32327371-001 - Lyric™ C1 Wi-Fi ® Security Camera

Lyric™ C1 Wi-Fi Security Camera
USER MANUAL
Download the Lyric app
To setup and use your new security
camera, search for Honeywell Lyric
in the App Store or Google Play.
GET IT ON
Lyric
Before you begin
Read these instructions carefully. Failure to follow these instructions may damage
the product.
Need help?
If you need help at any point during the installation and setup of the
Lyric C1 Wi-Fi Security Camera, please contact Honeywell Support
using the Contact Us page at getconnected.honeywell.com.
ii
Contents
Welcome • 1
Camera overview • 2
Placement • 3
With stand • 3
Without stand • 3
Installation • 4
Download the Honeywell Lyric app • 4
Launch the Lyric app • 4
Connect the power cable • 4
Connect • 5
Connect to mobile device • 5
Connect to Wi-Fi • 5
Status LEDs • 6
Operation • 7
Remove/replace the stand • 7
Lyric app experience • 7
Reset • 7
SD card • 7
iii
App overview • 8
Livestreaming • 9
Configure alerts • 10
Select alert notification type • 10
Select alert recipients • 11
Review clips • 11
Camera settings • 12
Turn the LED on and off • 14
Turn the microphone on and off • 14
Motion detection • 15
Sound detection • 16
Smoke or carbon monoxide alarm detection • 17
Delete a camera • 18
iv
Set up detection zones • 20
Geofencing setup • 19
App settings and account info • 22
Manage messages • 23
Specifications • 24
v
vi
Welcome
Congratulations on your purchase of Honeywell’s Lyric™ C1 Wi-Fi
Security Camera. You can monitor visitors, pets, and family
yourself—anytime, anywhere.
What’s in the box?
You should find:
• Honeywell Lyric C1 Wi-Fi Security Camera
• Optional mounting screw and wall plug
• Power supply
• 8 GB Micro SD card
• CCTV sticker
1
Camera overview
Camera lens
LED indicator
Power cable
Reset hole
Stand
SD card and slot
2
Placement
With stand
Place the camera in a desired location for
viewing and recording.
Without stand
You can also mount the camera directly to
the wall without the stand using the supplied
fixings.
3
Installation
Download the Honeywell Lyric app
Note: Have your Wi-Fi password available.
1 Make sure bluetooth is enabled on your mobile device.
2 Search for Honeywell Lyric in the App Store or Google
GET IT ON
Lyric
Play.
3 Download the Honeywell Lyric app.
Carrier
8:08 AM
100%
Add New Device
Select a device to installl
Lyric C1 Wi-Fi
Security Camera
Launch the Lyric app
4 Launch the Lyric app.
5 Select INSTALL A DEVICE. Select Lyric C1 WIFI Security
Lyric Water Leak &
Freeze Detector
Lyric T5
Camera, then create an account (if necessary), or sign in
to your Lyric account.
6 Follow the instructions in the Lyric app to name the
camera and its location.
Connect the power cable
7 Remove the camera base and plug the power cable’s micro USB end into the camera.
8 Reinsert the camera base and plug the camera into a power outlet.
9 Wait until the LED on the camera blinks blue (about 1 minute), then press NEXT.
Note: If the LED turns solid red, it means the connection mode timed out. Unplug the
camera and plug it back in.
4
Connect
Connect to mobile device
1
2
Carrier
8:08 AM
100%
Connect
Scan code to connect camera
The app will look for the camera.
• For one camera, it will connect
automatically.
• For more than one camera, the app will
prompt you to select one camera at a time.
Select the camera you want to connect.
A QR code will display in the app. To connect
your camera to the app, hold the QR code
approximately 7-20 cm from the camera lens.
2.7-7.9 in
NEXT
3 When successful, the camera LED turns purple
and the camera beeps.
Connect to Wi-Fi
Note: Make sure that you are on the same Wi-Fi
network you wish to connect your camera to.
1
Choose your Wi-Fi network from the list.
Press NEXT.
2 Enter your Wi-Fi password, if necessary.
Press DONE.
Note: The camera will beep during some steps in
this process.
5
Status LEDs
During Wi-Fi connection and camera operation, the LED shows the status of
the camera.
LED
Camera state
During installation
Blinking blue
Powered up. Ready to begin setup.
If the LED blinks blue during setup, it has lost
bluetooth connection. Unplug it and plug it back in
again. See “Connect the power cable” on page 4
for instructions.
Solid blue
Connected to App. Ready to complete setup.
Solid red (for
2 seconds)
Setup timed out, or connection failed. The LED will
then turn solid purple. Unplug camera, plug it back
in, and restart the process.
Solid purple
QR Code scan complete.
See “Connect to Wi-Fi” on page 5.
Blinking green
Connecting to Wi-Fi network.
Solid green
Connected to Wi-Fi network.
During operation
Blinking green
Connecting to Wi-Fi network.
Solid green
Connected to Wi-Fi and operating.
Blinking red
Not connected to Wi-Fi.
6
Operation
Remove/replace the stand
The Lyric C1 Camera stand is connected to the camera by a magnet. If you wish
to mount on the wall or replace the SD card, simply pull the stand from the
camera. To replace, just push it back on the base of the camera.
Lyric app experience
When you launch the Lyric app, live video from your camera
will be displayed.
If you have multiple cameras, a list will appear. Select the
camera you would like to view.
Reset
If your Wi-Fi connection fails or you need to connect to a
different Wi-Fi network, insert one end of a paperclip into
the reset hole. Press and hold it for 10 seconds until you
hear a chirp.
SD card
The camera comes with an encrypted 8GB SD card installed. It stores images
if the camera’s connection to the cloud is lost. You can replace it with any
compatible SD card, up to 64GB.
7
App overview
These are the controls available during livestream.
Camera on/off
Press to turn the
camera on or off.
Motion/sound detector
Press to turn the motion or
sound detection alerts on or
off during livestream.
Snapshot control
Press to take pictures during
livestream. Images are saved
to mobile device’s photos.
Push to Talk
Press and hold
to speak from
the camera.
Release to stop.
Video clips
When the camera detects motion or sound, it records
a clip. Those clips are listed in chronological order
here. Swipe up to see the list of clips, then scroll to
see the full list. Press a clip to watch it.
8
Livestreaming
You can use your security camera to get a live look-in wherever
you place the camera. Each livestream session lasts 90
seconds. When one livestream session ends, you can start a
new one.
Use the Push to Talk button to talk to someone through the
camera.
Livestreams are not saved to the SD card, and are not
uploaded to your cloud storage.
By default, livestreams are in HD. If data limits are a concern,
change this setting to Auto or Low. See “Video quality” on
page 13.
9
Configure alerts
When the camera detects a sound or
motion, it sends an alert to the app.
1 Press the Alerts icon when a red bubble
appears.
2 The alerts are displayed with the alert
type and the date/time stamp.
3 Press an alert to view the 30-second
video clip.
4 Swipe left, then press Dismiss to remove
the alert.
5 To dismiss all alerts, press Edit, then
press DISMISS ALL.
Select alert notification type
1
Press the side menu button on the home
screen.
2 Press Alerts and Notifications.
3 Select the notification type you want
to set (Camera Status, Motion Event, or
Sound Event).
4 Choose to turn on or off the following
types of notifications:
• Camera status ON/OFF alert displayed in the alerts list.
• Push Notification - displayed on your
mobile device.
• Email Notificaton - sent via email
10
Select alert recipients
You can choose multiple people to have access to the camera and receive alerts.
1
Press the side menu button on the home
screen.
2 Press Manage Users.
3 Press Add User at the bottom of the
app.
4 Enter the email address of the person
you want to add to the camera then
press SEND.
Review clips
1
Scroll up from the bottom of the home
screen to show clips.
2 Press a clip to watch it.
3 Press FILTER to sort the clips, then
select a filter type (All, New, Viewed,
Downloaded).
11
Camera settings
Camera settings can be controlled in the app. You can set up things like night mode, use
Lyric’s Geofencing capability, and turn on Motion or Sound Detection, and other settings.
1
Press the side menu button on the
home screen.
2 Press the camera you want to change
the settings on. Look for the name you
gave the camera when installed.
3 To change the camera mode, press
Camera Mode.
4 Press a setting for the camera mode:
• Manual - turn the camera on or off
using the app.
• Geofencing - the camera turns on
when you leave the area, and turns
off when you return.
5 To change the night vision settings,
press Night Vision.
6 Press a setting for night vision:
• Auto - the camera adjusts its
settings automatically.
• On - night vision is always on.
• Off - night vision is always off.
12
Video quality
You can change the quality of your video stream. This will help limit data use on your
mobile device.
1
Press the side menu button on the
home screen.
2 Press the camera you want to change
the settings on. Look for the name you
gave the camera when installed.
3 Press Video Quality.
4 Press a setting for video quality:
• Auto - the camera adjusts its
settings automatically.
• Low - lower quality video that uses
less data or bandwidth (VGA).
• High - higher quality video that
uses more data or bandwidth
(720p HD).
13
Turn the LED on and off
The LED can be turned off and back on in the app.
1
Press the side menu button on the
home screen.
2 Press the camera you want to change
the settings on. Look for the name you
gave the camera when installed.
3 Use the camera LED switch to turn the
LED on or off.
Turn the microphone on and off
The microphone can be turned off and
back on in the app.
1
Press the side menu button on the
home screen.
2 Press the camera you want to change
the settings on. Look for the name you
gave the camera when installed.
3 Use the Camera Microphone switch to
turn the microphone on or off.
14
Motion detection
You can turn motion detection on or off, as well as adjust the sensitivity, in the app.
1
Press the side menu button on the
home screen.
2 Press the camera you want to change
the settings on. Look for the name you
gave the camera when installed.
3 Press Motion Detection.
4 Use the Motion Detection switch to turn
motion detection on or off.
5 Adjust how big a movement triggers
the motion event by selecting Off, Low,
Medium, or High.
• Off - ignores all movement.
• Low - detects only big movement.
• Medium - detects general movement and changes in environment.
• High - detects all movement and changes in environment.
To set up separate zones, see “Set up detection zones” on page 20.
15
Sound detection
You can turn sound detection on or off, as well as adjust the sensitivity, in the app.
1
Press the side menu button on the
home screen.
2 Press the camera you want to change
the settings on. Look for the name you
gave the camera when installed.
3 Press Sound Detection.
4 Use the Sound Detection switch to turn
sound detection on or off.
5 Adjust the volume of sound that
triggers a sound event by selecting
Low, Normal, or High.
• Low – detects only loud sounds,
such as a motorcycle or food
processor, around 80–100 decibels.
• Normal – detects general sounds
like a refrigerator, air conditioner
or conversation, around 50–100
decibels.
• High – detects even the quietest
sounds like a pin drop or whispers,
around 10–100 decibels.
16
Smoke or carbon monoxide alarm detection
If your smoke or carbon monoxide alarm sounds and your camera is on, you will receive an
alert that your smoke or CO alarm has been detected.
To test this feature and check if your smoke/CO detector is compatible, press and hold the
test button on your smoke/CO detector for at least 5 seconds or 3 cycles of the detector’s
alarm. A shorter test might not trigger a sound event.
17
Delete a camera
You can remove a camera from your
account in the app.
1
Press the side menu button on the
home screen.
2 Press the camera you want to delete.
Look for the name you gave the
camera when installed.
3 Press Camera Configuration.
4 Press DELETE CAMERA.
Note: Deleting the camera from the app
will result in losing all stored video clips
that have not been saved to another
device.
5 To re-install the camera, follow the steps in “Launch the Lyric app” on page 4.
18
Geofencing setup
Geofencing uses the location of your mobile device to automatically disable your camera
when you arrive home, and enable it when you leave.
Note: Turn geofencing on in the camera settings. See “Camera settings” on page 12.
1
Press the side menu button on the
home screen.
2 Press Geofence.
3 Use the Geofence this Location switch
to turn geofencing on or off.
4 When geofencing is on, the Location
Status will indicate whether you are
Home or Away.
5 Press Geofence Radius to change how
close your smartphone is to the camera
for it to turn on (when Away) or off
(when Home).
6 Press the black dot and drag the
geofence radius to the size you desire.
7 Press NEXT.
8 When the geofencing is set, press
NEXT.
19
Set up detection zones
Draw your own alert zones for extra sensitivity or to ignore background motion such as a
ceiling fan.
1
Press the side menu button on the
home screen.
2 Select the camera you want to change
the settings on. Look for the name you
gave the camera when installed.
3 Press Motion Detection.
Note: The app will need access to the
camera so you can set up detection zones.
4 The default area for Zone 1 is the entire
snapshot. To re-size, drag the rectangle
from any corner or edge. Drag from the
center to re-locate.
5 Set the desired sensitivity for Zone 1 by
selecting Off, Low, Medium, or High.
• Off - no motion detection in this
zone.
• Low - detects only big movement.
• Medium - detects general movement
and changes in environment.
• High - detects all movement and
changes in environment.
20
Set up detection zones
6 Press Zone 2.
7 Press Enable this Detection Zone.
8 Re-size or re-locate Zone 2, then set
the desired sensitivity, following the
steps you did for Zone 1.
Note: Zones can not overlap.
21
App settings and account info
Follow these steps to see app settings such as version info, help, etc.
1
Press the side menu button on the
home screen.
2 Press App Settings & Info.
3 Select any of the menu options for
more information.
Follow these steps to see your account
information, such as name, email address,
password reset, etc.
1
Press the side menu button on the
home screen.
2 Press My Account.
3 Change your name, email address,
password, or access. Follow the steps in
the app to complete.
22
Manage messages
Use the app to view and manage messages about motion or sound detected by your
camera.
1
Press the side menu button on the
home screen.
2 Press Messages.
3 The messages are displayed.
4 Press a message to read it.
5 Press the back arrow to go back to the
list of messages.
23
Specifications
Dimensions (W x H x D): 6.3 x 11.2 x 4.6 cm
Weight Camera & Base: 113 g
Weight Camera Alone: 85 g
Video Resolution: 720p HD @30 fps
Video Resolution: 1 MP JPEG
Video Compression: MPEG-4 (H.264)
Field of View: 135° / 5x Digital Zoom
Wi-Fi Connectivity: IEEE 802.11b/g/n; Single Band 2.4 GHz
Minimum Bandwidth: 1.333 Mbps
Power Supply: 5Vdc / 2A
Operating Temp.: 0°–40°C
Micro SD Card (capacity): U
p to 64 GB SDXC; recommend class 10 Micro SD
Card (8 GB card included)
Night Vision: Up to 5 m
24
25
Lyric™ C1 Wi-Fi Security Camera
Wi-Fi® is a registered trademark of Wi-Fi Alliance®
Honeywell Novar ED&S
The Arnold Centre,
Paycocke Road,
Basildon, Essex, SS14 3EA
United Kingdom
getconnected.honeywell.com
© Honeywell 2017
32327371-001 Rev.A
Printed in United Kingdom