Facilitating Secure Communications in Harsh Environments
Magnum
EMI Hardened
801 Series
Size 8 Cavity Optoelectronic PCB Insert,
1.25mm, 850nM - ARINC 801, 803 & 804
Compliant
Front Release Optical Transmitter Insert
FEATURES
• Compliant with Arinc 664, 801, 803, 804 & 818,
• Suitable for Fast Ethernet, Gigabit Ethernet and 1x/2x/4xFibre
Channel and sFPDP applications from 0.1Gbps to 2.5Gbps
• Maximum optical channel bit error rate less than 1x10-12
• Operating temperature range from -55°C to +85°C
• Shock and vibration resistant per RTCA / D0-160E
• Arcap contact insert material meets stringent EMI / RFI / ESD
& EMP performance specifications
• Six pin PCB footprint with TX_Fault and TX_DIs functions
• 1.25mm ceramic optical fiber ferrule connector interface
per ARINC 801
• Compatible with Arinc 600 or MIL-STD-83527 size 8Q
(Quadrax) insert cavities
APPLICATIONS
Magnum - 801 series printed circuit board mounted optical
transmitters enable high speed network communications
over long distances in harsh environments.
• Fast or Gigabit Ethernet switches and peripherals
• Fibre Channel switches and peripherals
• Serial Rapid I/O (sRIO) interfaces
• Video displays
This size 8 Optoelectronic cavity insert provides a rugged
optical interface that is compliant with ARINC 801 1.25mm
ceramic optical ferrules.
The multimode optical fiber interface supports applications
where copper cable link distance, bandwidth, weight
or bulk make the use of twisted pair, twinax or quadrax
copper conductors unacceptable.
US Pat. #7,690,849
ARINC 801 / 1.25mm Ferrule / PCB Mounted
DESCRIPTION
Magnum - 801 series Optoelectronic size 8 cavity PCB insert
transmitters consist of optoelectronic transmitter functions
integrated into a printed circuit board mounted pin contact. The
optical transmitters are 850nm VCSEL lasers. The transmitter
input lines are driven with differential CML signals applied to
the transmitter (TX+ and TX-) lines. Dual loop, temperature
compensated, VCSEL drivers convert the transmitter input
signals to suitable VCSEL bias and modulation currents.
The TX_Fault circuit disables the optical transmitter output
when the optical output power or internal current exceeds
predefined limits. The fault condition is latched until reset by
a toggle of TX_Dis or VCC. A CMOS fault signal is generated
on the TX_Fault line upon a transmitter optical or electrical
fault condition.
The optical mating interface to the Magnum - 801 series
size 8 cavity insert optical transmitters is a 1.25mm
ceramic fiber optic receptacle per ARINC 801. The
receptacle incorporates a ferrule stub with a 50/125μ
multimode optical fiber enabling it to interface to either
62.5/125μ or 50/125μ optical fiber cable.
The electrical interface to the Magnum - 801 series size
8 cavity insert optical transmitters is a six position pin
header suitable for thru-hole soldering to a flexible or rigid
printed circuit.
Magnum - 801 series size 8 cavity insert optical transmitters
are vibration isolated, environmentally hardened components
designed for use in harsh environment applications.
ORDERING INFORMATION
Application
0.1Gbps to 2.5Gbps
Part Number
P44F-TS1D-LK-EMI
P44F-TS1D-LK-EMI - April 10, 2015 - Released
4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infoMP@moog.com Web: www.protokraft.com
1
Facilitating Secure Communications in Harsh Environments
Magnum Series, EMI, 1.25mm Ferrule, Size 8 Cavity Insert, Optical Transmitter,
Multimode, 850nM, Compliant with ARINC 664, 818, 801, 803 & 804
ABSOLUTE MAXIMUM RATINGS
Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods,
provided each limiting parameter is in isolation and all other parameters have values within the performance specification. It should
not be assumed that limiting values of more than one parameter can be applied to the product at the same time.
Parameter
Symbol
Minimum
Typical
Maximum
Unit
Storage Temperature
TS
-55
+100
°C
Supply Voltage
VCC
-0.5
+4.5
V
TX_DIS Input Voltage
VI
-0.5
VCC+ 0.5
V
Differential Input Voltage (p-p)
VD
2.2
V
RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Minimum
Typical
Maximum
Unit
Operating Temperature
TA
-55
+85
°C
Power Supply Voltage
VCC
+3.135
+3.465
V
TX Differential Input Voltage (p-p)
VD
0.25
Power Supply Noise (p-p)
NP
ENVIRONMENTAL OPERATING CONDITIONS
Requirement
Feature
Condition
RTCA / D0-160E
ESD
HBM
RTCA / D0-160E
Vibration
3.8g /Hz
RTCA / D0-160E
Shock
40.0g
RTCA / D0-160E
Flame Resistance
RTCA / D0-160E
Damp Heat
10 Cycles
ARINC 801
Mating Durability
500 Cycles
FDA / CDRH / IEC-825-1
Eye Safety
Class 1
MATERIALS
Item
Detail
Insert Shell
Arcap
Solder Pins
Brass
Solder Pin Plating
Gold over Nickel
Ferrule
Ceramic
Printed Circuits
Polyimide / FR-4
2
2.2
V
200
mV
Notes
2200V
43G rms
6-9mS
30 Seconds
24 Hours
<0.5dB Change
No Safety Interlocks Required
Notes
P44F-TS1D-LK-EMI - April 10, 2015 - Released
4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infoMP@moog.com Web: www.protokraft.com
2
Facilitating Secure Communications in Harsh Environments
Magnum Series, EMI, 1.25mm Ferrule, Size 8 Cavity Insert, Optical Transmitter,
Multimode, 850nM, Compliant with ARINC 664, 818, 801, 803 & 804
OPTICAL TRANSMITTERS TA = Operating Temperature Range, VCC = 3.135V to 3.465V
Parameter
Optical Output Power (BER<10 , PRBS= 2 -1)
-12
7
Optical Output Wavelength
Symbol
Minimum
Po
-6.5
λOUT
830
Spectral Width
∆λRMS
Extinction Ratio
ER
9.0
OMA
360
Optical Modulation Amplitude (p-p)
Total Contributed Jitter (PRBS= 2 -1)
7
Typical
850
Maximum
Unit
-1.0
dBm
860
nM
0.85
nM
11.0
µW
TCJ
60
pS
POWER SUPPLY CURRENT TA = Operating Temperature Range, VCC = 3.135V to 3.465V
Parameter
Symbol
Supply Current
ICCT
Minimum
Typical
Maximum
50
95
Unit
mA
P44F-TS1D-LK-EMI - April 10, 2015 - Released
4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infoMP@moog.com Web: www.protokraft.com
3
Facilitating Secure Communications in Harsh Environments
Magnum Series, EMI, 1.25mm Ferrule, Size 8 Cavity Insert, Optical Transmitter,
Multimode, 850nM, Compliant with ARINC 664, 818, 801, 803 & 804
OUTLINE DRAWING
Dimensions are shown as: inches (mm)
1
6
2
5
3
4
0.246
(6.25)
0.31
Keying Flat
(7.9)
See PCB
Mounting Details
0.103
(2.62)
0.392
(9.96)
0.219
(5.56)
0.315
(8.00)
P44F-TS1D-LK-EMI - April 10, 2015 - Released
4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infoMP@moog.com Web: www.protokraft.com
4
Facilitating Secure Communications in Harsh Environments
Magnum Series, EMI, 1.25mm Ferrule, Size 8 Cavity Insert, Optical Transmitter,
Multimode, 850nM, Compliant with ARINC 664, 818, 801, 803 & 804
Pin Number
Symbol
ELECTRICAL PIN ASSIGNMENTS
Description
Transmit Disable - Input
Logic 1: Disable Optical Output
Logic 0: Enable Optical Output
Logic Family
1
TX_DIS
CMOS
Internal 4.7KΩ pulldown
2
VCC
3
GND
4
TX_Fault
5
TX-
Transmitter Data Input
CML
6
TX+
Transmitter Data Input
CML
Power Supply
N/A
Ground
N/A
Internal TX Fault Indicator - Output
Satisfactory Operation: Logic “0” Output
Internal Fault: Logic “1” Output
Open Drain CMOS
PRINTED CIRCUIT BOARD FOOTPRINT
Dimensions are shown as: inches
PCB Hole Pattern
Mounting Side View
0.063
0.069
Ø0.030
5 Plcs
0.069
0.070
Ø0.047
P44F-TS1D-LK-EMI - April 10, 2015 - Released
4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infoMP@moog.com Web: www.protokraft.com
5
Facilitating Secure Communications in Harsh Environments
Magnum Series, EMI, 1.25mm Ferrule, Size 8 Cavity Insert, Optical Transmitter,
Multimode, 850nM, Compliant with ARINC 664, 818, 801, 803 & 804
PCB MOUNTING DETAILS
Dimensions are shown as: inches [mm]
0.522 Min. to PCB Seating Plane
[13.26]
0.26 Max.
[6.6]
0.01
0.01
[0.3] recess to [0.3] protrusion
PCB Seating Plane
0.24
0.26
to
[6.1]
[6.6]
P44F-TS1D-LK-EMI - April 10, 2015 - Released
4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infoMP@moog.com Web: www.protokraft.com
6
Facilitating Secure Communications in Harsh Environments
Magnum Series, EMI, 1.25mm Ferrule, Size 8 Cavity Insert, Optical Transmitter,
Multimode, 850nM, Compliant with ARINC 664, 818, 801, 803 & 804
APPLICATION SCHEMATIC
For Xilinx Rocket I/O Interfaces
Transmitter
FPGA
Note 1,2
Zo=50Ω
0.01µF
6
TX+
Zt=100Ω
TX-
TXP
Zo=50Ω
5
TXN
0.01µF
Vcc= 2.5 to 3.3V
Typical application schematic shown
For alternate applications or termination
techniques, please consult the Factory
4.7KΩ
TX Fault
4
TX Disable
1
Vcc
2
FPGA
Fabric
Logic
Control
LVTTL
+
0.01µF
0.1µF
Note: 1
When using controlled impedance cable
(Coaxial cable) and Pre_Emphasis,
lengths of 1.0 meter are obtainable.
Note: 2
50 Ohm impedance termination shown.
For alternate impedance requirements,
please consult the Factory.
Vcc= 3.3V
Ferrite Bead
Real Impedance
of 100Ω min.@100MHz
10.0µF
3
P44F-TS1D-LK-EMI - April 10, 2015 - Released
4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infoMP@moog.com Web: www.protokraft.com
7
Download PDF
Similar pages