Xtreme/GbE - Tusk Embedded Technologies

GbE Managed
SWITCH
Xtreme/GbE
Managed Carrier Ethernet Switch
Product Name: Xtreme/GbE
Managed Carrier Ethernet Switch
Part Numbers: XDG004, XDG005, XDG006,
XDG007, XDG008, XDG009
Connect Tech’s Xtreme/GbE Managed Carrier Ethernet Switch provides
Carrier Grade Ethernet switching capabilities in an extremely small
embedded form factor.
Excellent for high-end applications such as Mobile and Microwave
backhaul, the Xtreme/GbE Managed Carrier Ethernet Switch is also a highly
reliable way to communicate with 10/100/1000 devices in an embedded
system. Powered by the latest generation Carrier Ethernet Switch engine
the Vitesse VSC7428. Its embedded 416 MHz MIPS 32-bit CPU, 1Gb DDR2
external memory and DMA-based frame extraction and insertion supports
timing over packet, Ethernet OAM, and performance monitoring.
XDG006
Available in models with RJ-45 or Rugged Positive Locking Headers,
making this embedded Ethernet switch ideal for any type of environment.
Hardware Specifications
Ethernet Switch Engine Vitesse VSC7428 Carrier Grade Ethernet Switch Chipset
A powerful embedded 416 MHz RISC 32-bit CPU with DDR2 external
memory and DMA-based frame extraction and insertion supports
timing over packet, Ethernet OAM, and performance monitoring.
Memories
1Gb DDR2 SDRAM
128Mb Serial NOR Flash
Ports 8 x Gigabit Ethernet (10/100/1000 Mbps)
Connectors (PC Type and Rugged Type) 8 x Low Profile RJ-45 (XDG004, XDG005, XDG006)
8 x Rugged Positive Locking Headers (XDG007, XDG008, XDG009)
Layer 2 Switching
802.1Q VLAN switch with 8K MACs and 4K VLANs
Push/pop up to two VLAN tags
IPv4/IPv6 multicast
Policing with storm control and MC/BC protection
RSTP and MSTP support
Hardware and software-based learning
Link aggregation (IEEE 802.3ad)
Independent and shared VLAN learning (IVL, SVL)
Jumbo frame support
Management Access
Web Interface
RS-232 Serial Interface (CLI)
Software API
PCIe/104 Bus
Indicator LEDs
2 LEDs per port (available on RJ-45 and through external connector)
Power Rail LEDs
Status LEDs
Standalone Operation
Switch can be used as a standalone unit OR it can be paired with an
embedded SBC.
Input Voltage
Wide input rage: +9V to +36V DC with Reverse Polarity Protection
Can be powered from external connector OR directly from expansion bus
Power Consumption
Idle: 0.3A, 3.6W Typical: 0.35A, 4.2W Max: 0.5A, 6W (with +12V input)
Bus Interface
no bus connector populated
PC/104 bus pass through (for sourcing power only)
PCIe/104 bus (sourcing power and management interface)
Dimensions
PC/104 compliant: 3.775” x 3.550”
Tallest Top Side Component: Heatsink 0.375” (9.5mm)
Operating Temp -40°C to +85°C (chipset rated to +125°C thermals)
Warranty and Support
Lifetime Warranty and Free Technical Support
Specifications subject to change without notice.
©2012, Connect Tech Inc. All trademarks are property of their respective holder.
XDG009
FEATURES
8 x Gigabit Ethernet
(10/100/1000 Mbps )
Carrier Grade Ethernet Switching
 Small PC/104 Form Factor
 Single Wide Range Input Voltage
+9V to +36V DC
Extended Temperature Range
-40°C to +85°C
CTIX-00110.0.00 - 11.13.13
GbE Managed
SWITCH
Xtreme/GbE
Managed Carrier Ethernet Switch
Software Specifications
Software Specifications Continued
Port control
SynchronizationSNTP & client
Power Saving Cold start
Cool start
ActiPHY
PerfectReach
EEE Power Management
LED Power Management
Thermal Protection
Management DHCP Client
HTTP Server
CLI - Console Port
Industrial Standard CLI
Industrial Standard Configuration
Management access filtering
HTTPS
System Syslog
Software Upload via web
SNMP v1 / v2c / v3 Agent
SNMP multiple trap destinations
IEEE 802.1AB-2005 Link Layer Discovery – LLDP
Configuration Download/Upload - XML
Configuration Download/Upload - Industrial Standard
Loop detection restore to default
Symbolic Register Access
MIBs
RFC 1213 MIB II
RFC 1215 TRAPS MIB
RFC 4188 Bridge MIB
RFC 3635 Ethernet-like MIB
RFC 3411 SNMP Management Frameworks
IEEE 802.1 MSTP MIB
IEEE 802.1AB LLDP-MIB (LLDP MIB included in a clause of the STD)
RFC 3621 LLDP-MED Power (POE) (No specific MIB for POE+ exists)
Private MIB framework
QoS
L2 Switching
L3 Switching
Security
Port Speed/Duplex Mode/Flow Ctrl
Port Frame Size (Jumbo frames)
Port State (administrative status)
Port Status (link monitoring)
Port Statistics (MIB counters)
Port VeriPHY (cable diagnostics)
Traffic Classes (8 active priorities)
Port Default Priority
QoS User Priority
Input priority mapping
QoS Control List (QCL Mode)
Storm Control for UC, MC and BC
Port policers
Global/VCAP (ACL) policers
Port egress shaper
Queue egress shapers
TRTCM (two rate three color market)
Scheduler mode (Strict or Weighted Fair Queuing)
Auto MAC addr. Learning/Ageing
MAC Addresses – Static
Virtual LAN
Private VLAN – Static
Port Isolation – Static
IEEE-802.1ad Provider Bridge (Native or Translated VLAN)
Rapid Spanning tree – RSTP, STP
Loop Guard
Link Aggregation – Static
Link Aggregation – LACP
IGMPv2 snooping
Port Mirroring (Ingress and Egress Mirroring)
IPv4 Unicast: RIPv1/RIPv2
Port-Based 802.1X
Multiple 802.1X
Web & CLI Authentication
ACLs for filtering/policing/port copy
Specifications subject to change without notice.
©2012, Connect Tech Inc. All trademarks are property of their respective holder.
Part Number
Description
XDG004
Standalone RJ-45 Model
XDG005
PC/104 RJ-45 Model
XDG006
PCIe/104 RJ-45 Model
XDG007
Standalone Rugged Locking Model
XDG008
PC/104 Rugged Locking Model
XDG009
PCIe/104 Rugged Locking Model
CKG019
Ruggedized Cable Kit for XDG007/8/9
Connect Tech Inc.
42 Arrow Road, Guelph ON Canada
Tel: 519.836.1291 Fax: 519.836.4878
Toll: 800.426.8979 (North America)
Email: sales@connecttech.com
www.connecttech.com
CTIX-00109.0.00 - 04.06.13