PC PSU
FSP450-60APN(85)
DESCRIPTION
This specification describes a 450 watts power supply. With
+5V stand-by, second 12V rail and remote ON/OFF control
for ATX-12V system and a “Power factor collector (PFC )”
circuit to meet EPA requirement of input range with in
230V/50Hz.
APPLICATION
Desktop
W ATTAGE
Wattage:
450W
SAFETY STANDARD APPAOVAL
140mm(L) x 150mm(W) x
86mm(H)
GENERAL SPECIFICATION
Bronze
<0.5W
230V
Efficiency:
Bronze
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
EN55024
EN 61000-3-2
EN 61000-3-3
DIMENSION
Dimension:
PRODUCT HIGHLIGHT
Efficiency Level:
Erp Lot:
Input Voltage:
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
200-240 Vac
47-63 Hz
3.5Amp (maximum) at 230
Vrms/ 50 Hz. .
ENVIRONMENTAL SPECIFICATION
TEMP.Range:
MTBF:
OUTPUT SPECIFICATION
Output Rise Time:
+3.3V 20mS (maximum)
+5V 20mS (maximum)
+12 V1 20mS (maximum)
+12 V2 20mS (maximum)
-12 V 20mS (maximum)
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV
50mV
Regulation Load %
±5%
Output Max.(A)
24A
Output Min.(A)
0.5A
+5V
50mV
±5%
15A
0.3A
Storage Temperature: -40°C to +
70℃
The power supply reliability, when
calculated by “Bellcore” latest
revision are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
The special requirement is for
cooling fan that MTTF be guarantee
over 30,000 hours at 25℃ ambient
temperature.
+12V1
5mV
±5%
18A
0.5A
+12V2
120mV
±5%
18A
0.5A
NOTES
+3.3V & +5V total output not exceed 120W.
When +5V is load to 15A, the +3.3V maximum load is 13.63A.
When +3.3V is load to 24A, the +5V maximum load is 8A.
+12V1 & +12V2 total output not exceed 360W
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice
-12V
200mV
±10%
0.3A
0A
+5Vsb
50mV
±5%
2.5A
0A
Download PDF
Similar pages