Zoom Camera EC-740-AFZ-EX-ALU/SST series

Product
DATA
Data sheet no DS0401100 | EN
2012 | R1-5
Zone 1, 2, 21, 22
CE0344
EC-740-AFZ-EX-ALU
Ex II 2 G Ex ib mb px IIC T5 Gb
Ex II 2 D Ex mb tb IIIC T89°C Db
T-amb. -40°C to +75°C
EC-740-AFZ-EX-SST
Ex II 2 G Ex ib mb px IIC T5 Gb
Ex II 2 D Ex mb tb IIIC T92°C Db
T-amb. -40°C to +65°C
Zoom Camera EC-740-AFZ-EX-ALU/SST series
R. STAHL Camera Systems GmbH
Im Gewerbegebiet Pesch 14 | D-50767 Cologne | Germany
Phone: +49 221 59 808 300
Website: www.stahl-camera.de
Technical Specifications
Zoom Camera EC-740-AFZ-EX-ALU/SST series
Article
Ex-PCB Connection Board
Article
Ex-PCB Connection Board
Article
EC-740-AFZ-EX-ALU
Article
EC-740-AFZ-EX-SST
Zoom Camera EC-740-AFZ-EX-ALU/SST series
CCD sensor Picture elements Resolution Lens Lens speed Angle of view (H) Min. working distance Min. illumination Day/Night function
S/N ratio TV system Fuse
Construction ALU Construction SST
Protection Bracket Operating temperature
Glass Weight aluminium Weight stainless steel Power input Power consumption Communication Cable Electrical parameters
Green Passport 1/4” type IT CCD (EX view HAD).
752 (H) x 582 (V) (ca. 440 000 pixels).
PAL 460 TVL (wide end).
F = 4,1 mm (wide) to 73,8 mm (tele). 216 x zoom ratio; 18 x zoom, 12 x digital. F=1,4 to F=3,0
From wide optical to tele (optical) 2,1 sec.
48° (wide) to 2,8° (tele end).
290mm (wide end), 800 mm (tele end).
0,7 Lux (F1,4 1/50 sec. PAL) 0,1 Lux (F1,4 1/3 sec. PAL).
Automatic IR Cut filter (ICR)
50 dB or more.
PAL, CVBS, 625 lines interlaced, 50 Hz, 4,43 MHz color subcarrier 1 Vtt (75 ohm).
The camera must be protected with a 315 mA-T fuse, with 1500A breaking capacity. Placed on the Ex board, see Installation manual IM0973030.
Sun cover and housing: Aluminium (AlMgSi1). Bracket and mounting parts: SST 316.
Sun cover and housing: Stainless Steel 316. Bracket and mounting parts: SST 316.
IP66/67 following IEC 60529. 1,4 Bar overpressure filled with dry nitrogen, monitored by 2 absolute sensors, long term stability 0,1%/year. Camera is also successfully tested IP69K following DIN 40050-9: camera can withstand a high pressure cleaning with water: 14-16L/min. 80°C and 100 bars flow.
Standard bracket, including bolts, nuts and washers. Suitable for mounting hanging, overhead and standing.
EC-740-AFZ-EX-ALU; T-amb. -40°C to +75°C. EC-740-AFZ-EX-SST; T-amb. -40°C to +65°C.
Chemically hardened lens glass, 7x stronger than ordinary glass, scratch proof surface, following “VII Flach-
gläser” (German std.).
3 kg (including 5 m cable).
6 kg (including 5 m cable).
24V/DC +/-10%.
Temperature <0°C (heater on): 5,6W. Temperature >0°C (heater off): 3,6 W.
RS 232 Visca protocol 9,6 Kbps or RS 232 Pelco D 9,6 Kbps
Min. cable bending radius 50mm.
Um = 30V/DC.
All materials are compliant to Green Passport requirements according IMO resolution MEPC.197(62) as adopted on July, 15th 2011 (Maritime sector: International Maritime Organization concerning the functions of the Marine Environment Protection Committee).
Ex-PCB Connection Board
Data sheet Temperature range Power input Available separately.
-40°C ... +80°C
24V/DC +/-10%
Weight
0.3 Kg
The Ex-PCB Connection Board monitors the gas-pressurised camera via an intrinsic safe circuit. Whenever the protection by pressure
fails all power is switched off and a buzzer will sound. This Ex-board may only be used in combination with the camera’s mentioned in
this datasheet to be compliant with the applicable (EX-)regulations. The board can be mounted in a 19”-rack or in an Ex-board Box.
Electrical Parameters
Camera connector
U0 = 24V+/-10%
I0 = 315mA
P0 = 7,6W
Power connector
Um= 29,5V
Ui = 24V +/-10%
Ii = 1A ; Pi = 24W
Pan & Tilt connector
U0 = 24V +/-10%
I0 = 500mA
P0 = 12W
Intrinsic Pressure sensor connector
U0 = 12V
I0 = 100mA
P0 = 1,2W
Ui = 16V
Ii = 50mA
Pi = 0,8W
C0 = 460F
L0 = 1,5mH
Li = 0
Li/Rim = 0
NOTE: The Ex certificate applies only when both EC-740-AFZ-EX-ALU / SST and the Ex-PCB Connection
Board used together.
www.stahl-camera.de
Technical Specifications
NOTE: For more installation and specification details see Installation Manual IM0973030
Optional configurations
A
OPTIONAL
Display 7”
Ex-PCB
Set Ex
board Connection
Plate Art. noBoard
0404960
Camera AFZ Ex Alu, Art. no 8903980
SStEC-740-AFZ-EX-ALU/SST
Art. no 8903990
OPTIONAL
Junction box
Part number 0504791
12AWG
Display 10”
12AWG
Optional display
Display Cable
Cable
Cable
Art. No 1221300
5m
Camera cable Art. No 1221300
zone 1, 2
Total cable lenght = max 200m
Shielding and armoring of the Multicable may never come in contact with ground
(also not in combination with gland).
B
OPTIONAL
Display 7”
Ex-PCB
Set Ex
board Connection
Plate Art. noBoard
0404960
Camera AFZ Ex Alu, Art. no 8903980
SStEC-740-AFZ-EX-ALU/SST
Art. no 8903990
OPTIONAL
Junction box Armored
Part number 0504770
12AWG
Display 10”
12AWG
Optional display
Display Cable
Cable
Armored Cable
Art. No 1221320
5m
Camera cable Art. No 1221300
zone 1, 2
Total cable lenght = max 200m
Shielding and armoring of the Multicable may never come in contact with ground
(also not in combination with gland).
Zone 1,2,21,22
CE0344
EC-740-AFZ-EX-ALU
Ex II 2 G Ex ib mb px IIC T5 Gb
Ex II 2 D Ex mb tb IIIC T89°C Db
T-amb. -40°C to +75°C
EC-740-AFZ-EX-SST
Ex II 2 G Ex ib mb px IIC T5 Gb
Ex II 2 D Ex mb tb IIIC T92°C Db
T-amb. -40°C to +65°C
All data are subject to change without notice. All dimensions are for commercial purpose only.The
camera/display systems comply with the latest CE, ADR, EMC and mirror-directive regulations. All
products are manufactured in accordance with the ISO 9001 quality management system, ISO 14001
environmental management systems and all Ex products with the IECEx scheme and ATEX directives.
www.stahl-camera.de
R. STAHL Camera Systems GmbH
Im Gewerbegebiet Pesch 14 | D-50767 Cologne | Germany
Phone: +49 221 59 808 300
Website: www.stahl-camera.de