Pin Out : J1 Pin Function Wire Color Description 1 +12VDC In

Pin Out :
J1
Pin
1
2
3
4
5
6
7
8
J2
Pin
1
2
3
4
Function
+12VDC In
Ground In
Pulse In
Credit Return
Meter + (12VDC)
Meter /System Enable
Optional Input
Wire Color
Orange
Black
Green
White
None
Grey
Yellow
Blue
Description
Power In
Power In
Pulse from Game
Pulse to Game (optional)
Can be used for ticket meter +
Can be used for ticket meter Grounded (low) when system OK
Currently Not Used
Function
Mech Power +
Mech Power /Notch Sensor
Enable
Wire Color
Red
Black
Green
White
Description
+12VDC for the Mechanism, Switched
Ground for the Mechanism
Grounded (low) when notch detected
+5VDC (high) when mech running
Settings :
Pulse In Timeout
Timeout Value
Return Points
On Ticket Error
Divide Return
By 5
Pulses per Ticket
Or Multiplier
Divide or Multiply
Should the unit do something when the pulses in stop or should
It store them until enough arrive for another ticket. Not applicable
in multiply mode.
2 or 10 Seconds. If no more pulses arrive for this period of time
the unit will consider it a timeout. Only applicable if Pulse In
Timeout is on.
If the unit detects a jammed or empty dispenser, should it hold the
tickets owed or try to return them to the game.
If there are points to be returned should they be divided by 5. This
is used by games that have a locked in value of 25c on the credit
input. Normally the credit return should be connected to an input
that supports 1 pulse = 1 credit.
This is the number of pulses to get 1 ticket when set to divide or
the number of tickets you get for 1 pulse if set to multiply. The
special value “One Tick” gives one ticket out no matter the number
of pulses in.
Just that should the unit multiply or divide by the previous setting.
Uni-Tick V1.00
(For MaxiTick PCB V2)
Overview:
The Uni-Tick V1.00 software will allow the MaxiTick board to count the number of
hands/ rounds played and use this number as the maximum number of tickets to
dispense. It is compatible with any board that has a start/play lamp that goes
out during a hand/round such as the “Cherry Master” type boards and most
poker games. It also has a game over/bonus round timer that will hold the
number of hands for that length of inactivity (the lamp is out) to allow a player
to add credits at the end of a game or to play a bonus round where the lamp
is inactive without losing the hand/round count. After a ticket collect the hand/
round counter is zeroed which constitutes a complete play cycle, or after the game
over and the machine remains idle for the selected length of time the hand/round counter
is cleared.
Instructions:
1:
Mount the PCB in a convenient location.
2:
Connect the 4 wire harness to the ticket dispenser and the PCB.
3:
The 8 pin harness connects as follows:
Red wire
=
+12VDC
Black wire
=
Ground
Green wire
=
Pulse In (pin 28 parts side on most Cherry Master style
Games)
White wire
=
Unused credit return . (Optional) (pin 8 parts side on most
Cherry Master style games).
Blue wire
=
Hand Count.(Optional) The start lamp - (minus/driver
side,not the power wire).
4:
Set the DIP switch for the desired operation (see table).
5:
Apply power, wait 10 seconds then test.
Uni-Tick V1.00
Description
Value
1
2
3
4
1
0
0
0
0
2
1
0
0
0
4
0
1
0
0
5
1
1
0
0
8
0
0
1
0
10
1
0
1
0
20
0
1
1
0
25
1
1
1
0
40
0
0
0
1
one
50
1
0
0
1
Ticket
100
0
1
0
1
200
1
1
0
1
250
0
0
1
1
500
1
0
1
1
1000
0
1
1
1
2000
1
1
1
1
Pulses
in to
get
Return Credit
Timing
5
Fast
0
Slow
1
6
7
Pulse In
Timeout
Yes
0
No
1
Divide Return
Credits by 5
No
0
Yes
1
Return Points
on Tickets out
Count Hands
Played
Hand Count
Timeout
8
No
0
Yes
1
9
No
0
Yes
1
10
2 Min.
0
4 Min.
1
Uni-Tick 2.06
Description
Value
1
2
3
4
1
0
0
0
0
2
1
0
0
0
4
0
1
0
0
5
1
1
0
0
8
0
0
1
0
10
1
0
1
0
20
0
1
1
0
25
1
1
1
0
get
40
0
0
0
1
one
50
1
0
0
1
100
0
1
0
1
200
1
1
0
1
250
0
0
1
1
500
1
0
1
1
1000
0
1
1
1
2000
1
1
1
1
5
6
7
8
9
10
Pulses
in to
Ticket
Return Credit
Timing
Fast
0
Slow
1
Pulse In
Timeout
Yes
0
No
1
Divide Return
Credits by 5
No
0
Yes
1
Return Points
on Tickets out
Count Hands
Played
Hand Count
Timeout
No
0
Yes
1
No
0
Yes
1
2 Min.
0
4 Min.
1