mm)
Basic set
without
cable lug
12.7 - 25.0
26 353 92
Reference no.
with cable lug
Alconductor
Cuconductor
26 353 51
26 353 01
26 353 52
26 353 02
26 353 53
26 353 03
70
26 353 54
26 353 04
95
26 353 55
26 353 05
120
26 353 56
26 353 06
150
26 353 57
26 353 07
26 353 58
26 353 08
240
26 353 59
26 353 09
300
26 353 60
26 353 10
400*
26 384 61
26 384 11
26 384 62
26 384 12
26 384 63
26 384 13
25
35
50
185
500*
type 02
type 03
type 31
21.2 - 34.6
34.0 - 45.6
26 353 93
26 384 96
630*
Coupling connection
AB 24-630 with AC 24-630,
both without outer conductive layer
* CC 36-630(1250) for 24 kV for coupling with CB 36-630(1250)
AC 24-630 (unscreened) for connection with AB 24-630
Conductor
cross
section
(mm²)
Size of
stress cone
Stretch range
over
insulation
(mm)
Reference no.
Basic set
without
cable lug
with cable lug
Alconductor
Cuconductor
25
26 356 51
26 356 01
35
26 356 52
26 356 02
50
type 02
12.7 - 25.0
26 356 92
26 356 53
26 356 03
70
26 356 54
26 356 04
26 356 05
95
26 356 55
120
26 356 56
26 356 06
150
26 356 57
26 356 07
185
type 03
21.2 - 34.6
26 356 58
26 356 08
240
26 356 93
26 356 59
26 356 09
300
26 356 60
26 356 10
27
Elbow connector 400 A for 12/20 (24) kV
CE 24-400
~210
CE 24-400 is a screened cable connector made of silicone rubber
for cable connection to switchgear and transformers up to 24 kV
with bushings type B (400 A) according to EN 50180, EN 50181
and DIN 47636. Type tests according to CENELEC HD 629.1
and VDE 0278 part 629-1 have been successfully passed.
24 kV
✓ quick and easy assembly
✓ screening by outer conductive layer
✓ integrated stress control system
✓ only 2 versions cover 25 up to 300 mm²
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ capacitive measuring point
✓ weight of the CE 24-400 basic set ~ 3.5 kg
Scope of delivery
✓ 3 cable connectors
✓ 3 stress cones
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
1
contact pin
2
cable lug
3
connector body
4
stress cone
5
sealing tape
6
earthing cable lug
CE 24-400 capacitive measuring point
Conductor
Size of
Stretch
cross
stress cone range over
section
insulation
(mm²)
(mm)
25
35
50
70
95
120
150
185
240
300
type 02
type 03
Reference no.
with cable lug
AlCuconductor
conductor
26 416 51
26 416 01
26 416 52
26 416 02
12.7 - 25.0 26 416 92
26 416 53
26 416 03
26 416 54
26 416 04
26 416 55
26 416 05
26 416 56
26 416 06
26 416 57
26 416 07
21.2 - 34.6
26 416 93 26 416 58
26 416 08
26 416 59
26 416 09
26 416 60
26 416 10
Conductor
Size of
Stretch range
Reference no.
cross
stress cone
over
Basic set without
insulation
cable lug
(mm)
25
35
50
5003
17.0 - 24.3
26 456 91
5005
21.2 - 33.5
26 456 92
5027
28.9 - 40.0
26 456 93
70
95
120
150
185
240
300
See also on page 40
130
1
2
3
4
5
6
Basic set
without
cable lug
CB 36-400 for 12/20 (24) kV
section (mm²)
~190
Additional solutions
CB 36-400
~245
Cable connectors + adapters
Surge arrester for 12/20 (24) kV
CSA 24
CSA 24 is a metal oxide surge arrester with silicone rubber
connector housing. It protects medium voltage networks, e. g.
transformers, switchgears and cables. Incoming overvoltage
waves and voltage increase by reflection are limited. Minimum
total length is achieved by direct link of the surge arrester to cable connector CB 24-630 or to coupling connector CC 24-630.
~110
~290
~100
2
1
3
Ø~77
✓ extremely short installation depth
✓ quick and easy assembly
✓ integrated stress control system
✓ capacitive measuring point
✓ weight of the CSA 24-5 ~ 9.8 kg
✓ 3 surge arresters
✓ 3 threaded bolts
✓ 3 earthing strands (preassembled)
✓ 1 assembly instruction
✓ accessories
continuous operating voltage Uc
1
threaded bolt
2
insulating plug
3
covering cap
4
surge arrester
5
earthing cable lug
CSA 24-5
CSA 24-10
ASA 24-5
ASA 24-10
24 kV
24 kV
rated voltage Ur
30 kV
30 kV
nominal discharge current In
5 kA
10 kA
partial discharge at 24 kV
< 5 pC
< 5 pC
L
24 kV
Scope of delivery
4
5
residual voltage at:
- steep current impulse 5/10 kA, 1/20 µs
88.6 kV
85.6 kV
- long duration current impulse 100 A, 30/60 µs
63.7 kV
60.2 kV
- lightning current impulse 5/10 kA, 8/20 µs
80.0 kV
80.0 kV
dimension L
390 mm
320 mm
Surge arrester
ASA 24 is the unscreened alternative for
direct link to cable adapter AB 24-630 or
to coupling adapter AC 24-630.
CSA 24 (screened)
Type
Reference no.
CSA 24-5
26 357 08
CSA 24-10
26 357 58
ASA 24 (unscreened)
Type
Reference no.
ASA 24-5
26 359 08
ASA 24-10
26 359 58
Further alternatives concerning continuos operating voltage
Uc and nominal discharge current In upon request.
29
Trifurcating set for 12/20 (24) kV
ATS
ATS facilitates a single core breakout of a 3-core cable and seals
the cable end. Insulating tubes protect the cores and semiconductive stops provide a perfect match with terminations and
cable connectors.
Scope of delivery
1
outer sleeve (3 x 1 m)
✓ 3 outer sleeves
✓ 1 trifurcating cap
✓ 1 assembly instructions
✓ accessories
2
trifurcating cap
3
copper wire
4
sealing tape
5
earthing strand
24 kV
ATS for tape screened cables
Conductor cross section
Reference no.
1
(mm²)
25
21 231 12
35 - 95
21 231 13
120 - 300
21 231 14
2
3
ATS for wire screened cables
Conductor cross section
Reference no.
(mm²)
25
21 229 01
35 - 95
21 229 02
120 - 300
21 229 03
ATS for special cable or contact spring versions upon request.
4
5
Joints
Straight joint for 12/20 (24) kV
1
2
3
4
5
6
7
~925
JS 24-E is a straight joint with joint body made of silicone rubber for plastic insulated cables up to 24 kV. Type tests according
to CENELEC HD 629.1 and VDE 0278 part 629-1 have been
successfully passed.
✓ quick and easy assembly
✓ premoulded joint body with integrated stress control system
✓ use of various conductor connector types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ 3-core versions available with or without armouring
✓ weight of the JS 24-E basic set ~ 1.6 kg
Scope of delivery
✓ 1 joint body
✓ 1 conductor connector (optional)
✓ 1 outer sleeve
✓ 1 assembly instructions
✓ accessories
1
sealing tape
2
copper braid tape
3
screening wire connector
4
outer sleeve
5
joint body
6
conductor connector
7
self amalgamating conductive tape
JS 24-E (for single-core cable)
Conductor
cross
section
(mm²)
JS 24-3E for armoured and non-armoured 3-core cables
Size
Stretch range
Reference no.
over
Basic set with conductor connector
insulation
without
(mm)
conductor
AlCuconnector conductor conductor
25
26 393 51
26 393 01
35
26 393 52
26 393 02
26 393 53
26 393 03
50
14
15,0 - 24,3
26 393 90
70
26 393 54
26 393 04
95
26 393 55
26 393 05
120
150
20
21.3 - 32.6
26 393 91
26 393 56
26 393 06
26 393 57
26 393 07
185
26 393 58
26 393 08
240
26 393 59
26 393 09
300
3-core straight joint
24 kV
JS 24-E
400*
500*
27
30
28.9 - 37.8
32,4 - 42,8
26 393 92
26 393 60
26 393 10
26 503 92
26 503 61
26 503 61
26 503 11
26 503 12
* JS 36 E for 24 kV
JS 24-3E (for 3-core cables)
AM 20
Conductor
Size/
cross
Stretch
section range over
(mm²)
insulation
(mm)
Reference no.
without conductor connector
tape screened
cables with
armouring
tape screened
cables without
armouring
wire screened
cables
14 /
15,0 - 24,3
26 347 85
26 347 88
26 347 81
20 /
21.3 - 32.6
26 347 86
26 347 89
26 347 82
27/
28.9 - 37.8
26 347 87
26 347 90
26 347 83
25
35
50
70
95
120
150
185
240
300
400*
* with nkt cables special conductor connector only.
31
Straight joint for 12/20 (24) kV
1
2
3
4
5
6
~760
24 kV
JS 24-C
JS 24-C is a straight joint with joint body made of silicone rubber
for plastic-insulated cables up to 24 kV. Type tests according
to CENELEC HD 629.1 and VDE 0278 part 629-1 have been
successfully passed.
✓ quick and easy assembly
✓ parking position over outer sheath without pre-expansion
of the joint body
✓ short design
✓ integrated stress control system
✓ outer protection tube, heat shrink or cold applicable
✓ use of various conductor connector types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ same basic components also for transition technique
to PILC
✓ weight of the JS 24-C basic set ~ 1.6 kg
1
sealing tape
2
copper braid tape
3
joint body
4
outer sleeve
5
conductor connector
6
screening wire connector
Scope of delivery
✓ 1 joint body
✓ 1 stress cone
✓ 1 conductor connector (optional)
✓ 1 outer sleeve
✓ 1 assembly instructions
✓ accessories
JS 24-C
Conductor
cross
section
(mm²)
25
35
50
70
95
120
150
185
240
Additional solutions
End joint JF 24
Reference no. 26415 65 (95-240 mm²)
Size
Stretch
range over
insulation
(mm)
2
17.0 - 25.0
3
21.2 - 32.6
Reference no.
with conductor connector
AlCuconductor conductor
26 350 51 26 350 01
26 350 52 26 350 02
26 350 82
26 350 53 26 350 03
26 350 54 26 350 04
26 350 55 26 350 05
26 350 56 26 350 06
26 350 57 26 350 07
26 350 83
26 350 58 26 350 08
26 350 59 26 350 09
Basic set
without
conductor
connector
AM 20 R
~500
AM 20 R
Conductor
cross section
(mm²)
Weight of the AM 20 R ~ 2,6 kg
Stretch range
over
insulation (mm)
Reference no.
with conductor connector
Al-
Cu-
conductor
conductor
25
31 270 31
31 270 71
35
31 270 32
31 270 72
31 270 33
31 270 73
70
31 270 34
31 270 74
95
31 270 35
31 270 75
120
31 270 36
31 270 76
31 270 37
31 270 77
185
31 270 38
31 270 78
240
31 270 39
31 270 79
50
AM 20 R is a repair joint with joint body made of silicone rubber
for plastic-insulated cables up to 24 kV. It is used for repair after
cable fault and bridges a failure area of 160 mm. On request for the
AM 20 R screw type conductor connectors are available.
Size of
stress cone
150
5003
5005
17.0 - 24.3
21.2 - 33.5
Joints
Branch joint for 12/20 (24) kV
1
2
3
4
5
6
7
8
9
~1100
JB 24
1
cable sheath
The JB 24 is a branch joint with joint body made of silicone rubber
for plastic insulated cables up to 24 kV.
2
screening wire connector
3
sealing tape
JB 24
Conductor
cross
section
(mm²)
Stress cone straight
Size
Stretch range over
insulation (mm)
95
56
22 /
32.3 - 32.6
240
joint tube
6
conductor connector
7
outer sleeve
8
twin stress cone
9
cable tie
✓ 1 joint tube
✓ 1 stress cone
✓ 1 twin stress cone
✓ 1 conductor connector
✓ 2 contact shells
✓ 1 outer sleeve
✓ 1 assembly instructions
✓ accessories
26 320 12
21.2 - 32.6
185
stress cone
5
Scope of delivery
Reference no.
Size/
Stretch range over
insulation (mm)
19 /
19.7 - 28.5
120
150
Stress cone branch
4
24 kV
✓ premoulded joint tube with outer conductive layer
✓ integrated stress control tube
✓ multi range technology for applications with cross section
transition
✓ mechanical (screw type) conductor connector in multi range
technology
✓ weight of the JB 24 incl. conductor connector ~ 6.4 kg
26 320 13
Transition joint for 12/20 (24) kV
1
2
3
4
JT 24
JT 24 is a transition joint in dry technology with main components made from silicone rubber for transition from PILC to XLPE
insulated cables up to 24 kV.
✓ joint body with outer screening comprising two components
✓ integrated stress control system
✓ only two sizes for the entire application range from 25 mm²
up to 240 mm²
✓ short joint construction
✓ system technology, i. e. same main components for paper
insulated belted cable, H-cable, 3-SL-cable and pure XLPE
connections
5
6
7
8
9
10
~1300
Scope of delivery
1
trifurcating cap
✓ 3 joint bodies
✓ 3 stress cones
✓ 1 trifurcating cap
✓ 1 outer sleeve
✓ 1 assembly instructions
✓ accessories
2
outer sleeve
3
self bonding tape, conductive
4
contact spring
5
copper gauze sleeve
6
joint body
7
conductor connector
8
stress cone
9
screening connector
10
cable tie
33
36 kV
Test requirements
18/30 (36) kV and 20,8/36 (42) kV
Test requirements
according to CENELEC HD 629.1 S1 + A1 and VDE 0278-part 629-1
Test
voltage
18/30(36)
20.8/36 (42)
1.25 U0
22,5 kV
26 kV
No breakdown, no flashover.
Less than 3 ignitions.
No visual damages.
2 U0
36 kV
42 kV
Partial discharge:
max. 10 pC: XLPE
max. 20 pC: PVC
Thermal cycling and AC
15 min and 500 h
2.5 U0
45 kV
52 kV
No breakdown, no flashover.
AC 5 min
4.5 U0
81 kV
94 kV
No breakdown, no flashover.
6 U0
108 kV
125 kV
No breakdown, no flashover.
170 kV
200 kV
No breakdown, no flashover.
Humidity and salt fog
Partial discharge
DC 15 min
Impulse withstand voltage ± 10 x
Specified voltage U0/U (Um) kV
Requirements
36 kV
Test
notes
35
Indoor termination for 18/30 (36) kV
TI 36
d
TI 36 is an indoor termination made of silicone rubber for connection to air insulated switchgear and transformers up to 36
kV. Type tests according to CENELEC HD 629.1 and VDE 0278
part 629-1 have been successfully passed. For conductor cross
sections from 300 up to 400 mm² the indoor termination type TI
36 CA applies.
1
2
✓ quick and easy assembly
✓ one-piece design with integrated capacitive stress control
system
✓ short body
✓ long creepage distance by optimized shed arrangement
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ 2 sizes cover the range of conductor cross sections up to 240 mm²
✓ weight of the TI 36 basic set ~ 1.1 kg
D
L1
25
~40
36 kV
Scope of delivery
✓ 3 terminations
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 1 assembly instructions
✓ accessories
3
1
cable lug
2
termination
3
earthing cable lug
TI 36
Conductor cross
section
(mm²)
95
120
150
185
240
Stretch
Dimensions
Reference no.
range over d
D
L1 Basic set
with cable lug
insulation (mm) (mm) (mm) without
AlCu(mm)
cable lug conductor conductor
5
21.2 - 34.6
27 28.9 - 43.0
12.5
17
26 392 55
max.
26 392 92
330
26 392 56
90
26 392 67
max.
26 392 93 26 392 68
375
26 392 69
26 392 05
26 392 06
26 392 17
26 392 18
26 392 19
Additional solutions
TI 36 CA
d
50-70 mm² upon request
TI 36 CA
Conductor cross
section
(mm²)
Size
Stretch
range over
insulation
(mm)
D
(mm)
Reference no.
L1
(mm)
with cable lug
AlCuconductor conductor
26 447 59 26 447 09
240
300
400
Dimensions
d
(mm)
17
27
28.9 - 43.0
500*
* (= AV 30 E + covering cap)
26 447 60 26 447 10
90
17 (Al)
21(Cu)
max.
485
26 447 61 26 447 11
31 808 12
31 808 62
+31 341
+31 341 11
11
D
L1
Terminations
Outdoor termination for 18/30 (36) kV
TO 36
d
TO 36 is an outdoor termination made of silicone rubber for
overhead link and other outdoor applications up to 42 kV. Type
tests according to CENELEC HD 629.1 and VDE 0278 part
629-1 have been successfully passed. For conductor cross sections from 300 up to 500 mm² the outdoor termination type TO
36 CA applies.
1
2
✓ quick and easy assembly
✓ one-piece design with integrated capacitive stress control
system
✓ short body
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ 2 sizes cover the range of conductor cross sections up to 240 mm²
✓ weight of the TO 36 basic set ~ 2.9 kg
L1
D
3
Scope of delivery
1
cable lug
2
termination
3
sealing tape
4
earthing cable lug
4
36 kV
✓ 3 terminations
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 1 assembly instructions
✓ accessories
~40
TO 36
Conduc- Size Stretch
range over
tor cross
insulation
section
(mm)
(mm²)
50
70
95
120
150
185
240
20
21.2 34.6
Dimensions
d
D
L1
Reference no.
with cable lug
Basic set
without
AlCucable lug conductor conductor
26 446
92
12,5
156
27
28.9 43.0
26 446
93
17
26 446 53
26 446 54
26 446 55
26 446 56
26 446 57
26 446 58
26 446 59
26 446 03
26 446 04
26 446 05
26 446 06
26 446 07
26 446 08
26 446 09
Additional solutions
TO 36 CA
d
TO 36 CA
Conductor
cross
section
(mm²)
Size
Stretch range
over insulation (mm)
d
(mm)
Dimensions
28.9 - 43.0
17
D
(mm)
Reference no.
L1 (mm)
26 445 59 26 445 09
240
300
27
156
400
500*
with cable lug
13
41.4 - 48.2
17 (Al)
21(Cu)
L1
AlCuconductor conductor
max.
485
26 445 60 26 445 10
D
26 445 61 26 445 11
31 669 62 31 669 12
*(AVF 30 SEA Size 13)
37
Cable connector 630 A for 18/30 (36) kV
CB 36-630
~190
CB 36-630 is a screened cable connector made of silicone
rubber for cable connection to switchgear and transformers up
to 42 kV with bushings type C (630 A) according to EN 50180,
EN 50181 and DIN 47636. Type tests according to CENELEC
HD 629.1 and VDE 0278 part 629-1 have been successfully
passed.
36 kV
✓ quick and easy assembly
✓ screening by outer conductive layer
✓ integrated stress control system
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ cable sheath testing without dismantling of connector
✓ capacitive measuring point
✓ weight of the CB 36-630 basic set ~ 5.3 kg
Scope of delivery
1
insulating plug
✓ 3 cable connectors
✓ 3 stress cones
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
covering cap
3
cable lug
4
connector body
5
stress cone
6
sealing tape
7
earthing cable lug
CB 36-630
Conductor
cross
section
(mm²)
25
35
50
70
95
120
150
185
240
300
400
500
630
2
Ø~79
3
max. Ø84
(300 mm²)
~245
4
5
25
6
~40
7
Additional solutions
Size of
stress cone
Stretch
range over
insulation
(mm)
Reference no.
Basic set
with cable lug
without
AlCucable lug conductor conductor
type 5003
17.0 - 24.3
26 331 91
type 5005
21.2 - 33.5
26 331 92
type 5027
28.9 - 40.0
26 331 93
26 331 51
26 331 52
26 331 53
26 331 54
26 331 55
26 331 56
26 331 57
26 331 58
26 331 59
26 331 60
26 331 01
26 331 02
26 331 03
26 331 04
26 331 05
26 331 06
26 331 07
26 331 08
26 331 09
26 331 10
CB 36-630 (1250)
Conductor
cross
section
(mm²)
1
110
Size of
stress cone
Stretch
range over
insulation
(mm)
Basic set
without
cable lug
31
34.0 - 45.6
26 381 96
37
39.0 - 51.0
26 381 97
Reference no.
with cable lug
Alconductor
26 381 61
26 381 62
26 382 63
Cuconductor
26 381 11
26 381 12
26 382 13
CB 36-630 (1250)
~190
~110
Ø~77
~385
Ø~93
(630 mm²)
Cable connectors + adapters
Coupling connector 630 A for 18/30 (36) kV
CC 36-630
~300
110
110
1
insulating plug
✓ 3 cable connectors
✓ 3 stress cones
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
covering cap
3
cable lug
4
connector body
5
stress cone
6
sealing tape
7
earthing cable lug
25
35
50
70
95
120
150
185
240
300
Size of
stress cone
Stretch
range over
insulation
(mm)
Reference no.
Basic set
with cable lug
without
AlCucable lug conductor conductor
type 5003
17.0 - 24.3
26 332 91
type 5005
21.2 - 33.5
26 332 92
type 5027
28.9 - 40.0
26 332 93
26 332 51
26 332 52
26 332 53
26 332 54
26 332 55
26 332 56
26 332 57
26 332 58
26 332 59
26 332 60
3
max.
Ø84
~245
4
5
6
7
Additional solutions
CC 36-630 for connection with CB 36-630
Conductor
cross
section
(mm²)
2
Ø~79
✓ only ~300 mm installation depth
✓ quick and easy assembly
✓ screening by outer conductive layer
✓ integrated stress control system
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ cable sheath testing without dismantling of connector
✓ capacitive measuring point
✓ weight of the CC 24-630 basic set ~ 6.0 kg
Scope of delivery
1
36 kV
CC 36-630 is a screened coupling connector made of silicone
rubber for double cable connection. It is linked directly to cable
connector CB 36-630.
26 332 01
26 332 02
26 332 03
26 332 04
26 332 05
26 332 06
26 332 07
26 332 08
26 332 09
26 332 10
CC 36-630 (1250)
~110
~300
~110
Ø~77
~385
max.
Ø~93
CC 36-630 (1250) for connection with CB 36-630(1250)
Conductor
cross
section
(mm²)
400
500
630
Size of
stress cone
Stretch
range over
insulation
(mm)
Basic set
without
cable lug
31
34.0 - 45.6
26 384 96
37
39.0 - 51.0
26 384 97
Reference no.
with cable lug
Alconductor
26 384 61
26 384 62
26 385 63
Cuconductor
26 384 11
26 384 12
26 385 13
CC 36-630 for connection with CB 36-630(1250) upon request.
39
Elbow connector 400 A for 18/30 (36) kV
CB 36-400
~190
CB 36-400 is a screened cable connector made of silicone
rubber for cable connection to switchgear and transformers up
to 42 kV with bushings type B (400 A) according to EN 50180,
EN 50181 and DIN 47636. Type tests according to CENELEC
HD 629.1 and VDE 0278 part 629-1 have been successfully
passed.
36 kV
✓ quick and easy assembly
✓ screening by outer conductive layer
✓ integrated stress control system
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ capacitive measuring point
✓ weight of the CB 36-400 basic set ~ 5.5 kg
1
insulating plug
✓ 3 cable connectors
✓ 3 stress cones
✓ 3 conductor cable lugs (optional)
✓ 3 earthing cable lugs
✓ 3 earthing strands (preassembled)
✓ 1 assembly instructions
✓ accessories
2
covering cap
3
cable lug
4
connector body
5
stress cone
6
sealing tape
7
earthing cable lug
CB 36-400
Reference no.
Conductor
Size of
Stretch range
cross
stress cone
over
Basic set wi-
section
insulation
thout cable lug
(mm²)
(mm)
35
5003
17.0 - 24.3
26 456 91
5005
21.2 - 33.5
26 456 92
5027
28.9 - 40.0
26 456 93
50
70
95
120
150
185
240
300
Cable lugs see on page 46
1
2
Ø~79
3
4
max. Ø84
5
Scope of delivery
25
~110
6
7
~245
Cable connectors + adapters
Surge arrester for 18/30 (36) kV
CSA 36
CSA 36 is a metal oxide surge arrester with silicone rubber
connector housing. It protects medium voltage networks, e. g.
transformers, switchgears and cables. Incoming overvoltage
waves and voltage increase by reflection are limited. Minimum
total length is achieved by direct link of the surge arrester to cable connector CB 36-630 or to coupling connector CC 36-630.
~110
~300
~110
2
1
3
Ø~79
✓ extremely short installation depth
✓ quick and easy assembly
✓ integrated stress control system
✓ capacitive measuring point
Scope of delivery
✓ 3 surge arresters
✓ 3 threaded bolts
✓ 3 earthing strands (preassembled)
✓ 1 assembly instruction
✓ accessories
1
threaded bolt
2
insulating plug
3
covering cap
4
surge arrester
5
earthing cable lug
~450
4
continuous operating voltage Uc
36 kV
rated voltage Ur
45 kV
nominal discharge current In
10 kA
partial discharge at 1.05 x Uc
< 5 pC
residual voltage at:
100 kA
36 kV
CSA 36-10
- steep current impulse 10 kA, 1/2 µs
- long duration current impulse 125 A, 30/60 µs
128 kV
- lightning current impulse 10 kA, 8/20 µs
85,2 kV
dimension L
120 kV
Type
Reference no.
CSA 36-10
26 569 54
5
Further alternatives concerning continuos operating voltage
Uc and nominal discharge current In upon request.
41
Trifurcating set for 18/30 (36) kV
ATS
ATS facilitates a single core breakout of a 3-core cable and seals
the cable end. Insulating tubes protect the cores and semi-conductive stops provide a perfect match with terminations and
cable connectors.
Scope of delivery
1
outer sleeve (3 x 1 m)
✓ 3 outer sleeves
✓ 1 trifurcating cap
✓ 1 assembly instructions
✓ accessories
2
trifurcating cap
3
copper wire
4
sealing tape
5
earthing strand
ATS for tape screened cables
Conductor cross section
Reference no.
(mm²)
25 - 35
21 231 13
50 - 300
21 231 14
1
2
3
ATS for wire screened cables
36 kV
Conductor cross section
Reference no.
(mm²)
25 - 35
21 229 02
50 - 300
21 229 03
ATS for special cable or contact spring versions upon request.
4
5
Joints
Straight joint for 18/30 (36) kV
1
2
3
4
5
6
7
4
8
Dimensions in brakets matching
for the sizes 60...63
135 (284)
~760 (1100)
AM 30 is a straight joint with a joint body made of silicone rubber for plastic-insulated cables up to 36 kV. It is used for large
conductor cross sections up to 630 mm².
✓ quick and easy assembly
✓ short design
✓ integrated stress control system
✓ use of various cable lug types:
· mechanical (screw type)
· hexagonal pressing
· deep indent pressing
✓ weight of the AM 30 ~ 2.8 kg
1
cable sheath
2
outer sleeve
3
screening wires
4
stress cone
5
joint body
6
contact shell
7
conductor connector
8
screening wire connector
Scope of delivery
AM 30
✓ 1 joint body
✓ 2 stress cones
✓ 2 contact shells
✓ 1 conductor connector (optional)
✓ 1 outer sleeve
✓ 1 assembly instructions
✓ accessories
Conductor
cross section
(mm²)
Size of
stress cone
Stretch range
over
insulation
(mm)
36 kV
AM 30
Reference no.
with conductor connector
Al-
Cu-
conductor
conductor
50
31 454 63
31 454 83
70
31 454 64
31 454 84
31 454 65
31 454 85
120
31 454 66
31 454 86
150
31 454 67
31 454 87
95
5005
21.2 - 33.6
185
60
30.9 - 37.8
31 021 38
31 021 88
240
61
33.9 - 39.6
31 021 39
31 021 89
300
400
500
62
35.9 - 42.8
63
41.4 - 48.2
31 021 40
31 021 90
31 021 41
31 021 91
31 021 42
31 021 92
630 mm² on request
43
inner cone
Notes
inner cone
notes
45
Connector Plug In up to 42 kV
CPI 2
CPI 2 is a screened inner cone cable connector made of silicone rubber for cable connection to switchgear (RMU) and
transformers up to 42 kV with bushings size 2 according to
EN 50180/50181.
✓ unique connector casing for 25 up to 300 mm²
✓ assembling without specially tools
✓ quick and easy assembly
✓ compact design
✓ maintenance free
✓ connector made from special designed silicone-rubber
· very high elasticity
· weather and ageing resistance
· non-flammable, halogen free
✓ fully screened by a bonded outer conductive layer of silicone
✓ integrated stress control system
✓ max. 4 sizes of stress cones for multirange cable connection
✓ multirange screw cable lug with contact lamella
✓ cable sheath testing without dismantling of connector
1
Bushing
2
Connector casing
3
Stress cone
1
2
3
inner cone
Technical Data:
Maximum system voltage
Continuous nominal current
Partical discharge at 2 U0
AC withstand voltage, 5 min.
DC withstand voltage, 15 min. Impulse withstand voltage
Diameter over core insulation
Cross section
Thermal short circuit
Dynamic short circuit
42 kV
800 A
< 5pC
117 kV
125 kV
200 kV
12.7 - 40,0/44.0* mm
25 - 300 mm²
1 sec. 33 kA, 185 mm² Cu
3 sec. 40 kA, 300 mm² Cu
100 kA, 300 mm² Cu
*3-core cables only
Size of
Stretch range
stress cone
Ø over
core insulation
Cross section
Cross section
Cross section
Cross section
6 / 10 (12) kV
8.7/15 (17.5) kV
12 / 20 (24) kV
18 / 30 (36) kV
(mm)
5002
12.7 - 19.2
25 - 70
25 - 50
-
-
5003
17.0 - 24.3
95 - 150
70 - 95
25 - 70
25 - 35
5005
21.2 - 33.6
185 - 300
120 - 240
95 - 240
50 - 120
5027
28.9 - 40,0/44.0*
-
300
300
150 - 300
*3-core cables only
~190
Inner cone plug
Connector Plug In up to 42 kV
CPI 3
CPI 3 is a screened inner cone cable connector made of silicone rubber for cable connection to switchgear (RMU) and
transformers up to 42 kV with bushings size 3 according to
EN 50180/50181.
✓ unique connector casing for 50 up to 630 mm²
✓ assembling without specially tools
✓ quick and easy assembly
✓ compact design
✓ maintenance free
✓ connector made from special designed silicone-rubber
· very high elasticity
· weather and ageing resistance
· non-flammable, halogen free
✓ fully screened by a bonded outer conductive layer of silicone
✓ integrated stress control system
✓ 4 sizes of stress cones for multirange cable connection
✓ multirange screw cable lug with contact lamella
✓ cable sheath testing without dismantling of connector
1
2
~195
1
Bushing
2
Connector casing
3
Stress cone
3
Technical Data:
Size of
Stretch range
stress cone
Ø over
core insulation
42 kV
up to 1250 A
< 5 pC
117 kV
125 kV
200 kV
21.2 - 51.0 mm
50 - 630 mm²
inner cone
Maximum system voltage
Continuous nominal current
Partical discharge at 2 U0
AC withstand voltage, 5 min.
DC withstand voltage, 15 min. Impulse withstand voltage
Diameter over core insulation
Cross section
Cross section
Cross section
Cross section
Cross section
6 / 10 (12) kV
8.7/15 (17.5) kV
12 / 20 (24) kV
18 / 30 (36) kV
(mm)
20
21.2 - 33.6
185 - 400
120 - 300
95 - 240
50 - 150
27
28.9 - 36,4/37.8*
400 - 500
300 - 500
300 - 400
150 - 240
31
34.0 - 45.6
630
500 - 630
500 - 630
300 - 500
37
39.1 - 51.0
-
-
-
630
*3-core cables only
47
Surge arrester SPI
SPI is a screened metal oxide surge arrester with silicone rubber connector for connection to plug in type bushings acc.
EN 50180/50181. Surge arrester protecting medium voltage
networks, e. g. transformers, switchgears and cables. Incoming
overvoltage waves and voltage increase by reflection are limited.
For surge arrester type tests according to IEC 60099-4 are valid.
1
✓ compact design
✓ quick and easy assembly
✓ assembly without special tools
✓ fully screened by a bonded outer conductive layer of silicone
✓ connector made from special designed silicone-rubber
· very high elasticity
· weather and ageing resistance
· non-flammable, halogen free
1
Bushing
2
Connector casing
3
Surge arrester
2
Arrester housing
Uc= 24 kV
Ur= 30 kV
Uc= 42 kV
Ur= 52.5 kV
Impulse voltage 1,2/50µs
125 kV
200 kV
Power frequence voltage
60 kV
95 kV
Dimension L
340 mm
460 mm
inner cone
Technical Data:
SPI 2 24-5
SPI 3 42-10
continuous operating voltage Uc
24 kV
42 kV
rated voltage Ur
30 kV
52,5 kV
nominal discharge current In
5 kA
10 kA
partial discharge at 1.05xUc
< 5 pC
< 5 pC
- long duration current impulse 125 A, 30/60 μs
60,6 kV
99,4 kV
- lightning current impulse 5/10 kA, 8/20 μs
79,7 kV
140 kV
long duration current impulse
150 A
325 A
High current impulse
65 kA
100 kA
residual voltage at:
L
3
Surge arrester + Final plug
Final plug up to 52 kV
FPI
FPI is a ist Final Plug for bushings according to EN 50180/50181.
✓ Final Plug complete with metal ring
✓ assembly without special tools
✓ Integrated stress control system
✓ quick and easy assembly
1
2
Technical Data FPI 2
Size 2
42 kV
117 kV
125 kV
200 kV
Size 3
52 kV
124 kV
-------250 kV
inner cone
Bushing Maximum system voltage FPI 2
AC withstand voltage, 5 min.
DC withstand voltage, 15 min. Impulse withstand voltage
49
auxiliary
Auxiliary information
auxiliary information
✓ Accessories for cable connector and adapter
✓ Assembling material
✓ Cable lugs and conductor connector
✓ Tools
✓ Pre-assembled connection cables
✓ Connection variants
auxiliary
notes
51
Test adapter
for CB+CC 12+24+36-630
and AB+AC 12+24-630
Type PAK 630 M12 (L = 310 mm)
Reference no. 31 050 12
(1 set = 3 pieces)
for CB+CC 36-630(1250)
Type PAK 630 M16 (L = 460 mm)
Reference no. 31 050 39
(1 set = 3 pieces)
Coupling piece
for CB and AB
CP 630-C for CB 24+36-630
Reference no. 31 700 70 (M12)
(1 set = 3 pieces)
CP 630-A for AB 24-630
Reference no. 31 700 90 (M12)
(1 set = 3 pieces)
auxiliary
CP 630-M16 for CB 36-630(1250)
Reference no. 31 700 50 (M16)
(1 set = 3 pieces)
End plug
for CB und AB
EAS 630
Reference no. 31 700 42
(1 set = 3 pieces)
End cover for
bushings type C up to 42 kV
CBC 40,5-630
Reference no.: 31 800 08
(1 set = 3 pieces)
Earthing adapter
for CB+CC 12+24+36-630
and AB+AC 12+24-630
E 20
Ball Ø20 reference no: 31 050 13
Ball Ø25 reference no: 31 050 10
(1 set = 3 pieces)
Earthing adapter
for EASW 10/250
E 250
Ball Ø20 reference no: 31 050 44
Ball Ø25 reference no: 31 050 45
(1 set = 3 pieces)
for CE 20-250
Ball Ø20 reference no: 31 050 55
Ball Ø25 reference no: 31 050 56
(1 set = 3 pieces)
Further accessories
upon request
only for AC, DC and VLF-Test
Accessories
Assembling material
Name
Dimension
Quantity
Unit
Ref. no.
Al special solder
-
250 g bar
kg
10 066 04
Remarks
Binding twine
18/2 fold
10 m roll
piece
17 370 01
Sealing tape, green
15 x 2 mm
0.5 m roll
piece
22 025 01
EFGElit tape
20 x 0.2 mm
7.5 m roll
piece
21 475 01
EFGElit tape
40 x 0.2 mm
7.5 m roll
piece
21 475 02
Iron wire
1 mm Ø
20 m roll
piece
21 442 03
Emery paper, brown
40 mm wide, 80 grit
3 m roll
piece
10 136 09
contains no conductive particles
Emery paper, brown
40 mm wide, 180 grit
3 m roll
piece
10 136 06
contains no conductive particles
Emery paper, brown
40 mm wide, 400 grit
3 m roll
piece
10 136 07
contains no conductive particles
Earthing cable lug
16 mm² Cu M10
1
piece
21 595 72
Earthing cable lug
25 mm² Cu M10
1
piece
21 595 73
Earthing cable lug
35 mm² Cu M10
1
piece
21 595 74
16 + 25 mm² Cu M10
3+3 pieces
set
21 740 54
600 x 20 x 3 mm
1 strip
piece
21 475 03
Field control tape, slim
200 x 20 x 1 mm
1 strip
piece
21 475 11
Copper gauze sleeve
16 mm², tin plated
160 g/m
kg
10 180 10
Copper gauze sleeve
25 mm², tin plated
220 g/m
kg
10 180 11
Copper gauze sleeve
35 mm², tin plated
312 g/m
kg
10 180 09
Insulating tape (textile)
15 mm wide
5 m roll
piece
10 043 50
Self-bonding tape
19 x 0.75 mm
9 m roll
piece
21 418 01
Self-bonding tape
19 x 0.75 mm
4.5 m roll
piece
21 418 03
Cable tie, small
4.8 x 204 mm
1
piece
21 459 01
Cable tie, large
12 x 510 mm
1
piece
10 135 22
piece
26 018 01
Contact plate
Copper wire, tin plated
Ø 1.5 mm
15 m roll
piece
17 339 24
Copper braid tape
25 mm wide
10 m roll
piece
31 250 12
Copper braid tape
25 mm wide
15 m roll
piece
31 250 18
Copper braid tape, tin plated
25 mm wide
3 x 2.5 m roll
piece
21 798 03
Copper braid tape, tin plated
25 mm wide
3 x 5 m roll
piece
21 798 08
Copper braid tape, tin plated
25 mm wide
3 x 7 m roll
roll
21 798 12
Copper braid tape, tin plated
45 mm wide
3 m roll
roll
21 798 20
Self bonding tape, conductive
18 x 0.75 mm
4.5 m roll
piece
21 419 03
Self bonding tape, conductive
18 x 0.75 mm
0.5 m roll
piece
21 419 02
Semi-conductive tape
15 x 0.2mm
8 m roll
piece
21 419 01
10 ml bottle
piece
10 015 05
Semi-conductive varnish
Tin-lead-solder
35/65
bars
kg
10 066 01
Tin-lead-solder
60/40
bars
kg
10 066 02
5g
piece
Mastic
each 3 pieces 16 + 25 mm² in a bag
for earthing of Al-screening
26 066 01
for screw type connecter/cable lugs
Assembling paste
Tube, black lettering
40 g
piece
21 527 21
for connectors and terminations
Assembling paste
Tube, black lettering
60 g
piece
21 527 23
for connectors and terminations
Assembling paste
Tube, green lettering
40 g
piece
21 527 30
for joints
Adhesive tape
20 x 0.15 mm
10 m roll
piece
10 078 11
Contact spring
inner Ø = 44 mm, width = 20 mm
piece
10 186 23
application range 55-92 mm
Contact spring
inner Ø = 30 mm, width = 25 mm
piece
10 186 04
application range 35-72 mm
Contact spring
inner Ø = 23 mm, width = 16 mm
piece
10 099 89
application range 25-45 mm
Contact spring
inner Ø = 16 mm, width = 16 mm
piece
10 099 88
application range 20-30 mm
Protection bag
160 x 70 mm
1
piece
21 521 10
push-on device for terminations
Protection bag
90 x 70 mm
1
piece
21 521 11
push-on device for connectors
Protection sleeve
400 mm long
1
piece
21 521 12
push-on device for joint type JS 24-C
Silver cord, dry
2 mm Ø
200 g roll
piece
10 044 27
to remove the core insulation
Silver cord, dry
2 mm Ø
2m
piece
31 091 01
53
auxiliary
Earthing cable lug
Field control tape
Cable lugs for termination type TI + TO
Longitudinally sealed aluminium cable lugs,
uncoated, for indoor terminations.
Conductor
cross section
(mm²)
Dimension (mm)
rm sm* se* Die code no. Drilling depth
l
25 25 35
12
30
50
35 35 50
14
42
62
50 50 70
16
42
62
70 70 95
18
52
72
95 95 120
22
56
75
120 120 150
22
56
80
120 120 22
56
80
150 150 185
25
60
90
185 185 240
28
60
91
240 240 300
32
70
103
300 300 34
70
103
400 400 38
73
116
500 500 44
79
122
630 52
91
135
* Sector shaped conductors must be rounded
Longitudinally sealed copper cable lugs,
tin plated, for indoor and outdoor terminations.
Ref. no.
a
25
30
38
d1
13
17
13
17
44
52
d2
6.8
8
9.8
11.2
13.2
14.7
14.7
16.3
18.3
21
23.3
26
29
32
21 596 01
21 596 02
21 596 03
21 596 04
21 596 05
21 596 06
21 596 07
21 596 08
21 596 09
21 596 10
21 596 11
21 596 12
21 596 13
21 596 14
Conductor
cross section
(mm²)
rm
25
35
50
70
95
120
150
185
240
300
400
500
630
Dimension (mm)
Die code no. Drilling depth
10
20
12
20
14
28
16
28
18
35
20
35
22
35
25
40
28
40
32
50
38
70
42
70
44
80
l
38
40
45
48
57
58
59
68
68
83
96
114
125
Ref. no.
a
d1
24
13
26
30
38
44
17
21
Longitudinally sealed aluminium cable lugs,
tin plated, for outdoor terminations.
Conductor
cross section
(mm²)
rm
25
35
50
70
95
120
120
150
185
240
300
400
500
630
sm*
25
35
50
70
95
120
120
150
185
240
300
400
500
-
Dimension (mm)
se* Die code no. Drilling depth
35
12
30
50
14
42
70
16
42
95
18
52
120
22
56
150
22
56
22
56
185
25
60
240
28
60
300
32
70
34
70
38
73
44
79
52
91
l
50
62
62
72
75
80
80
90
91
103
103
116
122
135
a
25
30
38
44
52
* Sector shaped conductors must be rounded
auxiliary
a
Ref. no.
d1
13
17
13
17
d2
6.8
8
9.8
11.2
13.2
14.7
14.7
16.3
18.3
21
23.3
26
29
32
31 779 01
31 779 02
31 779 03
31 779 04
31 779 05
31 779 06
31 779 07
31 779 08
31 779 09
31 779 10
31 779 11
31 779 12
31 779 13
31 779 14
d1
l
d2
d2
7.0
8.2
10.0
11.5
13.5
15.5
17.0
19.0
21.5
24.5
27.5
31.0
33.1
31 557 02
31 557 03
31 557 04
31 557 05
31 557 06
31 557 07
31 557 08
31 557 09
31 557 10
31 557 11
31 557 12
31 557 13
56 104 03
Accessories
Conductor connector for joints type
JS 24-E, JS 24-C and AM
Conductor connector, non tension,
for aluminium-conductor
Conductor cross
Conductor connector, non tension,
for copper-conductor
Dimension (mm)
Ref. no.
Conductor cross
section
section
mm²
Die code
l
d1
d2
mm²
no.
Dimension (mm)
Die code
l
Ref. no.
d1
d2
no.
25
12
70
12
6.8
17 332 21
16
8
50
8.5
5.5
21 401 03
35
50
14
16
85
85
14
16
8
9.8
17 332 22
17 332 53
25
10
50
10.0
7.0
21 401 04
70
18
79
18
11.0
31 320 04
35
50
12
14
50
56
12.5
14.5
8.2
10.0
21 401 05
21 401 06
95
120
150
185
240
300
400*
500*
22
22
25
28
32
34
38
44
79
79
79
98
98
98
210
210
22
22
25
28
32
34
38.5
44
12.5
14.0
15.5
17.5
20.0
22.0
26
29
31 320 05
31 320 06
31 320 07
31 320 08
31 320 09
31 320 10
17 332 61
17 332 62
70
16
56
16.5
11.5
21 401 07
95
120
150
185
240
300
18
20
22
25
28
32
70
70
80
85
90
100
19.0
21.0
23.5
25.5
29.0
32.0
13.5
15.5
17.0
19.0
21.5
24.5
21 401 08
21 401 09
21 401 10
21 401 11
21 401 12
21 401 13
400*
500*
630*
38
42
44
150
160
160
38.5
42.0
44.0
27.5
31.0
34.5
21 401 14
21 401 15
21 401 16
* only for joint type type AM
* only for joint type type AM
l
d1
auxiliary
d2
55
Cable lugs for connector + adapter type CB+CC 12+24+36-630,
AB 12+24-630 and CB 36-400
Longitudinally sealed copper cable lugs
Conductor cross
Dimension (mm)
Ref. no.
section
mm²
25
35
50
70
Die code no.
10
12
14
16
d
7.0
8.2
10.0
11.5
31 503 21
31 503 22
31 503 23
31 503 24
95
120
150
185
240
300
18
20
22
25
28
32
13.5
15.5
17.0
19.0
21.5
24.5
31 503 25
31 503 26
31 503 27
31 503 28
31 503 29
31 503 30
28
16,5
Longitudinally sealed aluminium cable lugs,
tin plated
Conductor cross
Dimension (mm)
95
Ref. no.
50
section
mm²
25
35
50
70
95
120
150
185
240
300
Die code no.
12
14
16
18
22
22
25
28
32
34
d
6.8
8.0
9.0
11.0
12.5
14.0
15.5
17.5
20.0
22.0
26 014 21
26 014 22
26 014 23
26 014 24
26 014 25
26 014 26
26 014 27
26 014 28
26 014 29
26 014 30
d
Cable lugs for connector type CB+CC 36-630 (1250)
Longitudinally sealed copper cable lugs
Conductor cross
Dimension (mm)
Ref. no.
45
auxiliary
section
mm²
Die code no.
Drilling depth
l
d
300
400
500
32
38
42
52
74
74
121
143
143
24.5
27.5
31.0
26 336 10
26 336 11
26 336 12
630
44
80
149
34.5
26 336 13
Longitudinally sealed aluminium cable lugs,
tin plated
Conductor
cross section
mm²
300
400
500
630
Dimension (mm)
Die code no. Drilling depth
34
89
38
96
44
96
52
130
l
143
165
165
200
16,5
I
Ref. no.
d
23.3
26.0
29.0
35.0
26 335 10
26 335 11
26 335 12
26 335 13
d
Accessories
Screw type cable lug for connector type CB+CC 12+24+36-630,
AB 12+24-630 and CB 36-400
Reference no.
Range of application:
Al - round compacted
Al - round stranded
Al - round solid
Cu - round compacted
Cu - round stranded
26 098 08
25 - 95
25 - 70
25 - 95
25 - 70
25 - 70
26 099 06
70 - 240
95 - 185
70 - 240
70 - 240
70 - 185
26 098 11
300
300
300
-
-
26 098 13
--
--
--
300
300
Screw type cable lug for CB+CC 36-630 (1250)
Reference no.
26 098 14
Range of application:
Al - round compacted
Al - round stranded
Al - round solid
Cu - round compacted
Cu - round stranded
400 - 630
400 - 630
400 - 630
400 - 500
400 - 500
Screw type cable lug for connector type CE 24-400
Range of application:
Al - round compacted
Al - round stranded
Al - round solid
Cu - round compacted
Cu - round stranded
26 099 49
16 - 95
16 - 70
16 - 95
10 - 70
10 - 70
26 099 45
70 - 240
70 - 185
70 - 240
70 - 240
70 - 185
auxiliary
Reference no.
57
dielectric screen cutting tool
The DSC dielectric screen cutting tool allows an easy removal
of the solid extruded outer conductive layer on xLPE insulated
cables. The DSC tool is designed for core diameters of 16 up to
40 mm. This allows its use for the following cable sizes:
· 35 up to 500 mm² for 6/10(12) kV cables
· up to 400 mm² for 12/20(24) kV cables
· up to 300 mm² for 18/30(36) kV cables
The DSC tool has a fixed cutting depth of 0.7 mm which means a
simple operation and always homogeneous cutting, a knife with
1 mm cutting depth is also available The set consists of the tool,
a spare knife and a hexagon socket screw key in a tool box.
Reference no.
DSC set, complete
56 103 82
spare knife 0.7 mm
56 104 21
spare knife 1.0 mm
26 299 02
compression tool K 22
Compression tool K 22 for interchangeable dies, with crimphead,
rotates through 360°, with telescopic handles for crimping cable
lugs and crimp-on connectors. Length: infinitely adjustable from
560 to 860 mm. Weight: approx. 2.5 kg
bestell-Nr.
Compression tool K22 for crimping cable lugs
and crimp-on connectors for copper and aluminium conductors up to 240 mm² as well as circular pressing of sector conductors up to 300 mm²
31 585 05
Sheet steel case MK 22 for storing 17 pairs of pressing dies as well as compression tool K22, with
lock and carrying handle. Weight: approx. 3.5 kg
31 586 05
Dies for copper crimp cable lugs and connectors to DIN 64 235 hexagonal pressing, pressing width 5 mm
auxiliary
mm²
Reference
no.
Die code
no.
6
10
16
25
35
50
70
95
120
150
185
240
300
31 584 01 31 584 02 31 584 03 31 584 04 31 584 05 31 584 06 31 584 07 31 584 08 31 584 09 31 584 10 31 584 11 31 584 12 31 584 13
5
6
8
10
12
14
16
18
20
22
25
28
32
Dies for aluminium compression cable lugs and connectors to DIN 64 239 hexagonal pressing, pressing width 7 mm up to 185 mm², 5 mm up to 240 mm²
mm²
10
16-25
35
50
70
95-120
150
185
240
300
Reference
no.
31 584 21
31 584 22
31 584 23
31 584 24
31 584 25
31 584 26
31 584 27
31 584 28
31 584 29
31 584 30
Die code
no.
10
12
14
16
18
22
25
28
32
34
Dies for circular crimping of Al and Cu sector conductors (for 3 and 4 conductor sector cable). Circular crimping width = 19.5 mm.
se mm²
-
-
35
50
70
95
120
150
185
240
sm mm²
10
16
25
35
50
70
95
120
150
185
300
240
conductor
Ø mm
4.1
5.1
6.3
7.5
9
10.5
1.5
14
15.8
17.5
20.3
Reference
no.
31 584 41
31 584 42
31 584 43
31 584 44
31 584 45
31 584 46
31 584 47
31 584 48
31 584 49
31 584 50
31 584 51
Tools
cable sheath cutter
Cable sheath cutter removes outer cable sheaths and is adjustable for sheath thickness up to 8 mm. Its knife is designed to
lift the outer sheath at the cutting point in order to avoid damages of the screening. The knife has two preset positions for the
progress of the spiral cut and one position to finish the cutting
process. The cable sheath cutter can be used for single core cables from 35 mm² 10 kV up to 500 mm² 30 kV with an insulation
diameter of 15 - 50 mm.
Reference no.
Cable sheath cutter
56 108 46
Spare knife
56 108 48
Plastic insert to remove the core insulation
from plastic insulated round cables
56 108 47
insulation cutter
·
·
·
·
·
To remove core insulation
Longitudinal and axial cut with separate blades
Cutting depth limiter
Exchangeable blades
Full metal body
Reference no.
Insulation cutter
56 107 07
Holding tool for screw type connector
and screw type cable lugs
auxiliary
· For safe and easy holding of the screw type connector during
assembly
· Helps to avoid bending of the conductor during the connecting
process.
· usable for all size connectors
· Full metal body
· Lenght: approx. 40 cm
Reference no.
Holding tool
53 649 87
please ask for our tool list for further tools.
59
Pre-assembled connection cables
Pre-assembled connection cables simplify assembly and commissioning of medium voltage compact stations, switchgear,
transformers, generators and motors.
Qualified specialists of nkt cables GmbH Nordenham pre-assemble connection cables for various applications.
Depending on the specification, XLPE or flexible cables are
used. The required terminations and connectors are installed on
the cable according to customer specification.
Requested customer specification:
· nominal voltage
· description of required cable type
· length of connection line
· position of screening wire connection and length
· equipment interfaces
· required types of cable accessories
All pre-assembled cables are electrically tested in nkt cables
laboratory prior to despatch. This ensures reliable performance.
Upon request the wide range of own power cable accessories
can be completed with products from other manufacturers.
Connection between switchgear and
transformer with 250A bushings:
Connection between switchgear and
transformer with insulators:
Connection between transformer and termination
with support function
auxiliary
(e. g. installed in express trains of Deutsche Bahn AG):
Connection cables + coupling possibilities
auxiliary
Connection types and coupling possibilities
Coupling combinations:
B
CB 12+24-630
CC 12+24-630
CB 12+24-630
with
CP 630-C

with
CP 630-C
CC 12+24-630
with
CP 630-C
CB 36-630
with
CP 630-C
CB 36-630
(1250)
CC 36-630
(1250)
A
CB 36-630
CC 36-630
CB 36-630
(1250)
CC 36-630
(1250)
CSA 12 /
CSA 24
-
with
CP 630-C
-
ü
ü
with
CP 630-C
-
with
CP 630-C
-
ü
-
with
CP 630-C
ü
with
CP 630-C
-
ü
with
CP 630-M16
-
with
CP 630-M16
only as CC
36-630 M16
with
CP 630-M16
ü
M16-version
with
CP 630-M16
-
with
CP 630-M16
only as CC
36-630 M16
with
CP 630-M16
ü
M16-version
A
B
Please consider relevant U / U0 (Um). For surge arresters please note Uc / Ur and In
61
notes
we transport
renewable energy.
63
bildquelle: www.sxc.hu
nkt 12-36 kV Gb Katalog - Ausgabe 1. 9. 2009
Printed in Germany / www.ostedruck.de
Technische Änderungen vorbehalten
nkt cables GmbH
cable accessories
Helgoländer Damm 75
D-26954 nordenham
Phone: +49 (0) 47 31 / 364 - 436
Fax:
+49 (0) 47 31 / 364 - 364
e-Mail: info.nordenham@nktcables.com
internet: www.nktcables-acc.com
completing the picture