rim-750 remote infrastructure management data sheet 60100

P R O D U C T D ATA S H E E T
REMOTE INFRASTRUCTURE MANAGEMENT (RIM-750)
K E Y F E AT U R E S
• Remote monitoring of sensors in your computer and
network equipment rooms
• Simple installation and setup
• Web-accessible with a clean, easy to use, mobilefriendly web interface that displays sensor readings
and trends
• Monitors eight digital inputs and four temperature
or temperature/humidity sensors, plus one zone of
leak detection with up to 200 feet (60 meters) of
Sensor Rope
• USB power inlet allows you to power RIM-750 with
the included wall adapter or a USB port on a server
or other device, such as the eConnect® PDU
• Multiple alarm notification configurations including
audible and visible indicators, email messaging
and/or relay activation
• Relay output allows for simple control of an
external device upon alarm condition
• Modbus or SNMP output enables simple
integration with other facility management systems
(BMS)
• Integrated logging and trending, including CSV
downloadable trending data
A P P L I C AT I O N S
• Continuous environmental and security monitoring
for a single server cabinet or a small computer or
telecommunications equipment room
• Interconnectivity with other building management
systems
USE WITH
• CPI Cabinet and Enclosure Systems
• CPI Rack Systems
• CPI Wall-Mount Systems
R E L AT E D A C C E S S O R I E S
• CPI Aisle Containment Solutions
• CPI Thermal Management Solutions
• CPI Power Management Products
• CPI Electronic Locking System
• CPI Power Management Tool
• CPI eConnect® PDUs
RIM-750 (P/N 60100-001)
The Remote Infrastructure Management (RIM-750) System from Chatsworth Products (CPI) provides
remote monitoring of environmental sensors for a single server cabinet or a small computer or
telecommunications equipment room. RIM-750 is easy to setup and use, providing web access to a
dashboard for monitoring real-time conditions and email notifications when conditions exceed userdefined thresholds. Use RIM-750 to provide critical early warning when site conditions change.
The RIM-750 is a compact appliance that has multiple inputs for monitoring a wide range of conditions.
There are four inputs for temperature and temperature/humidity sensors, eight digital inputs for dry
contact sensors, and a single input for leak detection. Use the digital inputs to monitor magnetic door
sensors, motion sensors, a smoke detector, or summary alarms from other equipment. The leak
detection connection supports a single zone with up to 200 feet (60 meters) of Sensor Rope. There is
also a single relay output (NO/NC) that can be triggered by one of the inputs.
RIM-750 has a simple, intuitive web based interface for easy setup and monitoring. The main
dashboard displays all sensor conditions in a single view: temperature data in gauges, digital inputs as
red/green status buttons, a checkmark or warning for leak detection, an open/close status of the relay,
and a window for displaying images from up to four web cameras. RIM-750 also summarizes events
and logs and displays temperature and humidity sensor data in a line graph on the main page so you
can see trends. For sensors and inputs, you select the alarm condition and how to respond to an alarm
with a sound, light, email and/or by enabling the relay. For leak detection, you can also set sensitivity
and monitor for both leak and cable break. You can also export temperature and humidity sensor log
data with a single click as a text file with comma-separated values.
For notifications, you can designate a single email address for alarms, which are sent through your
SMTP server, or forward alarms as SNMPv2 traps or Modbus/TCP to other facility management
systems. RIM-750 is an excellent choice for monitoring a single cabinet or a small equipment room.
Consider the RIM-1000 if you need to monitor more sensors or a larger space.
See inside for product details or contact CPI Technical Support for configuration assistance.
800-834-4969
techsupport@chatsworth.com
www.chatsworth.com
REMOTE INFRASTRUCTURE MANAGEMENT (RIM-750)
P R O D U C T D ATA S H E E T
S P E C I F I C AT I O N S
• Web Interface Login Security:
- 8 password read only, 8 password read/write
• Communication Port:
- Ethernet: 10/100 BaseT, RJ45 connector; 500VAC RMS
isolation; DHCP enabled; Static IP-addressable
• Protocols:
- TCP/IP: ARP; DNS; UDP; DHCP; ICMP
- HTML: Supports multiple simultaneous connections
- SMTP (email): SMTP authentication; SMTP relay; supports
SSL; up to 8 recipients
- Modbus TCP/IP: Modbus slave; TCP/IP transmission protocol
- SNMP: V1; V2C MIB-2 compliant; NMS manageable with Get
and Traps; V2C Get, V2C and V1 Traps
- NTP: Custom server settings
• Logging: Logs 50 most recent alarm and return to normal events with date/time
stamp.
• Trending: Records up to 86,400 points of sensor data. Sample interval set from 1
second to 1 day. CSV downloadable.
• Operating Environment
- Temperature: -40°F to 185°F (-40°C to 85°C)
- Humidity: 0% to 100% RH, non-condensing
- Altitude: 15,000ft (4,572m) max.
- Storage Environment: -40°F to 185°F (-40°C to 85°C)
• Dimensions: 1.00”H x 5.63"W x 2.63"D (25mm x 143mmW x 67mmD)
• Weight: 10.1 oz. (287g)
• Mounting: Stand alone; keyholes included for wall mount; rack-mount bracket
available
• Certifications: CE; ETL listed: conforms to UL 61010-1, EN 61010-1; certified to CSA
C22.2 NO. 61010-1; RoHS compliant
• Includes:
- 1 x RIM-750
- 1 x network cable, 3.3ft (1m) long
- 1 x USB power adapter with USB mini B to USB A cable
• Power:
- USB mini-B power inlet, (US) 5VDC @ 500mA max.
- Includes a 110/240VAC 50/60Hz; Wall adapter to USB
connector
- Power with included wall adapter or from USB port with 5VDC
@ 500mA max. output
• Wired Inputs:
- Temperature/Humidity: 4 each, 1-wire digital temperature or
1-wire digital temperature/humidity sensor inputs;
plug-and-play; configurable alarm points
- Digital: 8 each, digital alarm points; configurable
- Leak Detection: 1 each, zone leak detection, supports 200 ft
(60 m) of conductive fluid Sensor Rope; Leak Detection Lead
Cable and Sensor Rope(s) must be ordered separately
• Relay Output:
- 1 each, Form C summary relay; 2A @ 30VDC, 0.5A @125VAC;
configurable as summary alarm output or manual operation
• Alarm Notification:
- Panel: Audible alarm, visible LED
- Integrated Web Interface: Dashboard overview with alarm
indicators
- Email: up to 8 email recipients; email sent on alarm to all
recipients, distribution list, or email-to-SMS
- SNMP Traps: Multiple community strings
- Relay: 1 Form C summary relay output
O R D E R I N G I N F O R M AT I O N
Part
Number
Description
Shipping Weight
60100-001
RIM-750, with 4 Temperature/Humidity inputs, 8 digital inputs,
1 leak detection input, 1 relay output, black
2 (0.9)
60100-002
RIM-750 and Leak Detection Kit Bundle, includes 1 RIM-750 with a Leak
Detection Lead Cable and 200’ (60 m) of Leak Detection Sensor Rope
9 (4.1)
Note: Leak Detection Lead Cable and Leak Detection Sensor Ropes can also be ordered separately.
Front and back view.
2
REMOTE INFRASTRUCTURE MANAGEMENT (RIM-750)
P R O D U C T D ATA S H E E T
ACCESSORIES
Leak Detection Lead Cable
Leak Detection Lead Cable is used to attach Leak Detection Sensor
Rope to the single leak detection input on the RIM-750. This kit
includes a 15’L (4.57 m) cable that connects the RIM-750 to the
Leak Detection Sensor Rope and an End-of-Line Terminator that is
attached to end of the Sensor Rope. Sensor Ropes are available in
several lengths and multiple Sensor Ropes can be attached endto-end to create longer lengths. The RIM-750 can support up to
200 feet (60 m) of Sensor Rope. One Leak Detection Lead Cable is
required to attach Sensor Rope(s) to each RIM-750.
• Includes one 15’L (4.57 m) leader cable for attaching Sensor
Rope(s), and an End of Line Terminator for attachment to the
Sensor Rope
• Leader Cable: 22 AWG, 4-conductor cable, .121” (.307 cm)
nominal outside diameter
• Standards: NEC Article 725-CL2P, CMP, MPP
• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Operating Humidity: 5% to 95% RH, non-condensing
• Maximum Altitude: 15,000 ft (4,572m)
• Storage Temperature: -4°F to 158°F (-20°C to 70°C)
• Cable Length: 15 feet (4.57 meters)
• EOL Terminator Dimensions: 0.9”W x 2.0”L (22.9 mm x 50.8 mm)
• Weight: Cable-4.24 oz (120.2g); EOL-0.4 oz (11.3g)
• Material: Plastic housing
• Color: White/Black
Rack Mount Bracket
• Holds two RIM-750 units
• 1U x 19”EIA x 3”D (76 mm)
• Black Finish
Part
Number
Description
Shipping
Weight
lb (kg)
60107-001
Rack-Mount Bracket,
1U x 19”EIA x 3”D (76 mm)
1 (0.5)
Temperature Sensor
Use the Temperature Sensor to take temperature measurements
close to the RIM-750. The Temperature Sensor attaches to one
of the four Temperature/Humidity inputs on RIM-750.
• Sensor Type: Temperature
• Connector: RJ11
• Cable Length: 25’L (7.6 m)
• Operating Temperature: -67°F to 257°F (-55°C to 125°C)
• Temperature Accuracy: ±0.125°
Part
Number
Description
Shipping
Weight
lb (kg)
60108-001
Temperature Sensor, RJ11,
25’L (7.6 m) cord
1 (0.5)
Shipping
Weight
lb (kg)
60108-002
Temperature and Humidity Sensor,
RJ11, 25’L (7.6 m) cord
1 (0.5)
Shipping
Weight
lb (kg)
60116-001
Leak Detection Lead Cable, 15’L (4.57 m)
and End of Line Terminator
1 (0.5)
Leak Detection Sensor Rope
The Sensor Rope detects the presence of water. The Sensor Rope
is constructed of a strong, durable, non-conductive polymer to
reduce false alarms, while remaining highly flexible for easy
placement around equipment. Sensor Ropes attach to the RIM-750
through the Leak Detection Lead Cable. Sensor Ropes are
available in three lengths. Connect Sensor Ropes end-to-end to
extend length.
• Plenum Rating: CL2P (UL)
• Sheer Strength: >180 lb (>81.65 kg)
• Cut Through Resistance: >40 lb (>18.14 kg) with .005”
(0.127 mm) blade
• Abrasion Resistance: 60 cycles per UL 719
• Operating Temperature: 32°F to 167°F (0°C to 75°C)
• Operating Humidity: 5% to 95% RH, non-condensing
• Maximum Altitude: 15,000 ft (4,572m)
• Storage Temperature: -22°F to 185°F (-30°C to 85°C)
• Size: Rope not >0.25” (6.35 mm) diameter
• Connector: 4 pin, 0.96” (24.38 mm) diameter
• Weight: .02 lb/ft (29.74 g/m)
• Material: Composite polymer
• Color: Orange/Black
• Certifications: CE; UL CL2P; RoHS Compliant; Plenum Rated
Use the Temperature and Humidity Sensor to take temperature
and humidity measurements close to the RIM-750. The
Temperature and Humidity Sensor attaches to one of the four
Temperature/Humidity inputs on RIM-750.
• Sensor Type: Temperature and humidity
• Connector: RJ11
• Cable Length: 25’L (7.6 m)
• Operating Temperature: -40°F to 185°F (-40°C to 85°C)
• Temperature Accuracy: ±0.125°
• Humidity: 5% to 95% RH, non-condensing
Description
Description
Note: Order Leak Detection Sensor Ropes separately.
Temperature and Humidity Sensor
Part
Number
Part
Number
Sensor Rope, 10 ft L (3.0 m)
Shipping
Weight
lb (kg)
1 (0.5)
60109-004
Sensor Rope, 25 ft L (7.6 m)
1 (0.5)
60109-005
Sensor Rope, 50 ft L (15.2 m)
3 (1.4)
Part
Number
Description
60109-003
Note: A Leak Detection Lead Cable is required to attach Sensor
Ropes to a RIM-750. Each RIM-750 can support up to 200 feet (60
meters) of Sensor Rope, or a mix of Sensor Rope and Leak Spot
Detectors. Each Leak Spot Detector reduces the total length of
Sensor Rope supported by 50 feet (30.2 meters). Use J-Clips
(ordered separately) to install Leak Detection Sensor Rope.
3
REMOTE INFRASTRUCTURE MANAGEMENT (RIM-750)
P R O D U C T D ATA S H E E T
ACCESSORIES
J-Clips For Leak Detection Sensor Rope
Smoke Detector
Use J-Clips to install Leak Detection Sensor Rope. J-Clips are
constructed of durable nylon with an adhesive backing for easy
and secure installation.
• Operating Environment (Adhesive): -4°F to 122°F
(-20°C to 50°C)
• Size: 1.1”H x 1”W x 0.5”D (28 mm x 25 mm x 12 mm)
• Weight: 0.3 lb (0.1 kg)
• Material: UL94 V-1, RMS-05 Nylon
• Color: White
Surface-mount, wired, photoelectric smoke detector with twopiece construction that allows pre-wiring of the installation
base with plug-in head. The Smoke Detector includes an
external power supply and attaches to one of the eight digital
inputs on the RIM-750.
• Input Power: 12/24V non-polarized (nominal); 8.5V (minimum);
35V (maximum)
• Maximum Ripple Voltage: 30% peak-to-peak of
applied voltage
• Standby Current: 50µA maximum average
• Sensitivity: 2.5%/ft nominal
• Alarm Contact Ratings: 0.5A @ 30V AC/DC
• Maximum Alarm Current: 20mA @ 12V, 23mA @ 24V
• Operating Temperature Range: 32°F to 120°F (0°C to 49°C)
• Operating Humidity Range: 0 to 95% RH, non-condensing
• LED indicators: Red and Green indicate power up, normal,
out of sensitivity, and alarm conditions
• Mounting: 3.5” octagonal back box, 4” octagonal back box,
single-gang back box, 4” square back box with a plaster ring,
direct mount to ceiling/wall
• Input Terminals: 14 to 22 AWG
• Size: 2.0”H x 5.3” diameter (51 mm x 127 mm diameter)
• Weight: 6.3 oz (178 g)
• Material: Housing, plastic
• Color: White
Part
Number
Description
60109-006
J-Clips, Pack of 10
Shipping
Weight
lb (kg)
1 (0.5)
60109-007
J-Clips, Pack of 50
1 (0.5)
Note: Use J-Clips (ordered separately) to install Leak Detection
Sensor Rope.
Leak Spot Detector
Leak Spot Detector is used to detect liquid in a specific spot,
such as, inside of a condensation drip pan. The Spot Detector
features a small enclosure with adjustable probes. It can be
attached to a flat surface and submerged in water. Leak Spot
Detector attaches to one of the eight digital inputs on the RIM750. You can use up to four Leak Spot Detectors with RIM-750;
however, each Leak Spot Detector counts as 50 feet (15.2
meters) of Sensor Rope and will reduce the total length of Leak
Detection Sensor Rope supported by the RIM-750 by 50 feet
(15.2 meters). For example, you could use two Leak Spot
Detectors and 100 feet (30.4 meters) of Leak Detection Sensor
Rope.
• Includes one spot detector sensor with an attached 14’L
(4.27 m) non-sensing two-wire leader cable
• Solid State Output: 12-36VAC @ 0.01A min., 0.1A max. or
18-36VDC @ 0.01A min., 0.1A max.
• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Operating Humidity: 5% to 95% RH, non-condensing
• Maximum Altitude: 15,000 ft (4,572m) max.
• Storage Temperature: -4°F to 158°F (-20°C to 70°C)
• Dimensions: 2.0”H x 1.5”W x 1.0”D (51 mm H x 39.4 mm W
x 25.4 mm D)
• Weight: 4 oz. (105 g)
• Material: Plastic housing
• Color: Black
• Certifications: CE; ETL listed: conforms to UL 61010-1,
EN 61010-1, RoHS compliant
Part
Number
Description
Shipping
Weight
lb (kg)
60109-001
Leak Spot Detector,
with 14’L (4.2 m) cable
1 (0.5)
Part
Number
Description
60113-002 Smoke Detector, Power Supply included
Shipping
Weight
lb (kg)
2 (0.9)
Power Fail Monitor
Power Fail Monitor plugs into a standard 120 VAC NEMA 5-15
outlet to monitor for power loss. Secures to the outlet to ensure
it is not accidentally disconnected and signals power loss
through a Form C output relay. Power Fail Monitor attaches to
one of the eight digital inputs on the RIM-750.
• Input: NEMA 5-15 plug, 3-prong (with ground)
• Power: 120 VAC @ 15mA
• Output: Relay, 1 Dry Contact, Form C; 10A @ 120 VAC;
5A @ 30 VDC
• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Operating Humidity: 5% to 95% RH, non-condensing
• Maximum Altitude: 15,000 ft (4,572 m)
• Storage Temperature: -4°F to 158°F (-20°C to 70°C)
• Size: 3.5”H x 2.375”W x 2.25”D (89 mm x 60 mm x 57 mm)
• Weight: 0.21 lb (0.01 kg)
• Material: Housing, plastic
• Color: Black
Note: RIM-750 can support a maximum of 4 Leak Spot Detectors.
When using a mix of Sensor Rope and Leak Spot Detectors, each
Leak Spot Detector reduces the total footage of Sensor Rope
supported by 50 feet (15 m). For example, if you use two leak Spot
Detectors, the RIM-750 will support up to 100 feet (30 m) of
Sensor Rope. Be sure to reduce the total Sensor Rope Length of
200 feet (60 meters) by 50 feet (15.2 meters) for each Leak Spot
Detector that you use.
4
Part
Number
Description
Shipping
Weight
lb (kg)
60110-001
Power Fail Monitor, with 120 VAC,
15A connection
1 (0.5)
REMOTE INFRASTRUCTURE MANAGEMENT (RIM-750)
P R O D U C T D ATA S H E E T
S P E C I F I C AT I O N S
Motion Detector
Magnetic Door Sensor
The Motion Detector is a surface-mounted, wired, passive
infrared motion detector designed for wall-to-wall coverage
across a wide temperature range. When wall-mounted around
10 feet (3 meters) high, Motion Detector covers a cone-shaped
area with a maximum span of about 60 feet (18.2 m) and a
maximum range of about 50 feet (15.2 meters). The Motion
Detector includes an external power supply and attaches to one
of the eight digital inputs on the RIM-750.
• Input Power: 9.5 VDC to 14.5 VDC
• Maximum Ripple Voltage: 3 V peak-to-peak @ 12 VDC
• Standby Current: 15 mA @ 12 VDC
• Current in Alarm: 18 mA @ 12VDC
• Contact Rating: 100mA @ 24VDC
• Alarm Contact Resistor in Common: 10 Ohm, 0.25W
• Operating Temperature Range: -4°F to 140°F (-20°C to 60°C)
• Operating Humidity Range: 0 to 95% RH, non-condensing
• RF Immunity: 50V/m from 0.01 to 1,200 MHz
• Static Immunity: 8kV Contact, 15kV Air
• Transient Immunity: 2.4 kV @ 1.2 joules
• White Light Immunity: 20,000 Lux @ Device
• Walk Detection Speed: 0.5 to 10 ft/s (0.15 to 3 m/sec)
• Alarm Duration: 2 to 3 seconds
• Coverage Angle: 90° Minimum
• Mounting Height Range: 6 to 10.5 ft (1.8 to 3.2 m)
• Mounting: direct mount to wall
• Size: 3.0”H x 2.5”W x 1.87”D (89 mm x 64 mm x 48 mm)
• Material: Housing, plastic
• Color: White
The Magnetic Door Sensor is a surface-mounted, wired,
magnetic proximity sensor used to detect when a door is opened
and closed or when a cover panel is attached or removed. The
Magnetic Door Sensor is designed for quick and easy
installation as well as a long life (4 million operations). The
Magnetic Door Sensor attaches to one of the eight digital inputs
on the RIM-750.
• Contact Ratings: 3.0W max. @ 30 VDC or 30 VAC max. @ 0.3A
max.; 1.0 msec. max. operate time (including bounce); 1.0
Amp max. carry current
• Contact Resistance: 100 mOhm max. initial
• Dielectric Strength: 200 VDC min.
• Electrical Circuit: SPST NO (contact Form A). Reed switch
opens when magnet is removed from proximity. Contacts are
held closed when magnet is in actuation range.
• Operating Temperature Range: -40°F to 212°F
(-40°C to 100°C)
• Operating Distance/Alignment: 1.25” (31.8 mm) make gap;
Operate (make) points are nominal values with ±10%
tolerance. Release points are 110% to 150% of the operating
points.
• Size: 2.5”H x 1.25”W x .625”D (63.5 mm x 31.8 mm x 15.9 mm)
• Material: Housing, plastic
• Color: White
Part
Number
Description
Shipping
Weight
lb (kg)
60114-002
Motion Detector,
Power Supply included
2 (0.9)
Part
Number
Description
Shipping
Weight
lb (kg)
60115-001
Magnetic Door Sensor
1 (0.5)
While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions
and reserves the right to change information and descriptions of listed services and products.
©2014 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, CPI, CPI Passive Cooling, eConnect, MegaFrame,
Saf-T-Grip, Seismic Frame, SlimFrame, TeraFrame, GlobalFrame, Cube-iT Plus, Evolution, OnTrac, QuadraRack and Velocity
are federally registered trademarks of Chatsworth Products. Simply Efficient is a trademark of Chatsworth Products.
All other trademarks belong to their respective companies. 07/14 MKT-60020-614