SFP+ 10G Passive Copper Cable Assemblies

COMPONENT SPECIFICATIONS
SFP10-E0*
SFP+ 10G Passive Copper Cable Assemblies
APPLICATION
Leviton’s SFP+ passive cable assemblies are hot
pluggable to allow installation, removal, or exhange
of cables without turning off system power. In
environments where the pieces of active equipment
are to be directly attached in relatively close proximity
(distances up to seven meters) to each other, these
copper cable assemblies provide a more cost effective
alternative than an optical solution. This application is
common in ToR (Top of Rack) or EoR (End of Row)
data center configurations.
SPECIFICATION
Copper SFP+ Cable Assemblies shall be compliant
with Small Form Factor (SFF)-8431 specifications.
They shall be factory terminated using twinaxial copper
cable, available in lengths from one to seven meters,
and shall be capable of data transmission speeds
of up to 10 Gbps in either Fibre Channel or Ethernet
data environments. The cable assemblies shall have
a pull latch to release the assembly from active
equipment, and this latch shall be constructed and
located in such a way that belly-to-belly installation of
the cable assemblies is enabled, permitting the highest
possible cabling density. The cable assemblies shall
be RoHS compliant, and they shall provide superior
EMI performance for up to 10 Gbps data transmission.
The cable assemblies shall be hot pluggable to allow
changes without turning off system power. The cable
assemblies shall provide low power draw and low
latency for interconnects in data center applications.
SFP+ cable assemblies shall be independently tested.
FEATURES
• SFF-8431 compliant for SFP+ interconnects including Checksum EEPROM
• Meets requirements for data speeds up to 10 Gbps at distances up to seven meters
• Hot pluggable interconnect
• Low power, low latency
• Provides superior EMI performance for transmission speeds up to 10 Gbps
• Integrated strain relief ensures reliable performance
• Low-profile pull latch enables belly-to-belly cable installation
• Works in active 10G equipment with highest possible port density
• 100% factory terminated and independently tested
• Packaged in anti-static bag
DESIGN CONSIDERATIONS
• Allows ToR (Top of Rack) or EoR (End of Row) configurations with connections up to seven meters
• Use as a lower-cost alternative to optical transceiver connection of active equipment
• Observe minimum bend radius recommendations – no tighter than 5X that of cable outer diameter (OD)
• Observe cable support and slack storage recommendations
• Ensure that cable routing does not obstruct equipment air flow
• Hot pluggable
• Complements Leviton's extensive fiber offering for data center core and/or aggregation layers
STANDARDS COMPLIANCE
• Meets SFF-8431 requirements for SFP+ interconnects
• EIA 364 Electrical Connector Test Procedures including
Environmental Classifications
• Third party verified through the University of New Hampshire InterOperability Lab (UNH-IOL)
• RoHS Compliant
PHYSICAL SPECIFICATIONS
See page two
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit Leviton.com/warranty.
Page 1 of 2
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
Asia / Pacific
T +1.631.812.6228
E infoasean@leviton.com
Canada
T +1.514.954.1840
E pcservice@leviton.com
Caribbean
T +1.954.593.1896
E infocaribbean@leviton.com
China
T +852.2774.9876
E infochina@leviton.com
Colombia
T +57.1.743.6045
E infocolombia@leviton.com
tel 1-800-824-3005
tel +1-425-486-2222
appeng@leviton.com
www.leviton.com
Europe
T +33.6.8869.1380
E infoeurope@leviton.com
India / SAARC
T +91.80.4322.5678
E infoindia@leviton.com
Mexico
T +52.55.5082.1040
E lsamarketing@leviton.com
Middle East & Africa
T +971.4.886.4722
E lmeinfo@leviton.com
South Korea
T +82.2.3273.9963
E infokorea@leviton.com
Copyright © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
SFP10-E0*
10G bandwidth enables increased network efficiency
through greater server consolidation, virtualization and
convergence in data center applications. Small Formfactor Pluggable Plus (SFP+) cable assemblies support
server interconnects for high bandwidth 10G data center
applications. Leading electronics manufacturers provide
SFP+ compliant ports in active equipment to support up to
10G performance for network applications such as Fibre
Channel and 10 Gigabit Ethernet. The assemblies are
compatible with a wide variety of hubs, switches, routers,
servers, and network interface cards (NICs).
COMPONENT SPECIFICATIONS
SFP10-E0*
ELECTRONIC FILES
For CAD files, typical specs, or technical drawings (.DXF, .DWG), visit www.leviton.com.
2.3 in.
58.30 mm
.53 in.
13.55 mm
SFP10-E0*
P/N: XXXXX-XXX
S/N: XXXXXXXX
XOM XX AWG
MADE IN CHINA
.34 in.
8.55 mm
.45 in.
11.5 mm
PHYSICAL SPECIFICATIONS
Backshell
Zinc Diecast
Pull Release
Nylon
Lengths
1, 3, 5, and 7 meters
Wire Gauge
1 and 3 meter lengths: 30 AWG
5 and 7 meter lengths: 24 AWG
PART NUMBERS
Description
Part No.
SFP+ 10G Passive Copper Cable Assembly, 30 AWG, 1 meter length
SFP10-E01
SFP+ 10G Passive Copper Cable Assembly, 30 AWG, 3 meter length
SFP10-E03
SFP+ 10G Passive Copper Cable Assembly, 24 AWG, 5 meter length
SFP10-E05
SFP+ 10G Passive Copper Cable Assembly, 24 AWG, 7 meter length
SFP10-E07
Page 2 of 2
L11 3963
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
Asia / Pacific
T +1.631.812.6228
E infoasean@leviton.com
Canada
T +1.514.954.1840
E pcservice@leviton.com
Caribbean
T +1.954.593.1896
E infocaribbean@leviton.com
China
T +852.2774.9876
E infochina@leviton.com
Colombia
T +57.1.743.6045
E infocolombia@leviton.com
tel 1-800-824-3005
tel +1-425-486-2222
appeng@leviton.com
www.leviton.com
Europe
T +33.6.8869.1380
E infoeurope@leviton.com
India / SAARC
T +91.80.4322.5678
E infoindia@leviton.com
Mexico
T +52.55.5082.1040
E lsamarketing@leviton.com
Middle East & Africa
T +971.4.886.4722
E lmeinfo@leviton.com
South Korea
T +82.2.3273.9963
E infokorea@leviton.com
Copyright © 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.