stainless hi-output duals stainless hi-output 2-into

JUNE 2012
VANCE & HINES
There is likely not another aftermarket exhaust
manufacturer anywhere that is more on top of, and able
to react to, the changes at The Motor Company than the
folks here at Vance & Hines. With their in-house design,
testing and manufacturing facilities all located in So-Cal,
they are able to have their most in-demand exhausts
ready to go for all the latest models (like those below for
2012) at almost the same time as the bikes roll off the
assembly line. Show your customers you’re on top of all
that’s new with Vance & Hines.
STAINLESS
HI-OUTPUT DUALS
•Engineered for high output engine modifications
•Dyno developed and tested to increase volumetric efficiency
critical to extracting maximum horsepower from high output
engine modifications
•Matches tapered headpipes with larger inlet mufflers
•13/4” to 2” tapered headpipes with 2” inlet on mufflers and 4”
to 41/2” stepped muffler body
•3” to 31/4” baffle with anti-reversion cone
•All stainless steel construction with TIG welding and raceinspired brushed stainless “Works” finish
•Contoured laser-cut heat shields
•Flat plane 12mm and quick access 18mm oxygen sensor ports
for wideband tuning capability
•Made in the U.S.A.
PART #
DESCRIPTION
1800-1492
For 09-12 FLT, FLHT, FLHR, FLHX, FLTR models
SUG. RETAIL
$1,749.95
STAINLESS HI-OUTPUT 2-INTO-1
•Engineered for high output engine modifications
•Dyno developed and tested to increase volumetric efficiency
critical to extracting maximum horsepower from high
output engine modifications
•13/4” to 2” tapered headpipes with 21/2” inlet to megaphone
and 4” to 41/2” stepped muffler body
•3” to 31/4” baffle with anti-reversion cone
•All stainless steel construction with TIG welding and raceinspired brushed stainless “Works” finish
•Contoured laser-cut heat shields
•Flat plane 12mm and quick access 18mm oxygen sensor
ports for wideband tuning capability
•Made in the U.S.A.
PART #
DESCRIPTION
1800-1491
For 09-12 FLT, FLHT, FLHR, FLHX, FLTR models
SUG. RETAIL
$999.95
BIG RADIUS 2-INTO-1
•Traditionally viewed as the kind of pipe merely designed
for performance, Big Radius 2-into-1 breaks the mold,
delivering white-knuckle performance with the style that
has won over the motorcycle public
•Incorporating blue-proof technology across the entire
length of the pipe, Big Radius 2-into-1 will keep its
showroom finish whether at the dragstrip or on
the boulevard
•New flat plane mounting panel for the 12mm oxygen
sensors now featured across the Softail model line;
mounting panel positions sensor deeper into exhaust
stream, providing enhanced data feedback to the ECM
•Includes mounts for factory O2 sensors as required
•Made in the U.S.A.
PART #
FOR 12 FXS/FLST MODELS
1800-1482
DESCRIPTION
1800-1482
SUG. RETAIL
Chrome
1800-1483
PART #
DESCRIPTION
FOR 12 FXS/FLST MODELS (CONT)
$724.95
1800-1483
SUG. RETAIL
Black
$824.95
PRO PIPE
•Pro Pipe provides all the bling along with the bang
•Includes tuned length stepped headers with a highly efficient
1861-0793
merge collector that feeds into the stepped megaphone design
•Complete with header and collector heat shields, as well as a shield over the first step of the
megaphone; also features a CNC-machined chrome plated billet end cap
•New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12 Dyna
model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data
feedback to the ECM
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 12 DYNA MODELS (EXCEPT 12 FLD)
1800-1493
Chrome
$604.95
31/2”
POWER-TOUR
MUFFLERS
•31/2” diameter
mufflers with black
ceramic finish
•Great sound and
increased performance
•Work with stock or
modified engines
•Available in Power-Tour
performance style
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 12 DYNA MODELS (EXCEPT 12 FLD) (CONT)
1861-0793
Opt. quiet baffle
1801-0596
SPO® OVAL
SLIP-ON
MUFFLERS
1801-0597
PART #
DESCRIPTION
SUG. RETAIL
FOR 95-12 FLT, FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE MODELS WITH DUAL EXHAUST
1801-0596
1801-0597
1800-1493
$95.95
Slash-down
W/ chrome billet end caps
$500.00
629.95
•Newly restyled
S&S SPO® mufflers
•Same great performance as S&S performance oval slip-ons, but
feature sculpted alloy end-caps with chrome finish
•Muffler features double-walled construction, dual-layer
wrapping and quality black ceramic finish
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
1801-0595
For 95-12 FLT, FLHT, FLHR, FLHX and
FLTR models w/ dual exhaust
SUG. RETAIL
$899.95
POWER TRUE
DUALS HEADERS
•Independent dual look with “under the
bike” cross-over
•Hidden crossover passage between front and rear
pipes for maximum performance
•Full black ceramic heat shield with
220° coverage
•Compatible with 95-12 style slip-on
Dresser mufflers
•Made in the U.S.A
PART #
DESCRIPTION
1802-02511
1802-02502
For 09-12 FLHT, FLHR, FLHX, FLTR models
For 99-08 FLT, FLHT, FLHR, FLHX, FLTR models
1Has
12mm and 18mm sensor ports and plugs.
2Has 18mm sensor ports and plugs.
2
1802-0251
PINION SHAFT BEARING
•Sold each
SUG. RETAIL
$624.95
624.95
PART #
DESCRIPTION
0924-0236 For all 00-07 Twin
Cam models; repl.
OEM #24604-00D
SUG.
RETAIL
$50.95
CARL BROUHARD AND DRAG SPECIALTIES
When you see the Drag Specialties name
right next to that of Carl Brouhard, you know that you can
expect great things. The Brouhard mantra of, “V-Twin Art
In Motion” means masterful creations that function as well as they look. Combine that
with our Drag Specialties reputation for quality, service, value and in-stock reliability and
you have parts and accessories that are very hard to beat. Keep watching here and in our
catalogs for all of our latest offerings.
CROSS IGNITION
SWITCH COVERS
•Covers the unsightly stock ignition
switch with stand-out, custom style
•Constructed of 6061 T-6
billet aluminum
•Easy to install
•Available in chrome or blackanodized finish
•Made in the U.S.A.
PART #
FOR 93-06 FLHT, FLTR
2106-0173
2106-0174
BRAKE PEDAL
ADAPTERS
2106-0173
DESCRIPTION
2106-0174
SUG. RETAIL
Black
Chrome
$85.95
85.95
•Required when mounting
a Brouhard brake pedal
pad to a Brouhard brake arm
1610-0262
1610-0261
•Can also be used for mounting a Brouhard
brake pedal cover on other brake arms that have removable toe pegs
•Made in the U.S.A.
PART #
DESCRIPTION
1610-0261
1610-0262
Black
Chrome
SUG. RETAIL
$69.95
69.95
0940-1053
0940-1048
STRAIGHT CUT POINTS COVERS
•Billet aluminum construction with machined highlights
0940-1047
•Available in chrome or with a gloss black powder coat finish
•Includes gasket and mounting hardware
•Design matches other Drag Specialties/Carl Brouhard products
PART #
FOR 99-12 TWIN CAM
DESCRIPTION
SUG. RETAIL
0940-1048
0940-1049
Chrome
Gloss black
$49.95
49.95
0940-1047
Gloss black
49.95
FOR 84-99 BIG TWIN, 75-12 XL, 70-84 SHOVELHEAD MODELS
0940-1050
STRAIGHT-CUT DERBY COVERS
•Billet aluminum construction with machined highlights
•Available in chrome or gloss black powder coat finish with
re-machined highlights
•Includes gasket and mounting hardware
•Design matches other Drag Specialties/Carl Brouhard products
PART #
FOR 99-12 TWIN CAM
DESCRIPTION
SUG. RETAIL
0940-1052
0940-1053
Chrome
Gloss black
$99.95
99.95
0940-1050
0940-1051
Chrome
Gloss black
89.95
89.95
FOR 84-98 BIG TWIN, 70-84 SHOVELHEAD
0703-0392
0703-0391
STRAIGHT-CUT GAS CAPS
•Billet aluminum construction with machined highlights
•Available in vented, non-vented and dummy snap-in styles
•Dummy snap-in cap replaces the left-side fuel gauge to give a balanced look
to a twin cap fuel tank
•Design matches other Drag Specialties/Carl Brouhard products
PART #
DESCRIPTION
FOR L96-12 H-D MODELS
0703-0392
0703-0393
0703-0394
0703-0395
SUG.
RETAIL
Chrome, vented
$56.95
Gloss black, vented
56.95
Chrome, non-vented 56.95
Gloss black,
non-vented
56.95
0703-0396 Chrome,
dummy snap-in
56.95
SUG.
PART #
DESCRIPTION
RETAIL
FOR L96-12 H-D MODELS (CONT)
0703-0397 Gloss black,
dummy snap-in
FOR 84-E96 H-D MODELS
0703-0388
0703-0389
0703-0390
0703-0391
Chrome, vented
Gloss black, vented
Chrome, non-vented
Gloss black,
non-vented
$56.95
56.95
56.95
56.95
56.95
STRAIGHT-CUT
AIR CLEANER INSERTS
1014-0114
1014-0115
•Billet aluminum with machined highlights
•Available in chrome or gloss black powdercoat finish
•Include mounting hardware
•Design matches other Drag Specialties/Carl Brouhard products
PART #
DESCRIPTION
SUG. RETAIL
FOR 99-12 TWIN CAM W/ STOCK AIR CLEANER COVER (EXCEPT 08-12 DYNA)
1014-0114
1014-0115
Chrome
Gloss black/re-machined
$76.95
76.95
3
DRAG SPECIALTIES SEATS
Many of the newest seats rolling out of our Drag Specialties
Seat Division are for some of the oldest bikes rolling. These
are seats that include all the fine features, materials and
Made-In-The-USA quality of our seats for late-model V-Twins,
but in versions to perfectly complement those bikes you find
in the OldBook™. Your riders with classic bikes will thank
you for introducing them to seats loaded with features and
style they never thought were available for their rides.
0805-0085
0805-0078
0805-0079
0805-0086
0805-0084
0805-0081
0805-0080
0805-0086
0805-0085
0805-0083
0805-0082
WIDE SOLO SEATS
Removable
fringe
•Wide solo seats available with or without removable leather fringe
•Feature automotive-grade vinyl in seating areas and on sides
•Studs are brass nickel and will not rust
•Molded polyurethane foam
•3/16” ABS thermoformed seat base for a perfect fit
•Rubber bumpers and fully carpeted bottom to protect paint
•Pillion pad bolts to front seat to create a single base (sold separately)
•Fit all Drag and most H-D sissy bars
•Include all mounting hardware
•Made in the U.S.A.
FOR 58-84 FX/FL/FLH, 80-84 FXWG
PART #
DESCRIPTION
SEATS (211/2” L OVERALL X 12” W FRONT X 2” H)
0805-0078
0805-0079
0805-0080
0805-0081
0805-0082
4
Smooth
Flame stitch
Scorpion stitch
Smooth w/ removable fringe
Flame stitch w/ removable fringe
SUG. RETAIL
$219.95
239.95
239.95
249.95
254.95
PART #
DESCRIPTION
SEATS (211/2” L OVERALL X 12” W FRONT X 2” H) (CONT)
0805-0083
Scorpion stitch w/ removable fringe
0805-0084
0805-0085
0805-0086
Smooth
Flame stitch
Scorpion stitch
PILLION PADS (103/4” L OVERALL X 51/2” W FRONT X 21/2” H)
SUG. RETAIL
$254.95
99.95
109.95
109.95
0822-0173
0822-0172
0805-0093
0805-0093
0805-0094
0822-0174
0822-0176
0822-0175
0805-0095
0805-0096
0805-0097
MINI KING AND QUEEN SEATS AND SISSY BAR PADS
SEATS
•New retro styling with improved fit
•Automotive-grade vinyl on sides and seating area
•Molded polyurethane foam
•3/16” ABS thermoformed seat base
•Fully carpeted bottom and rubber bumpers to protect paint
•Fit with all Drag Specialties sissy bars and most H-D bars
•Matching sissy bar pads (sold separately) mate together for a tall backed seat appearance
•Made in the U.S.A.
SISSY BAR PADS
0822-0172
•Automotive-grade vinyl
•Designed to match Mini King and Queen seats
•Sissy bar pads will also work with other seats as well
•Fit with all tall, round and square Drag Specialties sissy bars and most H-D bars with 4” (+/- 1/8”) wide
inside dimension
•May not fit in sissy bars with die cast inserts
•Include all mounting hardware
NOTE: All Drag Specialties seats and sissy bars are designed to function together, unless otherwise noted.
FOR 58-84 FX, FL, FLH
PART #
SEATS (29” L OVERALL X 10” W FRONT X 6” W REAR X 13/4” H)
DESCRIPTION
SUG. RETAIL
0805-0093
0805-0094
0805-0095
0805-0096
0805-0097
Scorpion stitch
Flame stitch
Diamond stitch
Diamond red velvet
Diamond blue velvet
$309.95
299.95
309.95
314.95
314.95
0822-0172
0822-0173
0822-0174
0822-0175
0822-0176
Scorpion stitch
Flame stitch
Diamond stitch
Diamond red velvet
Diamond blue velvet
64.95
64.95
64.95
64.95
64.95
SISSY BAR PADS (10” TALL X 51/8” W X 21/4” THICK)
5
PROGRAMMABLE MINI ELECTRONIC
SPEEDOMETERS WITH ODOMETER/TRIP METER
•Programmable with any sending unit that sends 3,000 – 90,000 pulses per mile
•Available a polished or matte black finish in 1.87” or
2.4” diameter metal housing with a black or white gauge face
•Features a 12V LED backlit display
•Digital odometer has two resettable trip meters
•Remote single-button switch allows easy changing between odometer and trip meter
•Compatible with all 95-03 OEM sensors and most aftermarket sensors
•Matching tachometer sold separately
PART #
1.87” SPEEDOMETERS
2210-0260
2210-0259
DESCRIPTION
SUG. RETAIL
White face
Black face
$129.95
129.95
2210-0257
2210-0260
PART #
2.4” SPEEDOMETERS
DESCRIPTION
2210-0258
2210-0257
SUG. RETAIL
White face
Black face
$129.95
129.95
2211-0125
2.4” MINI
ELECTRONIC
TACHOMETERS
2211-0126
17/8” ELECTRONIC TACHOMETERS
•Smooth function, long-lasting construction
•Matte black finish
•Features orange indicator needle w/ LED backlighting
•Water resistant housing
•Matching speedometers sold separately
NOTE: T
ach adapter required for single-fire
ignitions (Pre-04 models only).
NOTE: Installing an electronic tachometer on
04-12 models will require the use of
PART #2211-0030.
PART #
DESCRIPTION
2211-0125
2211-0126
Black face w/ orange needle
White face w/ orange needle
2211-0124
2211-0123
•Smooth function, longlasting electronics
•Matte black finish
•Backlit with long lasting LEDs
•Water-resistant housing
•Fits 2.375”/2.4” mini gauge mounts
•Matching speedometer sold separately
NOTE: Tach adapter required for single-fire ignitions (Pre 04 Models only).
SUG. RETAIL
$99.95
99.95
NOTE: Installing an electronic tachometer on 04-12 models
will require the use of PART #2211-0030.
PART #
DESCRIPTION
2211-0123
2211-0124
Black face
White face
SUG. RETAIL
$99.95
99.95
2.4” MINI ELECTRONIC TACHOMETER
•12V, 9000 rpm
•Features a black case and stainless steel bezel with a black face
•113/16” on-center studs
•Simple wire connection is all that is needed
•No tach adapters required
•Can use mounting bracket PART #2211-0118 for a clean installation on most
FXD and XL models with handlebar mounted speedometer
2.4” MINI TACHOMETER GAUGE MOUNT
NOTE: Will not work on earlier models that do not have a crank position sensor.
•Mounts the tach to the OEM speedometer
•Replaces the OEM gauge backing plate
•Includes all required hardware and instructions
•Black powder-coated finish to match the OEM gauge color
•Accepts all Drag Specialties 2.4” mini electronic tachometers
PART #
DESCRIPTION
PART #
DESCRIPTION
2211-0117
For most 04-12 Big Twin and XL models
2211-0118
For most 96-12 XL and FXD models
SUG. RETAIL
$216.95
•High quality replacement bushings
•Sold in 4-pack
DESCRIPTION
2320-0102
For 94-12 FLHR/C and 00-12 FLSTC;
repl. OEM #67621-94
6
$119.95
REPLACEMENT BUSHINGS
FOR OEM DETACHABLE
DOCKING HARDWARE
REPLACEMENT BUSHINGS FOR
OEM DETACHABLE WINDSHIELD
PART #
SUG. RETAIL
•1” diameter, .343” hole, .125” slot
•Sold in 2-pack
SUG. RETAIL
$19.95
PART #
DESCRIPTION
1501-0404
Docking hardware bushings;
repl. OEM #53123-96
SUG. RETAIL
$13.95
2040-1073
2040-1075
2040-1070
2040-1072
VIZOR LIGHTS™
2040-1074
2040-1076
LAZER STAR RIGID MOUNT LED
TURN SIGNALS
•Machined from 6061 T-6 aluminum
•Available in black anodized finish with Pyrex® glass lenses with triple
O-ring seals
•Lights feature single filament 20W halogen bulbs or dual-function LEDs
•Rigid mount features a hollow stud to conceal the wiring for a
clean installation
•Micro “B” Point lights are 31/2” L x 19/16” dia.
•”XS” Point lights are 25/8” L x 13/16” dia.
•Made in the U.S.A.; sold in pairs
NOTE: All rigid mount lights have 5/16”-24 x 11/2” mounting bolts.
NOTE: LED lights require a Load Equalizer when replacing OEM turn signals.
PART #
DESCRIPTION
BLACK ANODIZED MICRO “B” POINT TURN SIGNALS
SUG. RETAIL
PART #
DESCRIPTION
BLACK ANODIZED “XS” POINT TURN SIGNALS
SUG. RETAIL
2040-1073
2040-1074
2040-1075
2040-1076
Amber
Red
Amber
Red
•High-quality black anodized die-cast
aluminum housings
•Available with single-element 20W halogen
bulbs or single-function LEDs
•Halogen lights come with red and amber
2040-1071
Dichroic prism mirrored lenses and O-ring seal
5
•Wiring is routed through the /16”-24 x 1” mounting bolt for a
clean appearance
•Visor can be adjusted 360° for endless mounting positions
•Available in small (27/8” L x 13/4” dia.)
•Sold in pairs
PART #
HALOGEN VIZOR LIGHTS
DESCRIPTION
SUG. RETAIL
2040-1072
Small
$89.95
2040-1070
2040-1071
Small w/ amber LED
Small w/ red LED
119.95
119.95
LED VIZOR LIGHTS
1701-0491
1701-0492
$256.95
256.95
$239.95
239.95
1701-0450
BILLET BRAKE
CALIPER HOUSINGS
•Get the look you want at a
fraction of the cost
•Accept the original OEM pistons,
pads and internal hardware
•Direct bolt on to existing fork legs or
1701-0451
caliper brackets
•Available in chrome or black anodized finish
•Right- and left-side housings must be purchased separately
•Made in the U.S.A.
1701-0485
1701-0480
CALIPER HOUSINGS
PART #
DESCRIPTION
FOR 08-12 FXST, FLST, FXD (LEFT FRONT)
•Precision-machined from
billet aluminum
1701-0482
•Four-piston, dual-action design for
positive stopping power
•Available in chrome and Contrast
Cut™ finishes
•Contrast Cut starts with a polished caliper that has been black anodized
and then recut to open the design
•Includes mounting bracket, brake pads, bleeder screw and 3/8”-24
banjo bolt
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 05-12 XL (125 X 4RSPH CALIPER)
SUG. RETAIL
1701-0480
1701-0479
11.5” rotor, chrome
11.5” rotor, Contrast Cut
$499.95
499.95
1701-0485
1701-0484
11.5” rotor, chrome
11.5” rotor, Contrast Cut
549.95
549.95
FOR 00-04 XL (137 X 4B CALIPER)
FOR 84-99 XL, XLH, XLS (125 X 4RSPH CALIPER)
1701-0482
1701-0491
1701-0492
Chrome
Black
$199.95
199.95
1701-0493
1701-0494
Chrome
Black
199.95
199.95
1701-0449
1701-0450
Chrome
Black
199.95
199.95
1701-0451
1701-0452
Chrome
Black
199.95
199.95
1701-0495
1701-0496
Chrome
Black
199.95
199.95
1701-0489
1701-0490
Chrome
Black
199.95
199.95
FOR 08-12 FXST, FLST, FXD (REAR)
CLASSIC REAR
CALIPER KITS
11.5” rotor, Contrast Cut
499.95
SUG. RETAIL
FOR 08-12 FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE (LEFT FRONT)
FOR 08-12 FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE (RIGHT FRONT)
FOR 07-12 XL (LEFT FRONT)
FOR 08-12 XL (REAR)
SEAL KITS
PART #
1702-0156
1702-0157
1702-0146
1702-0158
1702-0159
DESCRIPTION
For 08-12 FXST, FLST, FXD (front)
For 08-12 FXST, FLST, FXD (rear)
For 08-12 FLHT, FLHR, FLHX, FLTR and
H-D FL Trike (front)
For 07-12 XL (front)
For 08-12 XL (rear)
SUG. RETAIL
$19.95
19.95
19.95
19.95
19.95
7
MEMPHIS SHADES
Memphis Shades set the windshield world on fire with their
cutting edge gradient tints and innovative quick change
mounting hardware. They continue to roll with the latest
applications for all of their shields, but there is also a new
focus on some of the hottest fairings you will find anywhere
– The Batwing and The Bullet. And yes, these fairings
feature the same on-and-off ease as the windshield lineup so riders can change the look and feel of their bike in a
matter of seconds.
MEMPHIS SHADES BULLET FAIRING FX
2330-0093
•The new FX Series Bullet Fairing is now available; top portion features a smoked windscreen and bottom portion
features a matte black finish inside and a Class A gloss-black finish outside
•Looks like a two-piece but is actually a strong, one-piece fairing constructed of high-impact aircraft grade Lucite
•Bold aerodynamic shape with a hint of outlaw styling designed to streamline today’s low-slung cruisers
•Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of
the countryside
•”Factory” finish looks great as is or can easily be painted to really achieve the next level of custom
•Custom fit, model-specific mounting kits feature Memphis Shades exclusive Trigger-Lock mounting system – on
and off without tools, or swap out with Memphis Fats/Slim windshields, Sportshields or Batwing Fairing by
purchasing a plate-only mount kit
DESCRIPTION
BULLET
FAIRING FX
TRIGGER-LOCK
MOUNTING KIT BLACK
PLATE-ONLY
MOUNT KIT BLACK
For VRSCD 06-08
For VRSCDX 07-11
2330-0093
2330-0093
2320-0107
2320-0107
2320-0108
2320-0108
PART #
BULLET FAIRING FX
SUG. RETAIL
2330-0093
$149.95
PART #
TRIGGER-LOCK MOUNT KITS
SUG. RETAIL
2320-0107
$142.95
PART #
PLATE-ONLY MOUNT KITS
2320-0108
SUG. RETAIL
$62.95
2330-0092
MEMPHIS SHADES
BATWING FAIRING
•The clean aerodynamic shape and innovative mounting
system easily enhances the style and comfort of your ride
•Inner fairing structure is black textured ABS
•Fairing outer shell is opaque black Lucite® with a class A
finish that looks great as is or can easily be painted
•Memphis Shades exclusive No-Tool Trigger-Lock mount kits
feature a detach system that allows you to quickly and
2320-0031
easily remove or install your fairing
•Trigger-Lock kits are available in a combination
of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors or black
E-coated plates, bolts and anchors for a clean appearance that’s built to last
•Fairing is predrilled and fitted with push-out hole plugs for easy wind
deflector installation
•Made in the U.S.A.
NOTE: B
atwing Fairing is not compatible with any other fairing windshields, wind deflectors
or accessories.
NOTE: M
odels listed that already have a Memphis Fats or Slims windshield installed can use
their existing Trigger-Lock mount kit to install a Batwing Fairing, or purchase a plateonly kit (black or polished aluminum) and switch back-and-forth from Fats, Slim or
Sportshield windshield to Batwing Fairing.
WHAT TO ORDER
1. BATWING FAIRING
2. TRIGGER-LOCK MOUNT KIT SPECIFIC TO BIKE MODEL
DESCRIPTION
BATWING FAIRING
TRIGGER-LOCK MOUNT KITS
POLISHED
BLACK
PLATE-ONLY KITS
POLISHED
BLACK
For 08-12 FXDF
2330-00921
2320-0031
2320-0039
1Requires
PART #
BATWING FAIRING
2330-0092
TRIGGER-LOCK MOUNT KITS
2320-0031
8
2320-0084
2320-0068
relocation of front turn signals.
SUG. RETAIL
$279.95
142.95
PART #
TRIGGER-LOCK MOUNT KITS (CONT)
SUG. RETAIL
2320-0084
$142.95
2320-0039
62.95
PLATE-ONLY KITS
PART #
PLATE-ONLY KITS (CONT)
2320-0068
SUG. RETAIL
$62.95
2330-0094
MEMPHIS SHADES GAUNTLET FAIRING
•Gauntlet Fairing is a unitized quarter fairing with a matte black finish inside
•Class A gloss black finish outside
•Smoked windscreen
•ABS headlight bezel
•”Factory” finish looks great as is or can easily be painted to really achieve the next level
of custom
•Custom fit, model-specific mounting kits feature Memphis Shades exclusive TriggerLock mounting system – on and off without tools, or swap out with Memphis Fats/Slim
windshields, Sportshields or Gauntlet Fairing by purchasing a plate-only mount kit
DESCRIPTION
For 96-10 XL 883C/1200C
PART #
GAUNTLET FAIRING
GAUNTLET FAIRING
TRIGGER-LOCK MOUNT KITS
POLISHED
BLACK
PLATE-ONLY KITS
POLISHED
BLACK
2330-0094
2320-0103
2320-0104
SUG. RETAIL
2330-0094
$149.95
PART #
TRIGGER-LOCK MOUNT KITS
2320-0103
2320-0105
2320-0105
SUG. RETAIL
$142.95
142.95
PART #
PLATE-ONLY MOUNT KITS
2320-0104
2320-0106
2320-0106
SUG. RETAIL
$62.95
62.95
3508-0020
3508-0020
BIG ZIPPER POUCH
•Tri-pouch for storage
•Made in the U.S.A.
PART #
DESCRIPTION
3508-0020
3508-0021
For all Memphis Shades Batwing fairings and Fats windshields
For 96-12 FLHT/FLHX/FLHTK/FLHTC/FLHTCU and H-D FL Trikes
SUG. RETAIL
$89.95
89.95
2040-1058
TruFLEX®
WINDSHIELD
TRIM LED TURN
SIGNALS
THE SCOOWL™
FAIRING
EXTENSION
•Transforms the look of your Road Glide
•Extends the forward look of the fairing and
gives it an “angry stare” profile from the front and side views
•Can be installed as is, or painted to match your bike
NOTE: T
o gain the full effect of the fairing extensions, 2009 and earlier
models may want to use a 2010 or later H-D OEM headlight assembly
(sold separately).
PART #
DESCRIPTION
SUG. RETAIL
2350-0164
For 98-12 FLTR
$159.95
•Features 90 LEDs per side for superior performance
•Use as turn signal or add Custom Dynamics Eclipze2® to use a running light/
turn signal combination
•Follows contour of windshield easily with no warming or heat gun needed
•Mounts with included 3M double-sided tape
PART #
DESCRIPTION
SUG. RETAIL
FOR 96-12 FLHT, FLHX H-D FL TRIKE AND MOST OTHER BATWING-STYLE FAIRINGS
2040-1058
2040-1059
Amber w/ smoke tubing
White w/ smoke tubing
$149.95
149.95
9
MOTOR TRIKE INC.
Our new friends at family-owned and operated Motor
Trike represent the cutting edge in trike manufacture and
customization. Their headquarters in Troup, Texas features
true manufacturing facilities of the highest level. So from
lighting and wiring to their very innovative mechanical
reverse for just about any late-model H-D transmission,
Motor Trike offers parts and accessories that are stylish,
functional and in-demand by riders everywhere.
1103-0023
MECHANICAL REVERSE WITH ELECTRONIC
CUT-OFF SWITCH
•Makes parking anywhere possible
•Constructed from lightweight aluminum, chromed and zinc-plated
•Equipped with an electronic cut-off switch to protect transmission from
operator error
•No exhaust modification needed when used with OEM exhaust
•Does not affect forward gear operations
•Clutch-operated, eliminating any strain on the electrical system
•Plug-and-play harness, all installation tools and instructions included
•Made in the U.S.A.
PART #
DESCRIPTION
1103-0023
For 09-12 (all) FLHT and Screamin’ Eagle
6-speed OEM transmission (hydraulic clutch)
For 07-08 (all) FLHT and Screamin’ Eagle
6-speed OEM transmission (hydraulic clutch)
For 09-12 (all) FLHT and Screamin’ Eagle
6-speed OEM transmission (standard clutch)
For 85-99 (all) EVO/FLT/FLHT, 99-06 (all) Twin Cam/
5-speed/FLH/FXST/FLST (standard clutch)
For 85-99 (all) EVO/FLT/FLHT, 99-06 (all) Twin Cam/
5-speed (hydraulic clutch)
For 07-08 (all) FLHT and Screamin’ Eagle 6-speed OEM
transmission, 07-12 FXST/FLST (standard clutch)
1103-0024
1103-0025
1103-00261
1103-0027
1103-00281
SUG. RETAIL
$1,495.95
1,495.95
1,395.95
1,395.95
1,495.95
1,395.95
1Softtail
models may require steel-braided oil lines to route around
reverse component.
TRAX RUNNING BOARD KIT
•Patented step-and-walk-on design allows easy mounting and
dismounting of trike
•Adds a custom look and style to Tri Glide™ trike
•Offers the rider protection from the elements and road debris
•Constructed from fiberglass with a gel-coat finish to allow
for custom paint application
•One-piece running board design offers cleaner paint and
installation processes
•All mounting hardware and instructions included; sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
0521-0982
For all 09-12 FLHTCUTG
SUG. RETAIL
$925.95
CHROME LIGHT BARS
•Combines added safety and major styling
•Diamond-shaped incandescent red running lights for a unique look
•Completely bolt-on – no drilling on body
•Plug-and-play wiring – no splicing
•Gasket edge trimming to protect the interface between bar and body
•All mounting hardware and instructions included
•Made in the U.S.A.
10
PART #
DESCRIPTION
2040-1066
2040-1067
For 11-12 FLHTCUTG
For 09-10 FLHTCUTG
SUG. RETAIL
$695.95
695.95
2040-1068
PETERSON CHROME LIGHT BARS
•Combine added safety and major styling
•Rectangle-shaped, single-function red LED lights for a unique look
•Plug-and-play wiring – no splicing
•Chrome with gasket edge trimming to protect the interface between bar
and body
•All mounting hardware and instructions included
•Made in the U.S.A.
TRAILER HITCH WIRE HARNESS
•Essential for connecting wiring to a trailer of any kind
•Wiring is plug-and-play – no splicing
•Maintains the integrity of original bike/trike harness
•Six-pin connector allows for auxiliary power to be run to trailer
•Made in the U.S.A.
PART #
DESCRIPTION
3902-0129
For all 09-12 FLHTCUTG
SUG. RETAIL
$233.95
PART #
DESCRIPTION
2040-1068
2040-1069
For 11-12 FLHTCUTG
For 09-10 FLHTCUTG
SUG. RETAIL
$595.95
595.95
3902-0127
TRAILER HITCH
•Essential addition for towing of any kind
•Features 17/8” chromed ball and receiver; black-painted hitch and mounting
•Completely bolt-on – no welding or drilling required
•Made in the U.S.A.
PART #
DESCRIPTION
3902-0127
For 11-12 FLHTCUTG
SUG. RETAIL
$189.95
AUXILIARY FOG LIGHTS FOR
TRAX RUNNING BOARDS
DESCRIPTION
2001-0652
Fog lights for Trax running boards
DESCRIPTION
3902-0128
For 09-10 FLHTCUTG
SUG. RETAIL
$189.95
CHROME ACCENT RINGS FOR
TRAX FOG LIGHTS
•Add custom style and look
•21/2” diameter
•Enhances rider visibility and safety
•55 watt Halogen bulbs
•Plug-and-play wiring – no splicing
•Sold in pairs
•Made in the U.S.A.
PART #
PART #
•Increase the style and class of the trike
•Enhance fog light features of the Tri Glide™ trax
•All necessary mounting hardware and
instructions included
•Sold in pairs
•Made in the U.S.A.
SUG. RETAIL
$149.95
PART #
DESCRIPTION
2001-0653
Chrome accent rings for Trax auxiliary lights
SUG. RETAIL
$29.95
UNDER
COVER
LOCK-UP
CLUTCH
•Designed to fit under the OEM primary cover
•Fully adjustable billet lock-up pressure plate
•Multiple coil spring sets provide a variety or pressure options
•Extra capacity that will handle the horsepower/torque of today’s big-inch motors
•Reduced lever effort
•No modifications or special tools required to install
•Includes billet pressure plate, steel inner hub, carbon friction plates, tempered steel
plates and chrome silicon, heat-treated springs
•Made in the U.S.A.
PART #
DESCRIPTION
1130-0196
For 98-06 Big Twin (except 06 Dyna)
SUG. RETAIL
$699.95
11
HARDBAGGER
We are always happy to welcome new friends to the
Drag Specialties family, especially when they bring with them innovative new products that
riders are sure to ask for by name. Take, for example, Hardbagger’s Top Shelf Saddlebag
Organizers™ seen below. “Stop Digging in your Hard Bags!” is how these folks state their
case – and we think they are right. Simplicity and function combine to put almost anything
you want right within reach. Read on below to learn more.
TOP SHELF TRAY FOR OEM STANDARD TOUR-PAK®
•Lift-out custom molded plastic organizer tray
•Fits OEM Tour Paks
•Easy assembly – no tools required
•Fits with or without factory fabric liner
•Includes grip rubber floor mat and hook-and-loop closure set; black
•Made in the U.S.A.
NOTE: Does not fit FLHX CVO, FLHTCS, FLHTCUSE or FLTRSEI models.
NOTE: T
rays will work with nylon lid organizers
but not with nylon sidewall pouches.
PART #
DESCRIPTION
3501-0767
For 93-12 FLHT/FLTR/FLHX
SUG. RETAIL
$49.95
TOP SHELF 3501-0762
SADDLEBAG
ORGANIZERS™
3501-0764
•This custom-molded plastic
tray stores valuables in the
top rear section of saddlebags
for quick and easy access
•Storage for cell phones, iPods®, sunglasses, keys and more
•Removes or installs quickly using the factory ball
head stud lock pin
•High-impact custom molded for both right and left side compatibility
•Kits include tray, grip rubber floor mat, mounting spacers and tether screws
•Tray dimensions: 31/2” H x 3” D x 71/2” W x 11” L
•Made in the U.S.A.
3501-0763
3501-0765
NOTE: Trays will work with nylon lid organizers but not with optional fabric H-D® liners or nylon sidewall pouches.
PART #
DESCRIPTION
SUG. RETAIL
FOR 04-12 FLHT/FLHR/FLHX/FLTR MODELS W/ OEM STYLE HARD BAGS
PART #
DESCRIPTION
SUG. RETAIL
FOR 93-03 FLT/FLHT/FLHR/FLHX/FLTR MODELS W/ OEM STYLE HARD BAGS (CONT)
FOR 93-03 FLT/FLHT/FLHR/FLHX/FLTR MODELS W/ OEM STYLE HARD BAGS
FOR 97-08 FLHRC/FLHRS MODELS W/ OEM SYLE SOFT BAGS
3501-0762
Universal (left or right side)
3501-0763
Right side
$39.95
44.95
•High-density foam kit for universal
saddlebag tray
•Pre-perforated every 1/2” to custom
fit cell phones, goggles, glasses and
other accessories
•Sold each
•Made in the U.S.A.
DESCRIPTION
3501-0768
For universal tray kit PART #3501-0762 only
SUG. RETAIL
$15.95
•1/8” replacement rubber grip floor mat
•Made in the U.S.A.
DESCRIPTION
3501-0770
For universal tray kit PART #3501-0762 only
SUG. RETAIL
$9.95
ROTO 360° UNIVERSAL LED LIGHT
•Light rotates 360° and tilts 45°
•LED lights last 100,000 hours; magnetic base and hookand-loop closure pad included for mounting
•Water and shock resistant; batteries included
•Available in black
PART #
DESCRIPTION
2040-1087
Roto 360° universal LED light
12
$44.95
3501-0765
Left side
44.95
•Die-cut perforated foam designed to fit at least
nine different configurations of Glock® (G17, G19,
G21, G22, G25, G31, G32, G37, G38) and 9mm, 10mm,
.40, .45, .380 and .357 clips
•Secure and lock your pistol and clip
•Fits universal/saddlebag tray only
•Pluck foam section accordingly for your model Glock handgun
•May fit other brands of pistols with minor foam trim modifications
•Includes foam conceal cover; sold each
•Made in the U.S.A.
NOTE: This product may not be legal for sale or use in all states. Please
check applicable laws.
REPLACEMENT RUBBER
GRIP MAT
PART #
Left side
GLOCK® MULTI-FIT FOAM
INSERT KIT
PICK-N-PLUCK FOAM
INSERT KIT
PART #
3501-0764
SUG. RETAIL
$10.95
JUNE 2012
PART #
DESCRIPTION
3501-0769
For universal tray kit PART #3501-0762 only
SUG. RETAIL
$24.95
12V OUTLET CHARGER
WITH HARNESS
•12V accessory outlet for powersports
with fused harness assembly
•Perfect for your motorcycle on the go
•Uses include: cell phones, GPS, heated
clothing, MP3/iPod® or any 12V device
including battery chargers or jumper connection
•Works in conjunction with
PART #
DESCRIPTION
Hardbagger Top Shelf
2130-0106 12V outlet charger
saddlebag trays
w/ harness
•Made in the U.S.A.
| 9901-1235
SUG. RETAIL
$43.95