Velocitykvm-35WR Complete Steps 1-8 to connect the Extenders: Multi-Mode Fiber Extension System – Three Redundant DVI Displays 6 QUICK START GUIDE Optional Local USB HID or PS2 Keyboard/Mouse Velocity-35WR Redundant KVM Transmitter USB HID & USB 2.0 VEL-WR0M35-LCTX 5 4 STEP 3: Connect the destination DVI and KVM devices to the VelocityKVM Receiver using standard copper cables. Ensure the devices are turned ON. STEP 4: Ensure that the POWER ON/OFF switch is in the OFF position (0) on the Tx unit. Connect the supplied AC Power Cord and plug it into a standard AC supply. Turn the switch ON (1). Velocity-35WR Redundant KVM Receiver USB HID & USB 2.0 VEL-WR0M35-LCRX 3 Fiber-Optic Cables: L1: Data Tx to Rx and Video 1 L2: Data Rx to Tx L3: Video 2 L4: Video 3 L1': Redundant Data Tx to Rx and Video 1 L2': Redundant Data Rx to Tx L3': Redundant Video 2 L4': Redundant Video 3 STEP 2: Ensure that the POWER ON/OFF switch is in the OFF position (0) on the Rx unit. Connect the supplied AC Power Cord and plug it into a standard AC supply. Turn the switch ON (1). 2 1 STEP 1: Connect 8 Multi-Mode Fiber-Optic Cables between the Transmitter and Receiver units (up to 1000 meters) as shown. STEP 5: Connect the DVI and KVM cables between the Source CPU and the VelocityKVM Transmitter using the cables supplied in KIT-000005-R. Ensure the CPU is turned ON. STEP 6: If desired, connect an optional local keyboard & mouse at the VelocityKVM Transmitter’s PS/2 or USB HID local device ports. Ensure all system functions are operating properly. RACK-MOUNT OR DESK-TOP OPTIONS: Like all Thinklogical® KVM extenders, the Velocitykvm-35 can be mounted in a standard EIA 19" rack or on a shelf or desk-top. 8 Mounting Bracket Screws Velocitykv m-35 Thr ee DV I Di spl ays Fi ber O pt ic Tr ans mi t ter USB HID or PS2 Keyboard/Mouse thinklogical® Mic IN VELOCITY-35WR_Quick_Start_Rev_A PHONE: WEBSITE: EMAIL: 1-800-291-3211 www.thinklogical.com firstname.lastname@example.org Visit us online at www.thinklogical.com for more product information, firmware updates and the complete line of Thinklogical ® products. 2 Mounting bracket screws in four places. After removing power from the unit, each mounting bracket, which is secured by four screws, can be safely removed for desk-top mounting without removing the cover. All screws should be reinstalled after the brackets have been removed. Copyright © 2017. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.