YOGA 700-14ISK UG EN-01

Lenovo YOGA 700
YOGA 700-14ISK
User Guide
Read the safety notices and important tips in the
included manuals before using your computer.
Notes
• Before using the product, be sure to read Lenovo Safety and General
Information Guide first.
• The latest electronic compliance and environmental information are
available from the Lenovo compliance information Web sites.
- To view compliance information go to:
http://www.lenovo.com/compliance
- To download environmental information go to:
http://www.lenovo.com/ecodeclaration
• Some instructions in this guide may assume that you are using
Windows® 10. If you are using another Windows operating system,
some operations may be slightly different. If you are using other
operating systems, some operations may not apply to you.
• The features described in this guide are common to most models. Some
features may not be available on your computer or your computer may
include features that are not described in this user guide.
• The illustrations in this manual may differ from the actual product.
Please refer to the actual product.
Regulatory Notice
• For details, refer to Guides & Manuals at http://support.lenovo.com.
First Edition (July 2015)
© Copyright Lenovo 2015.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.
Contents
Chapter 1. Getting to know your computer ......................................... 1
Top view ..................................................................................................................... 1
Left-side view ............................................................................................................ 8
Right-side view ........................................................................................................ 11
Bottom view ............................................................................................................. 14
Chapter 2. Starting to use Windows 10 ............................................. 15
Configuring the operating system for the first time ........................................... 15
Operating system interfaces ................................................................................... 15
Putting the computer to sleep or shutting it down ............................................. 17
Task and desktop management ............................................................................. 19
Connecting to a wireless network ......................................................................... 20
Get Started app ......................................................................................................... 20
Touch screen operation ........................................................................................... 21
Chapter 3. Lenovo OneKey Recovery system .................................. 24
Chapter 4. Troubleshooting ................................................................ 26
Frequently asked questions ................................................................................... 26
Troubleshooting ...................................................................................................... 28
Trademarks ........................................................................................... 31
i
Chapter 1. Getting to know your computer
Top view --------------------------------------------------------------------------------------------------$
(
%
&
'
)
Note: The dashed areas indicate parts that are not visible externally.
 Attention:
• When closing the display panel, be careful not to leave pens or any other objects in between
the display panel and the keyboard. Otherwise, the display panel may be damaged.
1
Chapter 1. Getting to know your computer
Use the camera for video communication.
a Integrated
camera (on select
models)
b Multi-touch
screen
The LCD display with LED backlight provides brilliant
visual output. Multi-touch function is available on this
display.
c Windows button
Opens/closes the start menu.
d Built-in
microphones
Capture sound which can be used for video conferencing,
voice narration, or audio recording.
e Wireless LAN
antennas
Connect to a wireless LAN adapter to send and receive
wireless radio signals.
f Touch pad
The touch pad functions as a conventional mouse.
Touch pad: To move the pointer on the screen, slide your
fingertip over the pad in the direction in which you want
the pointer to move.
Touch pad buttons: The functions of the left/right side
correspond to those of the left/right mouse button on a
conventional mouse.
Note: You can enable/disable the touch pad by pressing F6 (
2
).
Chapter 1. Getting to know your computer
 Using the keyboard
Hotkeys
You can access certain system settings quickly by pressing the appropriate
hotkeys.
:
Mutes/unmutes the
sound.
:
Enables/disables Airplane
mode.
:
Decreases the volume
level.
:
Displays all currently
active apps.
:
Increases the volume level.
:
Turns on/off the backlight
of the LCD screen.
:
Closes the currently active
window.
:
Toggles the display
between the computer and
an external device.
:
Refreshes the desktop or
the currently active
window.
:
Decreases display
brightness.
:
Enables/disables the touch
pad.
:
Increases display
brightness.
Note: If you changed the Hotkey Mode from Enabled to Disabled in the BIOS setup utility,
you will need to press the Fn key in combination with the appropriate hotkey.
3
Chapter 1. Getting to know your computer
Function key combinations
Through the use of the function keys, you can change operational features
instantly. To use this function, press and hold Fn a; then press one of the
function keys b.
b
b
a
b
The following describes the features of each function key.
Fn + Esc:
Switches to paper display mode.
4
Fn + Home:
Activate the pause function.
Fn + End:
Activate the break function.
Fn + PgUp:
Enable/Disable the scroll lock.
Fn + PgDn:
Activate the insert function.
Fn + Space
(on select models):
Turn on/off the keyboard backlight.
Chapter 1. Getting to know your computer
 Positioning the display panel
The display panel can be opened to any angle up to 360 degrees.
Notebook Mode
Suitable for tasks that require a keyboard and mouse (such as creating
documents, writing e-mails, and so on).
5
Chapter 1. Getting to know your computer
Stand Mode (Theater Mode)
Suitable for tasks that require little or no touch (such as viewing photos or
playing videos).
Tablet Mode
Suitable for tasks that require touching the screen often (such as surfing the
Web, playing games, and so on).
6
Chapter 1. Getting to know your computer
Tent Mode (Presentation Mode)
Suitable for tasks that require limited interaction with the touch screen (such
as displaying graphs or PowerPoint presentations).
 Attention:
• Do not open the display with too much force, otherwise the panel or hinges may be
damaged.
Note: The keyboard and touch pad are automatically locked when the screen is opened
beyond 190 degrees (approximately).
7
Chapter 1. Getting to know your computer
Left-side view --------------------------------------------------------------------------------------
a
b c
d
a AC power adapter Connects to the AC power adapter.
jack
b USB 3.0 port
Connects to USB devices.
Note: If the battery charge is more than 20%, the USB port with a
mark supports charging
of an external USB device, even when the computer is turned off.
c
Combo audio
jack
Connects to headsets.
Notes:
• The combo audio jack does not support conventional microphones.
• The recording function may not be supported if third-party headphones or headsets are
connected, due to different industry standards.
d Memory card slot Insert memory cards (not supplied) here.
Note: For details, see “Using memory cards (not supplied)” on page 10.
8
Chapter 1. Getting to know your computer
 Connecting USB devices
You can connect a USB device to your computer by inserting its USB plug
(Type A) into the USB port on your computer.
The first time you plug a USB device into a particular USB port on your
computer, Windows automatically installs a driver for that device. After the
driver has been installed, you can disconnect and reconnect the device
without performing any additional steps.
Note: Typically, Windows detects a new device after it has been connected, and then installs
the driver automatically. However, some devices may require you to install the driver
before connecting. Check the documentation provided by the device’s manufacturer
before connecting the device.
Before disconnecting a USB storage device, make sure your computer has
finished transferring data to that device. Click the Safely Remove Hardware
and Eject Media icon in the Windows notification area to remove the device
before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before
connecting it. Otherwise, the device may not be recognized.
9
Chapter 1. Getting to know your computer
 Using memory cards (not supplied)
Your computer supports the following types of memory cards:
• Secure Digital (SD) card
• Secure Digital High Capacity (SDHC) card
• SD eXtended Capacity (SDXC) card
• MultiMediaCard (MMC)
Notes:
• Insert only one card in the slot at a time.
• This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Note: Before removing the memory card, disable it by using the Windows safely remove
hardware and eject media utility to avoid data corruption.
10
Chapter 1. Getting to know your computer
Right-side view ----------------------------------------------------------------------------------
a b c d ef
g
h
a Battery status
indicator
b Power button
and power
status indicator
Indicator
Battery
status
indicator
Press this button to turn on the computer.
Indicator status
Meaning
On (solid white)
The battery has more than 20% charge.
Solid amber
The battery has between 5% and 20%
charge.
Fast blinking amber
The battery has less than 5% charge.
Slow blinking amber
The battery is being charged. When
battery charge reaches 20%, the blinking
color changes to white.
Slow blinking white
The battery has between 20% and 80%
charge and is still charging. When the
battery reaches 80% charge the light will
stop blinking, but charging will continue
until the battery is fully charged.
On (solid white)
The computer is powered on.
Power status
Blinking
indicator
Off
The computer is in sleep mode.
The computer is powered off.
11
Chapter 1. Getting to know your computer
c Novo button
When the computer is off, press this button to start the
Lenovo OneKey Recovery system or the BIOS setup utility,
or to enter the boot menu.
d Rotation lock
button
Keeps the screen locked in portrait or landscape orientation.
Locking the screen rotation will disable the gravity sensing
function, thereby preventing the screen from changing its
orientation automatically depending upon the angle at
which it is held.
Note: The screen rotation lock button will be disabled in notebook mode.
e Volume down
button
Decreases the volume level.
f Volume up button Increases the volume level.
g Micro HDMI port
Connects to devices with micro HDMI input such as a TV or
an external display.
h USB 3.0 port
Connects to USB devices.
Note: For details, see “Connecting USB devices” on page 9.
12
Chapter 1. Getting to know your computer
 Screen orientation
You can rotate the display panel to your preferred orientation.
• The orientation of the display automatically changes (alternating between
portrait and landscape modes) depending upon how you hold the
computer.
Landscape
Portrait
• To prevent automatic orientation, press the rotation lock button. It is located
on the right edge of the computer (See illustration below).
Note: The screen rotation lock button will be disabled in notebook mode.
13
Chapter 1. Getting to know your computer
Bottom view -----------------------------------------------------------------------------------------a
b
a Ventilation slots
Allow air to enter the computer for cooling.
b Speakers
Provide audio output.
14
Chapter 2. Starting to use Windows 10
Configuring the operating system for
the first time ---------------------------------------------------------------------------------------------------------You may need to configure the operating system when it is first used.
The configuration process may include the procedures below:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account
Operating system interfaces -----------------------------------------------------------Windows 10 comes with a powerful and useful start menu.
To open the start menu, do one of the following:
• Press the Windows button
• Press the Windows key
• Select Start
.
on the keyboard.
on the lower-left corner of the desktop.
1
2
3
4
5
6
7
a Get Started app
b Settings button
e Start button
f Search box
c Power button
d All apps button
g Task view button
15
Chapter 2. Starting to use Windows 10
 Settings
Settings lets you perform basic tasks. You can also search for more settings
with the settings search box in the upper-right corner.
To open the settings, do the following:
• Open the start menu, and then select Settings
.
 Personalize the start menu
You can personalize the start menu with your favorite apps.
To personalize the start menu, do the following:
1 Open the start menu, and then select All apps
to display the apps list.
2 Right click the app you want to add to the start menu, and then select Pin
to Start.
Note: You can also drag apps from the Most used or All apps columns to add them to the start
menu.
16
Chapter 2. Starting to use Windows 10
Putting the computer to sleep or
shutting it down -----------------------------------------------------------------------------------------------When you have finished working with your computer, you can put it to sleep
or shut it down.
 Putting your computer to sleep
If you will be away from your computer for only a short time, put the
computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use,
bypassing the startup process.
To put the computer to sleep, do one of the following:
• Close the display lid.
• Press the Power button.
• Open the start menu, and then select Power
Sleep.
Note: Wait until the power indicator light starts blinking (indicating that the computer is in
sleep mode) before you move your computer. Moving your computer while the hard
disk is spinning can damage the hard disk, causing loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard. (Notebook mode only)
• Press the Power button.
• Press the Windows button
.
17
Chapter 2. Starting to use Windows 10
 Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down the computer, do one of the following:
• Open the start menu, and then select Power
Shut down.
• Press and hold or right-click the Start button in the lower-left corner and
select Shut down or sign out Shut down.
18
Chapter 2. Starting to use Windows 10
Task and desktop management --------------------------------------------------- Task view
To open the task view, do one of the following:
• Select the Task view button
on the task bar.
• Press the Windows key
+ Tab.
• Swiping in from the left edge of the screen.
 Virtual desktop management
Windows 10 supports the ability to create, manage and switch between
virtual desktops.
To create a new virtual desktop, do one of the following:
• Open the task view, and then select New desktop.
• Press the Windows key
+ Ctrl + D.
To switch between different desktops, do one of the following:
• Open the task view and select the desktop you want active.
• Press the Windows key
you’ve created.
+ Ctrl +
/
to scroll through the desktops
19
Chapter 2. Starting to use Windows 10
Connecting to a wireless network -------------------------------------------Enabling wireless connection
To enable wireless functions, do the following:
1 Press F7 (
) to disable airplane mode.
2 Click
on the lower-right corner of the task bar to open the network
configuration page.
Connecting to a wireless network
After wireless has been enabled, the computer will automatically scan for
available wireless networks and display them in the wireless network list. To
connect to a wireless network, click the network name in the list, and then
click Connect.
Note: Some networks require a network security key or passphrase for connection. To connect
to one of those networks, ask the network administrator or the Internet service provider
(ISP) for the security key or passphrase.
Get Started app ------------------------------------------------------------------------------------------------Windows 10 also provides the Get Started app to explain the new features of
Windows 10. You can find it on the start menu.
To open the Get Started app, do one of the following:
• Open the start menu and select Get Started .
• Press Fn + F1 (depending on your keyboard layout).
20
Chapter 2. Starting to use Windows 10
Touch screen operation -------------------------------------------------------------------------The display panel can accept inputs like a tablet, using the multi-touch
screen, or like a traditional notebook computer, using the keyboard and
touchpad.
 Multi-touch gestures
You can touch the screen with one or more fingertips to perform a variety of
tasks.
Frequently used gestures
Tasks performed
Tap
Tap once on an item.
Performs an action, such as starting an
app, opening a link, or performing a
command. Similar to left-clicking with
a mouse.
Press and hold
Press your finger down and leave it there
for a moment.
Enables you to see detailed
information before selecting an action.
Can also open a menu with more
options. Similar to right-clicking with
a mouse.
21
Chapter 2. Starting to use Windows 10
(continued)
Frequently used gestures
Tasks performed
Zoom
Move two fingers together or apart while
touching the screen.
Zooms in and out on visual apps, such
as pictures and maps. Can also jump to
the beginning or end of a list.
Rotate
Place two or more fingers on an item and
then turn your hand.
Rotates an object (Note: Not all items
can be rotated, depending upon the
app.).
Slide
Drag your finger across the screen.
Pans or scrolls through lists and pages.
Can also move an object or be used to
draw or write, depending upon the
app. Similar to pressing and holding to
pan and to scrolling with a mouse.
22
Chapter 2. Starting to use Windows 10
(continued)
Frequently used gestures
Tasks performed
Swipe
Start from left/right edge of the screen,
then swipe inwards toward the center.
Swiping in from the left edge of the
screen can open the task view.
Swiping in from the right edge of the
screen displays the action center.
23
Chapter 3. Lenovo OneKey Recovery system
The Lenovo OneKey Recovery system is software designed to back up and
restore your computer. You can use it to restore the system partition to its
original status in case of a system failure. You can also create user backups
for easy restoration as required.
Notes:
• If your computer is preinstalled with a GNU/Linux operating system, OneKey Recovery
system is not available.
• To utilize the features of the OneKey Recovery system, your hard disk already includes a
hidden partition by default to store the system image file and the OneKey Recovery
system program files. This default partition is hidden for security reasons, which explains
why the available disk space is less than the stated capacity.
 Backing up the system partition
You can back up the system partition to an image file. This image file can be
used to restore the system partition. To back up the system partition:
1 In Windows, press the Novo button or double-click OneKey Recovery
icon to start the Lenovo OneKey Recovery system.
2 Click System Backup.
3 Select a back-up location and click Next to start the backup.
Notes:
• You can choose a back-up location on the local hard disk drive or an external storage
device.
• Remove the removable hard disk drive before starting the Lenovo OneKey Recovery
system. Otherwise, data from the removable hard disk drive might be lost.
• The back-up process may take a while.
• The back-up process is only available when Windows can be started normally.
24
Chapter 3. Lenovo OneKey Recovery system
 Restoring
You can choose to restore the system partition to its original status or to a
previously created back-up point. To restore the system partition:
1 In Windows, press the Novo button or double-click OneKey Recovery
icon to start the Lenovo OneKey Recovery system.
2 Click System Recovery. The computer will restart to the recovery
environment.
3 Follow the on-screen instructions to restore the system partition to its
original status or to a previously created back-up point.
Notes:
• The recovery process is irreversible. Make sure to back up any data you wish to save on
the system partition before starting the recovery process.
• The recovery process may take a while. So be sure to connect the AC power adapter to
your computer during the recovery process.
• The above instructions should be followed when Windows can be started normally.
If Windows cannot be started, then follow the steps below to start the Lenovo
OneKey Recovery system:
1 Shut down the computer.
2 Press the Novo button. From the Novo Button Menu, select System
recovery and press Enter.
25
Chapter 4. Troubleshooting
Frequently asked questions ----------------------------------------------------------This section lists frequently asked questions by category.
 Finding information
What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your
computer contains safety precautions for using your computer. Read and
follow all the precautions when using your computer.
Where can I find the hardware specifications for my computer?
You can find hardware specification for your computer on the printed
flyers which came with your computer.
Where can I find warranty information?
For detailed warranty information on this machine, please visit below
website to check out: support.lenovo.com/warrantystatus.
 Drivers and preinstalled software
Where are the installation discs for Lenovo preinstalled software (desktop
software)?
Your computer did not come with installation discs for Lenovo preinstalled
software. If you need to reinstall any preinstalled software, you can find
the installation program on the C partition of your hard disk. If you cannot
find the installation program there, you can also download it from the
Lenovo consumer support website.
Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, Lenovo
provides drivers for all the hardware devices that you need on the C
partition of your hard disk. You can also download the latest device drivers
from the Lenovo consumer support website.
26
Chapter 4. Troubleshooting
 Lenovo OneKey Recovery system
Where are the recovery discs?
Your computer did not come with recovery discs. Use the Lenovo OneKey
Recovery system if you need to restore the system to its factory status.
What can I do if the back-up process fails?
If you can start the backup but it fails during the back-up process, try the
following steps:
1 Close all open programs, and then restart the back-up process.
2 Check to see if the destination media is damaged. Select another path
and then try again.
When do I need to restore the system to its factory status?
Use this feature when the operating system fails to start up. If there is
critical data on the system partition, back it up before starting recovery.
 BIOS setup utility
What is the BIOS setup utility?
The BIOS setup utility is ROM-based software. It displays basic computer
information and provides options for setting boot devices, security,
hardware mode, and other preferences.
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup.
 Getting help
How can I contact the customer support center?
See “Chapter 3. Getting help and service” in the Lenovo Safety and General
Information Guide.
27
Chapter 4. Troubleshooting
Troubleshooting -----------------------------------------------------------------------------------Display problems
When I turn on the
computer, nothing appears
on the screen.
• If the screen is blank, make sure that:
- The AC power adapter is connected to the
computer, and the power cord is plugged into a
working electrical outlet.
- The computer power is on. Press the Power button
again for confirmation.
• If these items are set correctly, and the screen remains
blank, have the computer serviced.
When I turn on the
computer, only a white
cursor appears on a blank
screen.
• Restore backed-up files to your Windows
environment or the entire contents of your hard disk
to its original factory contents using the Lenovo
OneKey Recovery system. If you still see only the
cursor on the screen, have the computer serviced.
The screen goes blank
while the computer is on.
• Your power management is enabled. Do one of the
following to resume from sleep mode:
- Press any key on the keyboard. (Notebook mode
only)
- Press the Power button.
- Press the Windows button.
- Press F9 (
) to confirm whether the backlight of
the LCD screen has been turned off.
Sleep problems
The critical low-battery error
message appears, and the
computer immediately turns
off.
• The battery power is getting low. Connect the AC
power adapter to the computer.
The computer enters sleep
mode immediately after
Power-on.
• Make sure that:
- The battery is charged.
- The operating temperature is within the acceptable
range. See “Chapter 2. Use and care Information” in
the Lenovo Safety and General Information Guide.
Note: If the battery is charged and the temperature is within range, have the computer
serviced.
28
Chapter 4. Troubleshooting
The computer does not
return from sleep mode and
the computer does not
work.
• If your computer is in sleep mode, connect the AC
power adapter to the computer, then press the
Windows button or the Power button.
• If the system still does not return from sleep mode,
your system has stopped responding, and you cannot
turn off the computer; reset the computer. Unsaved
data may be lost. To reset the computer, press and
hold the Power button for eight seconds or more. If
the computer still does not reset, remove the AC
power adapter.
Display panel problems
The screen is blank.
• Do the following:
- If you are using the AC power adapter or the
battery, and the battery status indicator is on, press
F12 (
) to make the screen brighter.
- If the power indicator is blinking, press the Power
button to resume from sleep mode.
- Press F9 (
) to confirm whether the backlight of
the LCD screen has been turned off.
- If the problem persists, follow the solution in the
next problem “The screen is unreadable or
distorted.”
The screen is unreadable or
distorted.
• Make sure that:
- The screen resolution and color quality are correctly
set.
- The monitor type is correct.
Incorrect characters appear
on the screen.
• Is the operating system or programs installed
correctly? If they are installed and configured
correctly, have the computer serviced.
Sound problems
No sound can be heard
from the speakers even
when the volume is turned
up.
• Make sure that:
- The Mute function is off.
- The combo audio jack is not being used.
- Speakers are selected as the playback device.
29
Chapter 4. Troubleshooting
Battery problems
Your computer shuts down
before the battery status
indicator shows empty.
-orYour computer operates
after the battery status
indicator shows empty.
• Recharge the battery.
Other problems
30
Your computer does not
respond.
• To turn off your computer, press and hold the Power
button for eight seconds or more. If the computer still
does not respond, remove the AC power adapter.
• Your computer might lock when it enters sleep mode
during a communication operation. Disable the sleep
timer when you are working on the network.
The connected external
device does not work.
• Do not connect or disconnect any external device
cables other than USB while the computer power is
on. Otherwise, you might damage your computer.
• When using high power consumption external
devices, such as an external USB optical disk drive,
use an external device power adapter. Otherwise, the
device may not be recognized, or the system may
shut down as a result.
Trademarks
The following terms are trademarks or registered trademarks of Lenovo in the
United States, other countries, or both.
Lenovo
OneKey
Microsoft and Windows are trademarks of Microsoft Corporation in the United
States, other countries, or both.
Other company, products, or service names may be trademarks or service marks
of others.
31
©Lenovo China 2015
en-US
Rev. RP01