12.1” Sunlight Readable LCD Monitor 15”

12.1” Sunlight Readable LCD Monitor 15”
LED-1211VB
MODEL NUMBERS
SPECIFICATIONS
LED-1211VB
Resolution
1024(H) x 768(V)
Brightness rating
1000 Nit
Pixel Pitch
0.24(H) x 0.24(V)mm
Contrast Ratio
700 : 1
Display Modes
VGA, SVGA
Ultra-bright technology provides sunlight readability
Back Light
LED
Mercury and lead free green design
Input Signal
Composite NTSC/PAL (menu select),
S-Video, analog RGB
DESCRIPTION
LED backlight provides longer life, uses less power and provides better color saturation
High shock and vibration resistance
Colors
262,144
Number of Pixels
786,432
Pixel Configuration
Stripe
Input signal Level
1.0V P-P (positive) 75 Ohm
Viewing angle (L/R/T/B)
70/70/70/70
Dimensions (WHD)
338 x 278 x 59mm / 13.3" x 10.9" x 2.3"
Built-in interface for wall or arm mounting VESA 75mm FPMPI compliant
Actual Visible
screen size (WH)
246 x 184.5mm/ 9.7" x 7.3"
Response Time: 23ms
Operating temperature
32 ~ 122°F or 0 ~ 50°C, 95 % RH
Storage temperature
-4 ~ 140°F or -20 ~ 60°C, 95% RH
Power Requirement /
Consumption
Regulated 12VDC, 5A, negative ground
Part No. DC-1500 required for use in vehicles /
18.5 W (max)
Includes switching
power supply
110 ~ 240VAC, 5 A / 47 ~ 63Hz
Rear Terminal
Connections
Composite BNC video IN/OUT jacks,
S-Video IN jack
PC: 15-pin mini D-sub (female),
Power: 2.1mm DC IN jack
Weight
Net 3.4 kg / 7.5 lbs Gross 4.5 kg / 10 lbs
On-screen display for: brightness, contrast, back light, hue
Composite, S-Video, PC capability
Low power consumption
Case made of durable steel
Active matrix technology allows wide viewing angle
Front controls for power, menu, up/down
OPTIONAL ACCESSORIES
DC-1500
Factory approved car cord
HM-400
Under-cabinet hinge mount bracket
WM-30
Wall mount bracket (fixed and locking)
WM-31
Wall mount bracket (fixed)
WM-302
Wall mount with swing arm & 4-way
WMC-1015 Ceiling mount
© ToteVision. Specifications subject to change without notice. 60K
T: 206-623-6000 F: 206-623-6609 E: sales@totevision.com TOTEVISION