Anleitung für LokPilot mit mobile Station ENGL

Using „ mobile station “ with
ESU LokPilot 52600 / 52602
Using the Marklin item number 36330 you have the possibility to control all four function outputs of the
ESU LokPilot decoder and also have access to the decoder CVs through register programming.
In order to do that, please proceed the following way:
1. Press the menu button, choose NEW LOC
2. Confirm with the scroll wheel.
3. Scroll to DATABASE.
4. Confirm with the scroll wheel.
Picture 1
5. Choose item 36330 and confirm.
Picture 2
6. Now locomotive Ee 3/3 is active in the
display. You can now start to set changes
(locomotive name, locomotive symbol, CV
settings). Please follow your mobile station
manual.
Picture 3
7. You get access to the change menu
through scrolling to EDIT LOC. There you
can find all submenus to change different
parameters.
Picture 4
Using „mobile station“ with ESU LokPilot 52600 / 52602
March 2005
8. The register programming menu (REG)
allows you to change CV settings but not to
read out the programmed settings.
Picture 5
9. This is an example for setting register 4 to a
certain value (here 01).
Picture 6
10. The four function buttons at the left of the
display allow to activate all four function
outputs of LokPilot (see picture).
F1 = AUX1 Output
F2 = AUX2 Output
F3 = Shunting Mode
F4 = Acceleration/Deceleration on/off
Picture 7
Using „mobile station“ with ESU LokPilot 52600 / 52602
March 2005