Twist Strip™ Jacket Stripper for Shielded Multi-Wire

MCD-Tools GmbH
Kurmainzer Straße 73 · D-61440 Oberursel
Telefon +49 6171 2779191 · Fax +49 6171 2779199
E-Mail info@mcd-tools.de · www.mcd-tools.de
Twist Strip™
Jacket Stripper for Shielded Multi-Wire Cable!
NE W T
UC
PROD ASE
RELE
Twist Strip™
Fast Precision Twisted Conductor Cable Stripper
The Twist Strip™ is the best way to strip twisted, multiconductor
cable jackets. No more imprecise and dangerous razor blades.
Safe, accurate and repeatable, the Twist Strip™ makes quick work
of avionics harnesses and many other cable types, cutting preparation time by 2 to 10+ times.
Cable Stripper for Data Bus Twisted Pair Cables
CAN-30013 and NEW: 30014
Cable stripper for easy dismantling of the sheathing
of WF-cables. Range up to 3,50mm (1.378“) ø.
EMI/RFI One-Step Band Application Tool
for M85049/128 Shield Termination Bands
One-Step
Banding
DBS-2100 & DBS-2200 (M81306/1-01
& M81306/1
02) Tool System
for M85049/128-03, /128-04, /128-07, and /128-08 bands
The One-Step Band Application Tools are built to
M81306/1 and designed to install M85049/
128-03, M85049/128-04, M85049/128-07
and M85049/128-08 stamped buckle
bands. These tools are constructed to
survive the demands of production and
maintenance use, and remain precisely
adjusted to provide a quality band termination.
The tension-lock system gives the operator a positive
indication when the precise tension has been applied.
The Cut-Off handle easily cuts, bends, and locks the
shield band in one step.
DBS-2100 & DBS-2200 (M81306/1-01* & M81306/1-02*)
NE W T
UC
PROD ASE
RELE
NE W T
UC
PROD ASE
RELE
MCD-Tools GmbH
Kurmainzer Straße 73 · D-61440 Oberursel
Telefon +49 6171 2779191 · Fax +49 6171 2779199
E-Mail info@mcd-tools.de · www.mcd-tools.de
Safe-T-Cable™ Fastening System
SAE AS4536 (AS3509, AS3510, AS3511)
MIL-CRIMP - a strong connection
as per SAE AS 22520 (formerly M22520)
An extensive line of manual, pneumatic, hydraulic and electrical tools and accessories used to
crimp contacts, terminals, and other wiring system
components onto power and coaxial conductors:
M22520/ & commercial standard tools.
Save Time and Money
by replacing your old
Safety Wire System with
Safe-T-Cable™
Cable Lacing Fastener
Replaces Hand Ties and Cable Ties
Features:
– Installs faster and easier than hand-tying (labor savings,
reduced repetitive hand motions)
– Lace is softer than cable tie (reduces wear on wire bundles)
– Lace makes contact all the way around the bundle (reduces abrasion)
– Fastener head is smaller and more rounded than cable tie head
(Reduces the likelyhood of damage to bundle and surrounding components)
– Lighter than cable tie (improves fuel efficency)
– Ultra High Temp (min. 150° C)
Comparison: