S601, S602, S602M Installing Batteries / Volume

S601, S602, S602M
Installing Batteries / Volume Adjustment
INSERT
BATTERIES
HERE
Installing Batteries – S602 and S602M
1. Open the back cover with the silver latch
2. Insert 8 “C”-cell alkaline batteries in the black plastic
battery holder.
3. Place battery holder in battery slot
4. Close cover and turn megaphone “ON” to test siren,
whistle and talk volume. Keep the switch in the “OFF/
Talk” mode WARNING: the Siren or Whistle will sound
loud immediately when the switch is on siren or whistle.
INSERT
BATTERIES
HERE
Installing Batteries – S601
1. Open the back cover with the silver latch
2. Insert 8 “AA”-cell alkaline batteries in the black plastic battery carriage following diagram on megaphone.
3. Place battery carriage in battery slot
4. Close cover and turn megaphone “ON” to test siren,
whistle and talk volume. Keep the switch in the “OFF/
Talk” mode WARNING: the Siren or Whistle will sound
loud immediately when the switch is on siren or whistle.
If the sound is too loud or
screeching you need to adjust the
INTERNAL VOLUME CONTROL
Internal Volume Control - all models
1. Open the back cover with the silver latch
2. Where the letters “ADJ” are there is a
hole. Insert a small Phillips screwdriver in
the opening until you make contact with the
adjusting mechanism. Turn clockwise to increase volume and turn it counterclockwise
to decrease volume.
INSERT
BATTERIES
HERE
INTERNAL
VOLUME
CONTROL
If you need assistance, please call our toll free number and a representative will be
happy to help you with this adjustment. 1-800-267-5486