SFP modules for fiber optic transmission

Pulsar
SFP modules for fiber optic transmission
®
The GBIC series
CODE:
NAME:
GBIC-103
EN
1.0/I
SFP GBIC-103 module, single-mode, 1,25G, Tx:1310/Rx:1550, SC, DDM (TORNADO)
Features:
·
·
·
·
·
·
Supported optical fiber - single-mode
Single fiber transmission (Wavelength-division multiplexing,
WDM technology)
Transmission speed 1.25Gb/s (IEEE 802.3z 1000Base-FX)
Transmission range up to 20km
Optical fiber type – SC
Warranty – 2 years from the production date
DESCRIPTION
SFP modules (Small Form-factor Pluggable) commonly referred to as GBIC (Gigabit Interface Converter) convert an
electrical signal into an optical signal.
The GBIC-103 Tornado input/output device is a module designed for up to 20km single (SM) mode fiber transmission.
Wavelength TX 1310nm, Wavelength RX 1550nm, transmission speed1.25Gb/s.
The module has two LC sockets with snap-lock system to prevent the connector from pulling out.
TECHNICAL DATA
Optical fiber type:
Single-mode
(SM) (8.3/125μm, 8.7/125μm, 9/125μm, and 10/125μm)
Transmission speed:
1.25 Gb/s
Transmission range:
Up to 20 km
Connectors type:
S.C.
Wavelength Tx:
1310 nm
Wavelength Rx:
1550 nm
Tx power/Rx sensitivity:
-8...-3 / ≥ -22 dB
Standards and protocols
IEEE 802.3z 1000Base-FX
Digital Diagnostics:
DDM
Operation temperature:
0... 70°C
Operation humidity:
0...85%
Power supply:
DC 3.3V (power from SFP port )
Warranty:
2 year from the production date
APPLICATION
The SFP module has a built-in Digital Diagnostics Monitoring (DDM), which allows the user to monitor the basic
parameters of the module's operation in real time. These include, among others, Supply Voltage, Temperature, optical
power of signal transmitted by the transmitter, and the power of signal received by the receiver.
This module is designed to operate with devices of different manufacturers that do not have security systems. The module
operates, among others, with TP-LINK, ULTIPOWER, or CISCO devices. This SFP module is not compatible with devices
of manufacturers that have security systems.
Proper communication with other devices requires the use of the GBIC-104 module.
1310nm
Optical fiber
1xSM
1550nm
GBIC-103
GBIC-104
Tel.+48 14-610-19-40, fax: +48 14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl