MSA-210 - MPB srl

MPB S.r.l.
Via Giacomo Peroni 400/402
00131 ROMA (RM)
Tel +39 0641200744
Fax +39 0641200653
info@gruppompb.com
http://www.gruppompb.uk.com/
User Manual
MSA-210
Spherical metal antenna for the
evaluation of human exposure to
electromagnetic fields.
Manual Version:
V1.3
User Manual
MSA-210
SAFETY NOTES
Before using the product please read carefully the following.
MPB works to provide its customers with the best safety conditions available,
complying with the current safety standards. The instrumentation described in this
manual has been produced and tested in conditions that fully comply with the
European standards. To maintain these conditions please carefully follow this
manual. This product is intended for industrial environments and laboratories and
should be used by authorized personnel only. MPB disclaims any responsibility for
different uses of the device.
Disposal
When this product will become obsolete, it must be disposed according to local
regulations. This product complies with the European WEEE (2002/96/EC) and
belongs to the category number 9 (monitoring and control instruments). Disposal
should be made in an appropriate place or in a local waste collection center.
-2-
User Manual
MSA-210
D e c l a r a t i o n of C o n f or m i t y
(according to EMC 89/336/EEC directives and low voltage 73/23/EEC)
This document certificates that the metal antenna mod. MSA-210 with P-0003
protection network:
They comply with the following European standards:
Safety: CEI EN 61010-1 (undated reference, applies to all editions)
EMC: EN 61326-1 (undated reference, applies to all editions)
This product complies with the 2006/95/CE Low voltage directive requirements
and with EMC 2004/108/CE directive
MPB S.r.l.
-3-
User Manual
MSA-210
Index
1. General Information
1.1. Description
1.2. System Composition
1.3. Optional Accessories
1.4. Protection Network model P-0003
1.5. Mounting and Connection to the EMI
Receiver
1.6. Example of Mounting the test head in Vertical
Position.
1.7. Example of Mounting the test head in
Horizontal Position.
1.8. Technical Specifications
2. Use and Operation of the System
2.1. Vertical Measurements
2.2. Horizontal Measurements
2.3. EMI Receiver Measurements
3. Use and Operation of the Software
3.1 Calculation Software model P-0008
-4-
Pag.
5
6
7
8
9
10
11
11
12
13
13
15
User Manual
MSA-210
1. General Information
1.1. Description
MSA-210 is a system that complies with the IEC 62493 regulation, made for the
evaluation of lighting appliances regarding the human exposure to electromagnetic
fields
MSA-210 Metal antenna with P-0003 protection network and insulating rod from NMR-01
tripod
-5-
User Manual
MSA-210
1.2. System Composition
 Test Head (Van Der Hoofden) with soft bag
 P-0003 Protection network
 30 cm connection cable (with M3 screw)
 P-0003 Calibration Certificate
 USB key including user manual and P-0008 calculation program
If the shipping container has been damaged, please immediately notify the
problem to the courier and keep all the parts of the package as a proof of your
claim. If you find signs of damage on the equipment, do not proceed with the
installation because it has to be returned to MPB or to its agent. Please check
that the instrumentation is complete according to the list above.
-6-
User Manual
MSA-210
1.3. Optional Accessories
P-0007
Support for horizontal position with a “T” junction (including: 79 cm
telescopic rod, NMR-BLK, NMR-ARJ)
NMR-01
Height adjustable non-magnetic and non-reflective fiberglass tripod
complete with soft bag
-7-
User Manual
MSA-210
1.4. Protection Network model P-0003
The protection network complies with IEC 62493:
Where: C1=470 pF; C2=10 nF; C3= chosen in calibration; R1=470 Ω; R2=150 Ω;
D=diodi schottky.
The protection network has the following characteristic curve
-8-
User Manual
MSA-210
1.5. Mounting and Connection to the EMI Receiver
Screw the test head to the telescopic rod of the tripod (for vertical measurements) or
to the telescopic rod with a “T” junction mod. P-0007 (for horizontal measurements).
Attach the 30cm cable to the protection network, on the test head side
Attach the protection network to the support rod, with slight pressure on the elastic
hook.
-9-
User Manual
MSA-210
Fix the eyelet to the N-male wired connector with the supplied M3 screw to the
metal support of the test head.
1.6. Example of Mounting the Test Head in Vertical Position
- 10 -
User Manual
MSA-210
1.7. Example of Mounting the Test Head in Horizontal Position
Caution: in order to avoid the overturning of the tripod given to the weight of the test head,
make sure that the two first extension elements of the legs are open and that the T junction
mod. P-0007 is mounted as in the picture.
1.8. Technical Specifications
MSA-210 Test Head
Frequency
20 kHz – 10 MHz
Test head size
210 ± 5 mm
Weight
2,2 kg
Telescopic rod
attachment
¼”
Protection Network P-0003
R.O.S. Test head port 1,5 ± 0,2
- 11 -
User Manual
MSA-210
R.O.S. Receiver port
1,0 ± 0,2
Test head
connector
side
N female
Receiver connector
side
N female
Operating temperature -10…+50 °C
Technical specifications are subject to change without notice
2. Use and Operation of the System
2.1. Vertical Measurements
Mount the MSA-210 on a tripod and align the test head vertically to the device that
has to be tested according to the IEC 62493 regulation.
E.g.: distance for an instrument recessed into the ceiling with a fluorescent lamp and
power ≤180 W = 50 cm.
- 12 -
User Manual
MSA-210
2.2. Horizontal Measurements
Align the metal test head vertically to the device that has to be tested according to
the IEC 62493 regulation.
E.g.: distance for a table lighting instrument = 30 cm.
2.3. EMI Receiver Measurements
Connect the MSA-210 measurement system to the EMI receiver, using a coaxial cable
according to the IEC 62493. Set the EMI receiver for a measurement of peak voltage
(dBµV):
Frequency
9kHz – 150kHz
150kHz – 10MHz
B6 second
Measuring time
CISPR 16-1-1
200Hz
100 ms
9kHz
20 ms
F step
sensor
222Hz
10kHz
Peak
Peak
- 13 -
User Manual
MSA-210
The MSA-210 equipment is used for the measurement of the current density induced by the
electromagnetic field emitted by the device that is being tested. Follow the verification
method specified in IEC 62493 D and E appendices; The device under test complies with
IEC 62493 if F≤0,85 where F is represented by the formula E.4
- 14 -
User Manual
MSA-210
3. Use and Operation of the Software
3.1. Calculation Software model P-0008
Use the calculation program for a simple and quick evaluation of the parameter F :





Insert the general data and the conditions of the test in the first page.
Insert in the column f= the frequency values (Hz) of the measurement made with the
receiver.
Insert in the column V the voltage values (dBμV) of the measurement made with the
receiver.
You can repeat the previous operations for two more measurements (in case of
different positions of the antenna).
Calculations in accordance with IEC 62493:2009. In the column marked with F (first
page) will appear the value of the F parameter: if F≤0,85 the result will be
“POSITIVE”, if F>0,85 the result will be “NEGATIVE”.
E.g.:
- 15 -
User Manual
MSA-210
For further information: www.gruppompb.uk.com
For technical information: assistenza@gruppompb.com
Tel. + 39 06 41200744
- 16 -
Download PDF
Similar pages
AEG DF6164-M
T'nB FTDC034873 tripod
This File, 15kb
König KN-TRIPOD11N tripod
Laser Levels
Tiffen Magnum X3T User's Manual
3M PS TR60 Product Sheet
König HAV-PR10
MBP8
T'nB ACDI033654 tripod