USB 3.0 to SATA Hard Drive with SD reader Enclosure - 2.5

USB 3.0 to SATA Hard Drive
with SD reader Enclosure - 2.5"
User Reference Guide
Introduction
The USB 3.0 to SATA Hard Drive with SD Reader
Enclosure - 2.5" is a combination of 2.5" SATA
HDD/SSD enclosure and SD/MicroSD memory
card reader which enables you to access your data
through a single USB connection.
LOT Number Sticker
For future product return or exchange, this LOT
number is required. Please keep it for your reference.
LOT Number
04-1023A
Part Number
1
Key Features and Benefits
•
•
•
•
•
•
•
2
All-in-one 2.5" SATA HDD/SSD enclosure
and SD/MicroSD memory card reader, easily
access various storage media through a
single USB connection
Compatible with 9.5mm and 7mm height
2.5" SATA I/ II/ III drives
Supports SuperSpeed USB 3.0 data transfer
rates up to 5Gb/s with UASP for optimal
performance
Memory card reader supports SDHC
(UHS-I), SDXC (UHS-I), microSD (T-Flash),
microSDHC (UHS-I), and microSDXC
(UHS-I) flash memory cards
Tool-less hard drive installation, low profile
design provides great portability
Supports plug-n-play, hot-swappable and
backward compatible with USB 2.0/1.1
Built-in LED indicators for power and
memory card reader connection status
Specifications
Connectors
Source:
USB 3.0 Type-A (9-pin), Female
Device:
SATA data and power connector (7+15 pin), Female
Drive Type
SATA
Drive Size
2.5" (9.5mm/7mm)
Max Drive Capacity
Up to 4TB
Memory Card Types
SD/Micro SD (SDHC/SDXC)
#1 SD v1.0/ v1.1/ v2.0/ SDHC/ SDXC
#2 SD v3.01 UHS-I (Ultra High Speed): SDR12/
SDR25/ SDR50/ DDR50/ SDR104
Max Memory Card Capacity
Up to 2TB
Type and Data Transfer Rate
USB 3.0 (up to 5Gbps)
SATA III (up to 6Gbps)
Power
USB Bus-powered
Material of Housing
Plastic housing and Aluminum panel
Color
Black with blue panel
Dimensions
5.43" (W) x 0.51" (H) x 3.15" (D)
Weight
0.15 lbs
Package Contents
•
•
•
USB 3.0 to SATA Hard Drive with SD Reader
Enclosure - 2.5" (w/ protective silicon sleeve)
USB 3.0 Type A to Micro-B cable
User Reference Guide
3
System Requirements
•
•
•
•
Desktop or notebook computer with an
available USB port (USB 3.0 port
recommended)
Windows® 10 (32-/64-bit) / 8 (32-/64-bit) /
7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/
64-bit)
Windows Server 2003 & 2008 (32-/64-bit) /
2008 R2 / 2012 / 2012 R2
Mac OS X® v10.6.x or later
Layout
Protective silicon sleeve
SD card slot
Micro-SD card slot
Micro-B
Power / Card reader indicator
Figure 1: USB 3.0 to SATA Hard Drive with SD Reader Enclosure - 2.5
4
Hardware Installation
1.
2.
Take the included protective silicon sleeve
off, and turn the enclosure onto the back side.
Press and push forward to release the back
cover.
Figure 2
3.
Insert and connect your SATA 2.5" HDD or
SSD, line up the sata connector, then gently
insert the drive into the case.
Figure 3
Figure 4
5
4.
Align the latches on both covers, and push
the back cover down to close the enclosure.
Figure 5
5.
Attach the included protective silicon sleeve
to the enclosure.
Figure 6
6.
7.
8.
6
Connect the Micro-B port of the enclosure to
USB port of a computer using the included
USB cable.
Once the enclosure is detected, the driver will
install automatically. Now, it's ready for use.
Optional: Insert a SD card or microSD card
into the corresponding slot as needed.
Application
The USB 3.0 to SATA Hard Drive with SD Reader
Enclosure - 2.5" provides an ideal solution to easily
access your data. It includes a 2.5" SATA HDD/
SSD enclosure and SD or microSD memory card
reader through a single USB connection.
Note: Only one memory card can be inserted
at any one time.
Figure 7: Application
7
Blank Page
8
Blank Page
9
Blank Page
10
Technical Support and Warranty
QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with new
drivers and solutions. Answers to your questions could be just a few clicks away. You can
also submit questions online and a technical support analyst will promptly respond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for two (2) years from the date of purchase of the product. This warranty is
not transferable and is available only to the original purchaser of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having
similar features and functionality) the product if defective in materials or workmanship.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store where
you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps below
to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT
REPLACEMENT to submit a request to SIIG RMA or fax a request to
510-657-5962. Your RMA request will be processed, if the product is
determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
•
•
•
•
•
Properly pack the product for shipping. All accessories that came with the
original package must be included
Include a copy of your original sales receipt inside the package with date of
purchase and place of purchase circled and clearly visible
Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping carton
You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer
11
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including
Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge
the connection between Desktop/Notebook systems and external peripherals. SIIG continues
to grow by adding A/V and Digital Signage connectivity solutions to our extensive
portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features, and are
backed by an extensive manufacturer warranty. High quality control standards are evident
by the overall ease of installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be found in computer retail
stores, mail order catalogs, through major distributors, system integrators, VARs and
through e-commerce sites.
PRODUCT NAME
USB 3.0 to SATA Hard Drive with SD Reader Enclosure - 2.5"
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
USB 3.0 to SATA Hard Drive with SD Reader Enclosure - 2.5" is a trademark of SIIG, Inc. SIIG
and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication
are for identification only and may be trademarks of their respective owners.
July, 2016
Copyright © 2016 by SIIG, Inc. All rights reserved.