Leica ScanStation Pxx Remote Control via Leica CS35

Leica ScanStation Pxx
Remote Control via Leica CS35
v1.0
Leica ScanStation Pxx
Remote Control via Leica CS35
Content
 Prerequisite
 WiFi settings on scanner
 WiFi settings on tablet
 RDP connection on tablet
 Pxx Simulator on tablet
 Pxx Data Copy Tool on tablet
2
Leica ScanStation Pxx
Remote Control via Leica CS35
Prerequisite
 Leica ScanStation Pxx with FW
2.xx or higher installed
 Leica CS35 tablet computer
 No additional external hardware
needed
3
Leica ScanStation Pxx
Remote Control via Leica CS35
Select WiFi settings on scanner
 Start the Leica ScanStation Pxx
and wait for the boot process to
finish.
 Select
Status to get to the
Status Menu.
 In the Status Menu select
Connections to open the WiFi
Configuration menu.
4
Leica ScanStation Pxx
Remote Control via Leica CS35
Select WiFi settings on scanner
cont’d
 In the Wifi Configuration menu
set
 WiFi Operation = On
 WiFi Connection = Access point
mode
 Press Set to confirm these
settings. Wait for the information
line to change from Enabling
WiFi… to Ready.
 Check that the WiFi icon in the
status bar changed from off
to on .
 Press Cont to return to the Status
Menu.
5
Leica ScanStation Pxx
Remote Control via Leica CS35
Select WiFi settings on tablet
 Press the network icon
open the Networks page
to
 In the list of visible WiFi networks
select Pxx_185xxxx with 185xxxx
being the scanner‘s serial
number.
6
Leica ScanStation Pxx
Remote Control via Leica CS35
Select WiFi settings on tablet
cont’d
 Connect to Pxx_185xxxx
 Leave the WiFi page once
connection to Pxx_185xxxx has
been established
7
Leica ScanStation Pxx
Remote Control via Leica CS35
Create RDP connection on tablet
 In the Apps menu select the
Remote Desktop Connection app
 In the Remote Desktop
Connection app
create a
connection with
 Computer = PXX-185xxxx
 User name = sbc
8
Leica ScanStation Pxx
Remote Control via Leica CS35
Create RDP connection on tablet
cont’d
 Connect via the Remote Desktop
Connection app to the scanner
 Use the virtual keyboard
enter the password
9
to
Leica ScanStation Pxx
Remote Control via Leica CS35
Create RDP connection on tablet
cont’d
 Enter the password «sbc»
 Once connection has been
established use the scanner MMI
in the Remote Desktop
Connection window to control the
scanner remotely
10
Leica ScanStation Pxx
Remote Control via Leica CS35
Pxx Simulator
 Install the free tool Pxx Simulator
on the tablet and start it by
double-clicking on Start Pxx
Simulator
 In Scan Devices window select a
scanner from the list of found
instruments and press Connect
11
Leica ScanStation Pxx
Remote Control via Leica CS35
Pxx Simulator cont’d
 Once connection has been
established use the scanner MMI
to control the scanner remotely
12
Leica ScanStation Pxx
Remote Control via Leica CS35
Pxx Data Copy Tool
 Install the free Pxx Data Copy
Tool on the tablet and start it by
double-clicking on Pxx DataCopy
 In Pxx Data Copy window press
the Scanner button
13
Leica ScanStation Pxx
Remote Control via Leica CS35
Pxx Data Copy Tool cont’d
 Select a scanner from the list of
found instruments and press OK
 Once connection has been
established browse in the
hierarchy tree to the element to
be displayed or copied
 It is not recommended to transfer
large volume datasets via a WiFi
connection due to the limited
bandwith, better use a cable
connection in this case.
14