CopperLink™ E1 Extender
Model 2113A
The CopperLink™ 2113A is a transparent, plug-and-play E1 Extender that solves the distance and wire
limitations of TDM technology by tripling the reach and halving the number of required wire pairs.
Triple the Distance
Extend E1s to nearly 5 km over one pair of wires.
Half the Wires
The E1 extender only needs one pair of wires
to operate.
atton’s Model 2113A E1 Extender is the
perfect choice for enterprises, integrators, and service providers needing to
extend E1 circuits beyond their typical reach
while conserving the number of wire pairs used.
Voice and Data Extension
The E1 Extender operates in clear channel mode
allowing the transparent passing of voice
and data.
With the CopperLink™ 2113A extender, zero
Plug and Play
transparent extension of data and voice bear-
Plug the 2113A in and the link comes up in seconds. The line interface is even polarity insensitive, making it easier to get running.
Line Tests
configuration is required. They operate in
clear-channel mode, thereby facilitating the
ing circuits. The two active pins on the RJ
connector are polarity insensitive, so you
don’t even need to worry about which wire
V.52 511/511E Pattern Generator with Remote
Digital Loopback (RDL); Local Analog
Loopback (LAL).
you connect on the line interface. Simply take
Front Panel Status Indicators
and the circuit will light up immediately!
them out of the box, put them on either side
The Model 2113A extends E1 circuits to
16,100 feet (4,900 meters, nearly 5 km). The
2113A requires only two wires (one pair) to
extend the TDM circuits,
thereby conserving and minimizing the copper plant
resources used.
For these reasons, the
Special Rates Available
Call for Details
CopperLink™ 2113A extender
is the ideal solution for most popular applications such as E1 backhaul from a remote site,
E1 relocation, E1 extension across a campus or
between buildings, and last-mile TDM delivery.
Visit www.patton.com for more information.
of the dry copper pair, connect your E1 device
Front panel LEDs provide users with quick feedback on unit operation.
AC or DC
power options
Dual 75-ohm
female BNC
Front panel indicators show
operational status at a glance
female RJ-48C
RJ-45 CopperLink port
Typical Applications
✔ The CopperLink™ simplifies transparent E1 extension.
✔ Plug-and-Play—units automatically link up when placed on opposite sides of a dry copper wire pair.
✔ Units operate in clear channel mode to easily transport voice and data.
✔ Uses only wires on the link.
✔ Link interface is polarity insensitive to make connection to the twisted-pair wires easy.
✔ Intuitive LEDs help you quickly troubleshoot line and circuit problems.
Up to 16,100 ft/4,900 m (E1)
over voice-grade twisted-pair
Model 2113A
Model 2113A
Main Office
Cell tower facility
Circuit Connector
Line Interface
Dual 75-Ohm female BNC and single 120-Ohm female
Female RJ-11 using pins 2 & 3 • Two wires (single
FCC Part 15A • CE Mark • EMC Directive 89/336/EEC •
Low-Voltage Directive 73/23/EEC
4.7 years
Supported Line Tests
V.52 511/511E Pattern Generator with RDL • LAL
CO unit preset for Network Clock • CPE unit preset for
Receive Recover
Front Panel Indicators
Operating Temp.: 32–122°F (0–50°C)
Humidity: 5–90% non-condensing
Power, Line, E1, Test, LOS (framing errors/clock slips)
Power Supply
4.7 x 1.52 x 5.0 in. (10.6 x 3.9 x 12.7 cm)
DIP switch
External power supply options: Universal 90–260 VAC
operating from 50–60 Hz • 120 VAC/60 Hz • 240
VAC/60Hz • -48 VDC
Line Coding
16-constellation TC-PAM
Patton is a registered trademark, and is a
trademark of Patton Electronics Company in
the United States and other countries.
Patton Electronics Co.
7622 Rickenbacker Drive
Gaithersburg, Maryland 20879
Phone +1 301 975 1000
Fax +1 301 869 9293
E-mail sales@patton.com
Web www.patton.com
PE-Inalp Networks Private Ltd
Old No. 14 and New No.6,
Brahadambal Road,
Nungambakkam High Road
Chennai: 600 034, India
Phone +91 44 45490395/6/7
Fax +91 44 4549.0394
Email sales@patton.co.in
Web www.patton.co.in
Patton-Inalp Networks AG
Meriedweg 7
CH-3172 Niederwangen
Phone +41 (31) 985 25 25
Fax +41 (31) 985 25 26
E-mail sales@inalp.com
Web www.inalp.com
Download PDF
Similar pages