- No category
advertisement
USER MANUAL
MODEL:
PT-101H2
HDMI Repeater
P/N: 2900-300564 Rev 1
www.kramerAV.com
Contents
Achieving the Best Performance
Defining the PT-101H2 HDMI Repeater
Figures
Figure 1: PT-101H2 Front and Rear Panel
Figure 2: Connecting the PT-101H2 HDMI Repeater
PT-101H2
–
Contents i
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.
Congratulations on purchasing your Kramer PT-101H2 HDMI Repeater. This product is ideal for:
Home theater, presentation and multimedia applications
Rental and staging
Education and corporate
PT-101H2 - Introduction 1
1
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging materials for possible future shipment
Review the contents of this user manual
Go to www.kramerav.com/downloads/PT-101H2 to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer highperformance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighbouring electrical appliances that may adversely influence signal quality
Position your PT-101H2 away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics power supply that is provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall before installing
2 PT-101H2 - Getting Started
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at
http://www.kramerelectronics.com/support/recycling/
.
PT-101H2 - Getting Started 3
3
3 Overview
The PT-101H2 is a high-performance HDMI repeater and distance extender.
In particular, the PT-101H2 features:
Range extension up to 10m (33ft) for 4K @60Hz 4:4:4 Ultra HDTV resolution, (5m on the input to the PT-101H2 and 5m on the output)
Range extension up to 20m (66ft) for 4K @30Hz (15m on the input to the
PT-101H2 and 5m on the output)
A maximum data rate of 17.82Gbps (5.94Gbps per data channel)
HDCP 2.2 and HDCP 1.4 compliance
Kramer Equalization & re-Klocki ng™ Technology that rebuilds the digital signal to travel longer distances
HDMI power on the output follows the input, (that is, there is no power on the output when there is no active power on the input)
Transparent HDMI 2.0, HDMI 1.4, HDCP 2.2, HDCP 1.4 support
A Pico TOOLS™ enclosure
4 PT-101H2 - Overview
4 Defining the PT-101H2 HDMI Repeater
Figure 1 defines the front and rear panels of the PT-101H2 HDMI Repeater.
Figure 1: PT-101H2 Front and Rear Panel
# Feature Function
1 OUTPUT HDMI Connector Connect to a 4K HDMI acceptor, (for example, a smart
TV)
2 ON LED
3 INPUT HDMI Connector
4 5V DC Connector
Lights blue when power is connected.
Lights red when only the HDMI input signal is present.
Lights purple when the power and HDMI signal are connected
Connect to a 4K HDMI source, (for example, a PC)
Connect to the supplied power adapter
PT-101H2 - Defining the PT-101H2 HDMI Repeater 5
5
5 Connecting the PT-101H2
Always switch off the power to each device before connecting it to your PT-101H2. After connecting your PT-101H2, connect its power and then switch on the power to each device.
To connect the PT-101H2 as illustrated in the example in Figure 2:
1. Connect an HDMI source (for example, a 4K graphics source - PC) to the
INPUT HDMI connector.
2. Connect an OUTPUT HDMI connector to the HDMI acceptor (for example, a
4K display - smart TV).
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity, (not illustrated in Figure 2 ).
6
Figure 2: Connecting the PT-101H2 HDMI Repeater
PT-101H2 - Connecting the PT-101H2
6 Technical Specifications
INPUT:
OUTPUT:
BANDWIDTH:
COMPLIANCE WITH
HDMI STANDARD:
INDICATOR LED:
POWER SOURCE:
OPERATING
TEMPERATURE:
STORAGE
TEMPERATURE:
HUMIDITY:
COOLING:
ENCLOSURE TYPE:
DIMENSIONS:
RACK MOUNT:
FURNITURE MOUNT:
PRODUCT WEIGHT:
SHIPPING WEIGHT:
VIBRATION:
1 HDMI on an HDMI connector
1 HDMI on an HDMI connector
Supports up to 17.82Gbps (5.94Gbps per graphic channel).
Supports up to 4K @60Hz 4:4:4
HDMI 1.4, HDMI 2.0
HDCP 1.4, HDCP 2.2
ON
5V DC, 230mA
0° to +40°C (32° to 104°F)
–40° to +70°C (–40° to 158°F)
10% to 90%, RHL non-condensing
Convection
Aluminium
6.22cm x 5.18cm x 2.44cm (2.45" x 2.04" x 0.96") W, D, H
With optional adapter
With included rubber feet
0.1kg (0.22lbs) approx.
0.5kg (1.1lbs) approx.
ISTA 1A in carton (International Safe Transit Association)
REGULATORY
COMPLIANCE:
ENVIRONMENTAL
REGULATORY
COMPLIANCE:
INCLUDED
ACCESSORIES:
OPTIONS:
CE
Complies with appropriate requirements of RoHs and WEEE
Power supply 5.2V DC 2A
WARRANTY:
RK-
4PT 19” rack adapter
7 years parts and labor
Specifications are subject to change without notice at http://www.kramerelectronics.com
PT-101H2 - Technical Specifications 7
7
P/N:
2900- 300564
Rev: 1
SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing
For the latest information on our products and a list of Kramer distributors, visit our Web site to find updates to this user manual.
We welcome your questions, comments, and feedback.
www.kramerAV.com [email protected]
1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement