Delock 3.5″ Mobile Rack for 1 x 2.5″ SATA HDD / SSD

Delock 3.5″ Mobile Rack for 1 x 2.5″ SATA HDD / SSD
Description
This Delock Mobile Rack is designed for external or
internal connection of a 2.5″ SATA HDD. Insert the HDD
directly into the frame and connect it either externally to a
Power Over eSATA port with the help of an optional cable,
or internally to SATA. The dimension of the frame complies
to a standard 3.5″ HDD. Thus you can install the frame into
a 3.5″ slot as well as into a 5.25″ mobile rack.
Specification
• Connector:
outside: 1 x SATA 22 pin plug
inside: 1 x SATA 22 pin receptacle (NSS connector)
• Suitable for 2.5″ SATA HDD / SSD:
HDD height up to 12.5 mm
SATA HDD / SSD up to 6 Gb/s
support 5 V HDD / SSD
• Data transfer rate up to 6 Gb/s
• Possible applications:
1. internally in a 3.5″ bay
2. inside a 5.25″ mobile rack
3. externally over eSATAp (cable optional)
• Hot Swap
• With special SATA NSS connector inside to protect the
SATA connector of the HDD from wear at each change
• Optional HDD fan (mounting holes on the bottom side of mobile rack)
• OS independent, no driver installation necessary
Item No. 47224
EAN: 4043619472246
Country of origin: China
Package: Retail Box
System requirements
• For external using:
1. PC or notebook with a free Power Over eSATA port
(optional eSATAp cable item 84397 / 84396 / 84432)
• For internal using:
1. 1 SATA data cable
2. PC with a free SATA port
3. Power supply with a free SATA power connector
Package content
• Mobile Rack
• Screws
• User manual
© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.
www.delock.com
47224
1/2
16.01.2017
Images
© 2017 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes
and errors excepted.
Powered by TCPDF (www.tcpdf.org)
www.delock.com
47224
2/2
16.01.2017