Square LED
SPECIFICATIONS
Type:
Project:
SQMS | LED | Direct | Suspended
HIGHLIGHTS
ION
AT
AL
TOT
360˚
SYSTE M
INTE
GR
•Peerless 360˚ Total System Integration features
5-year limited warranty by Acuity Brands
covering all components and construction
• 4’ and 8’ sections
• Up to 86 lm/W
• Two lumen packages
•Softshine®-engineered comfort optics
• Continuously illuminated lens
• Available with lit corners
empowered
•Flicker-free dimming to dark (0.1%)
powered by eldoLED® driver
•Integrated nLight® module for system
networking (optional)
DIMENSIONS
•Integrated sensor for daylight dimming
and/or occupancy detection (optional)
SQMS
• Flat or sculptured end caps
•White, black, painted aluminum, anodized aluminum
or custom color
3 1 ⁄ 2”
3 1 ⁄ 2”
•LED Lighting Facts® partner
DETAILS
LUMEN PACKAGES
Direct LED Ouput
Flat end cap
Option:
Sculptured end cap
COMPANION LUMINAIRE(S)
400LMF
800LMF
Delivered Lumens Per Foot
407
781
Input Watts Per Foot
4.8
10
Lumens Per Watt
84
79
DISTRIBUTION
100% Down
SQM4 Square I/D
SQM1 Square Indirect
SQWS Square Wall Direct
CUSTOMIZATION
Ask us about the following possibilities: Higher lumen outputs,
alternate section lengths in 2’ increments,alternate voltages,
additional mounting options, custom colors, higher CRI and R9
values and other modifications.
© 2014-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in
this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice.
PeerlessLighting.com
510.845.2760 | TechSupport@PeerlessLighting.com
Rev. 05/18/16
1
Type:
Square LED
Project:
SQMS | LED | Direct | Suspended
SPECIFICATIONS
Housing
Dimming Driver
Environment
Extruded aluminum housing is 3.5” square.
eldoLED® driver provides “natural dimming” with
smooth, continuous and flicker-free dimming to
dark (0.1%). Syncing for controls: 2mA max.
THD: < 20%. Insignificant inrush current at 120 and
277VAC. FCC Class A and B tested for EMI and RFI.
Ambient operating temperature between 0° C and
25° C. For damp location label, choose option DL.
End Caps
Extruded aluminum end caps are mechanically
attached with no exposed fasteners. Flat end
caps standard. For sculptured end caps, choose
option SCEP.
Validation
CSA/CUS listed. LM-79 tested. Individual sections
meet FCC Part 15 requirements. Lighting Facts partner.
For 0-10V driver details go to: PeerlessLighting.com/561M
Packaging
Controls and System Networking Options
Color
Color for housing and end caps is gloss white, black,
painted aluminum or anodized aluminum. Consult
factory for custom colors.
For wired networking via Cat-5e, choose an integrated
nLight® module. For daylight dimming and/or dual
technology occupancy detection, see Page 5 for
integrated sensor options.
Luminaire Length
One control module per 4’ section or 40’ maximum row.
4’ and 8’ lengths in a single section for exact
suspension spacing of 4’ and 8’. For total length, add
1” for each flat end cap and 2 1/4” for each sculptured
end cap. Longer rows are comprised of starter, joiner
and end sections.
100% post-consumer recycled cardboard box and
inserts. Biodegradable protective luminaire bag.
Recycled kraft paper tape.
Warranty
5-year limited warranty. Complete warranty
terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx
Lumen Management
For constant lumen output at 80% of initial light
output, choose lumen management (CL80).
Note: Actual performance may differ as a result of
end-user environment and application.
All values are design or typical values, measured
under laboratory conditions at 25°C.
Electrical
LED light engine — consisting of modular LED boards
and 0-10V dimming driver — is rated for 50,000
hours (L 80) at 25° C ambient temperature. Specify
120V or 277V. Pre-wired with 16AWG fixture wire.
For special circuiting or wire gauge, consult factory.
Plug-in electrical connectors included.
Source
Two LED lumen packages and three available
color temperature options (3000K, 3500K and
4000K) — all within 2.5 MacAdam ellipses.
Optics
Softshine® optical system consists of co-extruded
acrylic lenses and metal reflectors. Lenses connect
end to end to form a continuous line of light.
MODEL NUMBER Example: SQMS LLP 16FT MSL8 80CRI 35K 800LMF DARK ZT 120 SCT F1/24A C110
t
t
t
t
Luminaire
Linear Length Plan
Total Run Length
Maximum Section Length LED Color Rendering LED Color Temperature Direct LED Output
SQMS
LLP
LSL
Linear longest possible
Longest same length
__FT
Indicate Luminaire
Row Length in 4’
increments. Ex: 12FT
t
MSL4
MSL8
t
80CRI
4' Section(s)
8' Section(s)
80+ CRI
t
t
t
t
t
Minimum Dimming Level
Control Input
Voltage
Wiring Option
Emergency Options
DARK
ZT
0-10V
NLIGHT nLight enabled
DALI
DALI
Constant current,
dimming to < 1%
120 120V
277 277V
SCT Single
circuit
t
30K
35K
40K
400LMF
3000K
3500K
4000K
800LMF
400 Nominal direct lumens
per foot
800 Nominal direct lumens
per foot
t
(Blank)
1EC
2EC
__EC
Control Option
None
(1) Emergency circuit module
(2) Emergency circuit module
___ Emergency circuit modules
(blank) No sensor
ADC
Daylight dimming sensor
PDT
Occupancy sensor occupancy/
daylight sensor
Emergency type is installed in last 4’ or 8’
luminaire sections. Separate feed required.
t
t
t
Lumen Management
Mounting Type/
(Blank)
CL80
None
Constant lumen
output, 80% *
* Available in ZT or NLIGHT.
Only dims to 1%
t
F1/
T-bar ceiling
(universal mounting
bracket)
F1A/ T-bar ceiling (UMB
with integrated J-box)
F2/ Hard ceiling
(horizontal J-box)
Overall Suspension
24A
24" adjustable
36A
36" adjustable
48A
48" adjustable
72A
72" adjustable
96A
96" adjustable
144A 144" adjustable
192A 192" adjustable
240A 240" adjustable
Measured from ceiling
to bottom of luminaire.
Color
C032 Gloss white
C100 Anodized
aluminum
C110 Painted
aluminum
C201 Black (low
gloss)
C099 Custom color
Options
BLK*
CSA
CP
DL
ELH**
ELS2**
GLR
© 2014-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in
this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice.
Black cord and canopy
Manufactured to
Canadian Standards
Chicago Plenum
(available with F1A only)
Damp location listed
Emergency through wiring
w/single feed, shared
neutral
Emergency through
wiring w/single feed,
seperate neutrals
Fast blow
GMF
MCS
Slow blow
Matching canopy at
support for aesthetics
MCSJ Matching canopy for J-box
mounting at non-power
feed support locations
OJB
Offset J-box at feed
SCEP Sculptured end cap
SLP
Sloped ceiling
*Not available with NLIGHT
**Not available with CSA
PeerlessLighting.com
510.845.2760 | TechSupport@PeerlessLighting.com
Rev. 05/18/16
2
Type:
Square LED
Project:
SQMS | LED | Direct | Suspended
PHOTOMETRICS
400LMF 80CRI 35K
84 lumens per watt
1629 delivered lumens
per 4’ section
800LMF 80CRI 35K
79 lumens per watt
3124 delivered lumens
per 4’ section
100% down
100% down
CONFIGURATIONS
Square can be configured with special mitered sections to provide
seamless corner illumination where two luminaires join together.
Reference Pattern Connector Guide for additional details.
WEIGHTS & SUPPORT SPACING
Suspension spacing equals section length. Default location shown. Consult factory for stem mounting suspension spacing and alternate locations.
STANDARD SECTIONS
Key:
4’ Section
18 LBS
• Support location
• Support location with feed
1” standard end cap
2 1⁄4” optional sculptured end cap
4’-0”
4’-2” O.A.
8’-0”
8’ Section
34 LBS
8’-2” O.A.
8’ Section
4’ Section
52 LBS
8’-0”
8’ Section
8’ Section
68 LBS
8’-0”
8’ Section
8’ Section
4’ Section
86 LBS
8’-0”
4’-0”
12’-2” O.A.
8’-0”
16’-2” O.A.
8’-0”
4’-0”
20’-2” O.A.
PLAN VIEW
LINEAR PLAN:
PEERLESS offers the ability to provide a continuous run plan to suit your requirements by optionally offering three different methods of configuration.
LSL- Linear Same Length:
In this configuration, each segment is the same length and is standardized based on the longest length available and is the only option provided. Because it is dependent
on one segment length there are mathematical limitations on what overall row lengths can be achieved. Example: 20 FT row would be achieved with 5, 4 FT long
segments equaling 20 FT (nominal).
LLP- Linear Longest Possible
In this configuration, the longest length available is optimized, resulting in the fewest segments and mounting locations. Caution, should be used where balanced
appearance is a concern. Example: 20 FT run would have 2, 8 FT segment and 1, 4 FT segment at the end of the run.
LLP
LSL
8 FT
4FT
4FT
8 FT
4FT
4FT
4FT
4FT
© 2014-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in
this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice.
PeerlessLighting.com
510.845.2760 | TechSupport@PeerlessLighting.com
Rev. 05/18/16
3
Type:
Square LED
Project:
SQMS | LED | Direct | Suspended
MOST COMMON MOUNTING TYPES AND OPTIONS Options available for this specific luminaire are checked in the boxes below.
Mounting Type
Mounting Options
F1/For use with most T-Bar and screw slot grid ceilings. Designed for on-grid and
off-grid applications.
MCS F2/For use with recessed or surface mount horizontal J-box applications.
F3/Stem mounting for use with recessed or surface mount horizontal J-box
applications. Check with local jurisdiction regarding rigid stem code requirements.
F1A/For use with most T-Bar and screw slot grid ceilings. Designed for on-grid and off-grid
applications. Comes complete with vertical J-box with built-in wire way. See also CP.
Matching canopy at support for aesthetics.
MCSJMatching canopy for J-box mounting at non-power
feed support locations.
OJB
Offset J-box at feed.
SLP OJBSloped ceiling couplers and offset J-box option at feed.
For more detailed mounting drawings and information, see PeerlessLighting.com/MountingOptions
✓ Indicates mounting options available with this luminaire.
✓ F1/
✓ F1/MCS
✓ F1A/
✓ F1A/MCS
F3/
Power Feed
Power Feed
Power Feed
Power Feed
Power Feed
Support
Support
Support
Support
Support
✓ F2/
✓ F2/MCS
✓ F2/MCSJ
✓ F2/OJB
✓ F2/SLP OJB
Power Feed
Power Feed
Power Feed
Power Feed
Power Feed
Support
Support
Support
Support
Support
© 2014-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in
this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice.
PeerlessLighting.com
510.845.2760 | TechSupport@PeerlessLighting.com
Rev. 05/18/16
4
Type:
Square LED
Project:
SQMS | LED | Direct | Suspended
For more information about sensor and networking options, download the controls guide at PeerlessLighting.com/ControlsGuide
INTEGRATED SENSOR OPTIONS
Control
Input
Integrated
Sensor
NLIGHT
ADC
NLIGHT
PDT
ZT
ADC
ZT
PDT
Daylight
Dimming
Daylight
Dimming
and/or
Occupancy
Detection
X
X
X
nLight
Wired
Networking
Link to Spec Sheet
X
PeerlessLighting.com/nES-ADCX
X
PeerlessLighting.com/nES-PDT7
PeerlessLighting.com/nES-ADCX
X
PeerlessLighting.com/nES-PDT7
Daylight harvesting deactivated by default and field programmed per sequence of operations for PDT
sensor options.
Luminaires specified with nLight system networking ship with one RJ-45 connector integrated into
the luminaire, 10’ of Cat-5e cable and a splitter to control the entire luminaire row (depending on
wattage/voltage limitations). For multiple zones, please contact TechSupport@PeerlessLighting.com.
OCCUPANCY DETECTION COVERAGE
At the 7.5 ft (2.9 m) hanging height of a typical pendant mount fixture the sensor
provides 10 ft (3.05 m) radial detection of small motion. At a 9 ft (2.74 m) hanging
height the radius is 12 ft (3.66 m) for small motion.
4.5
3.8
3
2.5
1.5
0.75
0m
0.75
1.5
2.5
3
3.8
4.5
15
12.5
10
7
5
2.5
0 ft
2.5
5
7
10
12.5
15
PeerlessLighting.com
510.845.2760 | TechSupport@PeerlessLighting.com
Rev. 05/18/16
5
Adequate for walking motion detection from mounting heights between 7.5 ft (2.29 m)
and 20 ft (6.10 m).
Initial detection will occur earlier when walking across sensor’s field of view than when
walking directly at sensor.
Initial detection of walking motion into long coverage segment will occur at distances of
2x the mounting height up to 15 ft (4.57 m) and 1.75x up to 20 ft (6.10 m). Lens assembly
rotates 15° to enable adjustment in order to line up long segments.
Lens rotates 15° to
enable adjustment
COMPATIBLE nLIGHT COMPONENTS WITH INTEGRATED CONTROLS
nES ADCX
nES PDT 7
EZB COMPATIBILITY Additional control options with eldoLED 0-10V driver(s).
PeerlessLighting.com/eldoLED-compatibility
© 2014-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in
this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice.