PLX TECHNOLOGY PCI I/O Accelerators and USB Controllers

PLX Technology
Analog ICs
PLX TECHNOLOGY PCI I/O Accelerators and USB Controllers
Products may be RoHS compliant.
Check mouser.com for RoHS status.
PCI-LOCALBUS 32-BIT TARGET I/O ACCELERATORS
PCI 9030 SMARTarget™ I/O Accelerator
The PCI 9030 with SMARTarget™ technology provides an array of features that define a new level of performance, flexibility and simplicity in PCI designs. A 32-bit, 33MHz PCI v.2.2-compliant device with burst transfers up to
132Mbytes/sec, the PCI 9030 delivers high performance to new PCI-based adapters and those migrating from legacy designs. The device's 60MHz local bus, 3V/5V operation, and programmable general-purpose I/Os (GPIOs) and
chip selects bring unprecedented flexibility to a wide variety of memory and I/O devices. The combination of these features make adapters used in high-bandwidth applications, such as telecommunications and data communications
interface cards, easier than ever to design.
• PCI Target Read Ahead Mode
• PCI v2.2 compliant 32-bit 33MHz Target Interface Chip enabling PCI Burst
• PCI Target Programmable Burst
• Transfers up to 132Mbytes/second.
• Up to 60MHz Local Bus operation enabling burst transfers up to 240Mbytes/second
PCI 9052 Target I/O Accelerator for Generic and ISA Local Bus Designs
9030 Performance Features:
• PCI Target Delayed Write
• Posted Memory Writes
The PCI 9052 provides low cost connectivity for PCI slave designs. It is specifically targeted at easing the transition of existing ISA designs to the more feature rich and performance oriented PCI bus. The PCI 9052 provides direct
slave PCI functions by interfacing the adapter's I/O circuitry (control, address and data lines) to a host computer's microprocessor / memory architecture via the 32-bit PCI bus, which typically runs at 33 MHz.
9052 Performance Features:
• 32-bit, 33MHz PCI r2.1 compliant
• Up to 40MHz local bus operation
• ISA and Generic 32-bit, 40MHz local bus designs
MOUSER
STOCK NO.
PCI 9030
862-PCI9030-AA60PI-F
862-PCI9030-AA60BI-F
862-PCI9030RDK-LITE
PCI 9052
862-PCI9052-G
862-PCI9052RDK-LITE
• Glueless ISA interface for low cost adapters
• Supports multiplexed and non-multiplexed 8-, 16-,
• PCI unlimited bursts transfers at up to 132MB/s
• Direct slave data transfers
& 32-bit generic local buses
• 5V CMOS in 160-pin PQFP package
PLX
Part No.
For quantities greater than listed, call for quote.
Price Each
Description
1
50
100
PCI9030-AA60PI-F
PCI9030-AA60BI-F
PCI9030RDK-LITE
PCI 3V SMARTarget I/O Accelerator (176 Pin PQFP) (Lead-Free)
PCI 3V SMARTarget I/O Accelerator (180 Pin ÌBGA) (Lead-Free)
PCI 9030 Reference Design kit
36.19
39.39
392.50
33.98
36.98
-
31.84
34.65
-
PCI9052-G
PCI9052RDK-LITE
PCI 5V I/O Accelerator (160 Pin PQFP) (Lead-Free)
PCI 9052 Reference Design kit
37.42
333.70
35.13
-
32.84
-
PCI-LOCALBUS 32-BIT MASTER I/O ACCELERATORS
PCI 9054 Bus Master I/O Accelerator Chip
The PCI 9054 is a next generation 32-bit PCI bus mastering interface chip that seamlessly connects to and takes full advantage of Motorola's MPC860 PowerQUICC® and MPC850 microprocessors. The PCI 9054 I/O Accelerator,
the industry's first CompactPCI® Hot Swap Friendly PCI interface chip, expands PLX's 32-bit PCI product line for CompactPCI® and PCI-based telecommunications, networking and other high-bandwidth systems.
9054 Performance Features:
• PCI v2.2 compliant 32-bit 33MHz Bus Master Interface Controller enables PCI Burst Transfers up to 132Mbytes/second
• General Purpose Bus Master Interface featuring an advanced Data Pip Architecture™ which includes two DMA engines,
pro-grammable Target and Initiator data transfer modes and PCI messaging functions
• PCI v2.2 Power Management Spec compatible
• PCI v2.2 Vital Product Data (VPD) configuration support
PCI 9056 Master Chip I/O Accelerator Chip
The PCI 9056 Master Chip -- 32-bit, 66MHz PCI I/O accelerator is the most advanced, 32-bit general-purpose bus mastering device available for Motorola MPC850/860 PowerQUICC and generic 32-bit, 66MHz local bus based
designs. The PCI 9056 incorporates PLX’s industry leading Data Pipe Architecture technology, featuring DMA engines, programmable Direct Master and Direct Slave data transfer modes, and PCI messaging functions.
9056 Performance Features:
• 32-bit, 66MHz PCI r2.2 compliant
• Motorola PowerQUICC and generic 32-bit, 66MHz local bus modes
• 3.3V I/O, 5V tolerant bus interfaces
MOUSER
STOCK NO.
PCI9054
862-PCI9054-AC50BI-F
862-PCI9054-AC50PI-F
862-PCI9054RDK-LITE
PCI9056
862-PCI9056-BA66BI-G
862-PCI9056-BA66BI
862-PCI9056RDK-LITE
• PICMG 2.1 r2.0 Hot Swap Silicon
• 256-ball, 17 x 17mm, 1.00mm fine pitch PBGA (FPBGA)
• PCI bus bursts to 264MB/sec
• Local bus bursts to 264MB/sec
PLX
Part No.
For quantities greater than listed, call for quote.
Price Each
Description
1
50
100
PCI9054-AC50BI-F
PCI 9054-AC50PI-F
PCI9054RDK-LITE
PCI to Local Bus Master I/O Accelerator Chip PBGA Package (Lead-Free)
PCI to Local Bus Master I/O Accerlerator Chip PQFP Package (Lead-Free)
PCI 9054 Rapid Development Kit
54.40
76.65
524.75
51.07
71.91
-
47.86
67.17
-
PCI9056-BA66BI-G
PCI9056-BA66BI
PCI9056RDK-LITE
66MHz PCI Bus Mastering I/O Accelerator for Motorola PowerQUICC (Lead-Free)
32-bit 66MHz PCI BUS Mastering I/O
PCI 9056 Rapid Development Kit
57.79
63.17
524.75
54.24
59.26
-
50.83
55.35
-
PCI 9080 I2O Compatible PCI Bus Master I/O Accelerator Chip
The PCI 9080 Master Chip is the standard in PCI I/O Accelerators. It incorporates all the features of the PCI 9060 Family of PCI products, while adding the options and features needed to keep ahead of the ever changing technology
treadmill associated with PCI. In addition to providing the first processor independent I20 compliant messaging unit, the PCI 9080 is one of the first PCI interface chips to operate at both 3.3V and 5V.
862-PCI9080-3-G
PCI9080-3-G
66MHz PCI Bus Mastering I/O Accelerator for PowerQUICC (Lead-Free)
81.85
76.76
71.68
PCI-LOCALBUS 64-BIT MASTER I/O ACCELERATORS
The PCI 9656 64-bit, 66MHz PCI I/O accelerator is the most advanced, general-purpose bus mastering device available for Motorola MPC850/860 PowerQUICC and generic 32-bit, 66MHz local bus based designs. The PCI 9656
incorporates PLX’s industry leading Data Pipe Architecture technology, featuring DMA engines, programmable Direct Master and Direct Slave data transfer modes, and PCI messaging functions.
Features:
• 64-bit, 66MHz PCI r2.2 compliant
• Motorola PowerQUICC and generic 32-bit, 66MHz local bus modes
• 3.3V I/O, 5V tolerant bus interfaces
• PICMG 2.1 r2.0 Hot Swap Silicon
• 272-ball, 27 x 27mm, 1.27mm pitch PBGA
MOUSER
STOCK NO.
862-PCI9656-BA66BI-G
862-PCI9656-BA66BI
862-PCI9656RDK-LITE
• Zero wait state burst operation PCI bus bursts to 528 MB/sec
Local bus bursts to 264MB/sec
• 2 DMA Channels Block and Scatter/Gather transfers DMA descriptor ring
management Demand Mode and EOT Hardware controls GA
• PCI D3COLD Power Management Event (PME) generation support
PLX
Part No.
• I2O r1.5 messaging unit
• Eight mailbox and two doorbell registers
• PCI arbiter supports 7 external masters
• Host mode reset/interrupt signal configuration
For quantities greater than listed, call for quote.
Price Each
Description
PCI 9656-BA66BI-G
PCI 9656-BA66BI
PCI 9656RDK-LITE
66MHz PCI Bus Mastering I/O Accelerator for PowerQUICC (Lead-Free)
66MHz PCI Bus Mastering I/O Accelerator for PowerQUICC
PCI 9656 Rapid Development Kit
1
69.41
75.76
524.75
50
65.16
71.06
-
100
61.06
66.36
-
NETCHIP™ 227x 16-BIT USB 2.0 HIGH-SPEED PROGRAMMABLE PERIPHERAL CONTROLLER
NetChip’s NET2270 16-bit USB 2.0 high-speed programmable peripheral controller is optimized for single or bi-directional data transfer devices such as printers, scanners, digital cameras, mass storage,
and audio products. NET2270, the latest addition to our General Purpose USB Peripheral Controller family, complements our flagship, world’s first NET2290 32-bit USB 2.0 highspeed peripheral controller.
862-NET2270-3B-LF
862-NET2272-1A-LF
862-NET2272-1A-BCF
862-NET2272RDK-II
NET2270REV3B-LF
NET2272REV1A-LF
NET2272REV1A-BC F
NET2272RDK-II
Local Bus to USB 2.0 High Speed Peripheral Controller - 10x10mm 64-Pin TQFP Package
Local Bus to USB 2.0 High Speed Peripheral Controller – 10x10mm 64-Pin TQFP Package
Local Bus to USB 2.0 High Speed Peripheral Controller – 6x6mm 64-Ball BGA Package
NET2272 RAPID Development Kit
For quantities greater than listed, call for quote.
12.59
11.48
11.48
261.20
11.88
10.80
10.80
-
11.05
10.10
10.11
-
NETCHIP™ 2282 USB HIGH-SPEED PERIPHERAL CONTROLLER
The NetChip™ NET 2282 PCI to USB 2.0 Hi-Speed Peripheral Controller is designed for easy integration with existing PCI-based systems and silicon. While there are many PCI-based USB
Hosts on the market, the NET 2282 is one of the only PCI-based USB Peripheral Controllers available.
For quantities greater than listed, call for quote.
862-NET2282-AB33PCF
© Copyright 2012 Mouser Electronics
366
NET2282-AB33PCF
mouser.com/plxtechnology
PCI to High-Speed USB 2.0 Controller, 14 x 14mm TQFP (Lead-Free)
14.97
(800) 346-6873
14.06
13.16
© Copyright 2012 Mouser Electronics