How to Mount the camera Connect the camera

How to Mount the camera
1. Attach the camera to the coupler and the adapter.
2. Attach the end of the adapter to your microscope, make sure that it is centered.
Connect the camera
1. Connect the camera to your power supply
2. Connect the included mouse via USB port.
3. Connect the camera to your screen via HDMI cable
4. Switch the camera on, by clicking on the power switch.
5. Switch your screen on.
Now there should be image on your screen.
Imaging Capability
The software is very simple to use,
here is only 2 icons to click, one for
capture images, the
other one for setting menu. In order
to make this menu visible move your
cursor to the left side of your screen
and the menu will appear
1. To capture an image simply
click capture, the software
automatically saves the
image on the included SD card.
2. If adjustment is needed click on settings.
Setting and options
1. Auto exposure, the software automatically adjusts the exposure time.
2. Lock white balance.
3. Manual adjustment, exposure time 1ms to up to 10 seconds
4. Setting gain
5. Control of, Gamma, contrast and staturation
6. Control of colors
7. Control of brightness, sharpness and denoise
8. Image capture
9. Video capture
10. Reset settings to default
11. Frequency option, if your light source is an older flickering type. Select 50 / 60HZ
dependent on you local power network.
Video Recording capability
on to start recording in 1080P videos
30fps. The recorded video files will
be saved on the included SD card.
Image and video playback
In order to make this menu visible move your cursor to
the right side of your screen and the menu will appear
1. Measure Calibrate, to calibrate the system you
need a calibration slide. Place the slide on the
stage then draw calibration ruler, enter the 'Ruler
length' click enter.
2. Measure
3. Horizontal mirror
4. Vertical mirror
5. Zoom in
6. Zoom out
7. Returne
8. Cross curve
9. Compare images, the image comparison
gives the user the possibility to compare a
captured image with live image.
10. Browse images and videos to browse the
captured images click on browse. All the captured
images are saved on the SD card.
The users can browse the images, zoom in on
images or delete unnecessary images. It is also
possible to review, and playback the video files on
the SD card.
Quick Setup - HDMI16DPX
Power input
HDMI output
USB 2.0 port
SD card slot
Power switch
Product Includes:
HDMI16DPX camera
8GB SD card.
USB 2.0 cable
HDMI cable
Download PDF
Similar pages