PDF - Sierra Automated Systems

M I N I
C O N S O L E
Rubi-T Mini Console Control Surfaces are ideal for voice tracking rooms,
news booths, edit suites, announce booths, effects sub-mixing, and
more. They are also perfect for providing the local control needed by
hosts, producers and directors without taking up their whole work area.
Using modules just 6” high and 1.6” wide, it packs much of the power
of the Rubicon and RubiconSL consoles. Since there is no motherboard
or required modules, you can equip Rubi-T with as many or as few
modules as you require for your specific application. Rubi-T’s input
module features a full-length P&G fader, channel ON/OFF buttons, and
four programmable buttons used as source select, bus assignment, cue
or IFB buttons. Additional modules provide monitor and headphone
source select and level control, intercom/talkback, delay control, remote
trigger control, clock/timer, metering, headphone amps and a USB
audio interface.
Rubi-T can function as
an independent console
control surface all on its
own, connected to a 32KD
or RIOLink. Or it can be an
“extension” of a Rubicon or
Rubicon-SL control surface,
providing more input modules
that put their sources on the
same program buses as the
main console.
With a wide variety of module
choices and mounting options,
Rubi-T will add a new level of
power, flexibility and style to your studios. Start building yours today!
1.818.840.6749 voice
1.818.840.6751 fax
2821 Burton Avenue
Burbank California
91504-3224 USA
www.sasaudio.com
Datasheet Revision 1.1
11/10/2011
C O N T R O L
S U R F A C E
Rubi-T Modules
TP-L4
Rubi-T Input/Fader Module
TP-R, TP-R6
Monitor Speaker or Headphone Controller
TP-1, TP-1L, TP-4, TP-8, TP-8A
Programmable Button Modules
TP-CT
Clock/Timer
TP-MTR
Stereo VU Meter
TP-HPV, TP-HP
Headphone Amplifiers
TP-USB
USB Audio interface
TP-BP
Blank Panel
Tabletop Enclosures
Table-top turret cabinets are available in widths of
3, 6, 9, 12,15 or 20 modules wide. The cabinets
are aluminum with a bead blasted finish to match
the Rubicon family of products.
Flush Mount Enclosures
Flush mount enclosures are available in widths of
1, 2, 3, 6, 9, 12 and 15 modules wide. These
have a low profile design requiring a cutout in your
studio furniture.
Mounting Rails
Turret mounting rails are available for use in custom
furniture designs.
Sierra
Automated
Systems
TP-L4
Input/Fader Module
TP-1, TP-4, TP-8
User Button Modules
TP-HPV, TP-HP
Headphone Amplifier Modules
• Full Length 100mm P&G
Fader
• TP-1 is often used as a
delay dump or GPI trigger.
• High gain amp drives all
models of headphones.
• Channel On/Off buttons
• TP-4 is typically used for
complete delay control or
GPI trigger groups.
• Features 1/4” & 1/8” jacks.
• Four programmable
buttons for Source
Assignment, Bus
Assignment, Cue or IFB
• TP-8 usually serves as an
intercom/talkback panel
or extended GPI functions.
• RJ-45 connections allow
for easy daisy chaining of
multiple amps.
• Available with or without
volume control.
TP-MTR
VU Meter
TP-CT
Clock/Timer Module
TP-8A, TP-8AICM
User Button Module w/dial-up
• High resolution, 3 color,
24 segment LED display
• Clock driven directly by
station’s SMPTE or ESE
master clock.
• Functions as a source select
for headphones, monitors or
fader modules
• Timer can operate standalone or linked to follow
a console timer.
• Use as an intercom control
panel.
• Accurate VU ballistics
• Stereo or dual mono
operation
• Occupies 3 module slots.
• Steer bus outputs from the
Rubi-T to any 32KD or
RIOLink destination.
TP-USB
USB to Audio Interface
TP-R6, TP-R
Headphone/Monitor Control
TP-BP
Blank Module
• Plug and Play interface
for laptops and PCs.
• Rotary encoder controls
levels for monitors speakers
or headphone amps.
• Use as a spacer to create
more user friendly layouts
• Bi-directional, stereo
audio in both analog
and AES formats.
• RJ-45 audio connections
make an easy inferface
to the SAS RIOLink.
• Six programmable source
select buttons allow instant
monitoring changes.
• Parallel operation of several
panels is supported.
Rubi-T Mounting Options
Rubi-T Wiring
• High quality, precision
machined, bead blasted
aluminum enclosures are
available in low profile
flush mount or table top
designs.
• Modules are furnished with
RJ-45 connectors that provide
easy connections for audio/
data plus power.
• A Rack mount enclosure
(not pictured) is also
available that will hold
10 turret modules in a
4RU panel.
• Cut-to-length mounting rails
are available for use in custom
furniture designs.
• Most modules daisy chain
making installation a breeze.
• SAS 89D-2132 and 89D-8x4
wiring blocks clean up your
punch block area and speed
installation providing RJ-45
links right to the Rubi-T.
• The SAS RM21-45 panel
provides the same connectivity
only on a rack mount panel.
• Simple cat-5 cables connect
your Rubi-T back to the 32KD,
RIOLink or one of the special
SAS installation blocks or
interface panels.
• All modules require
12VDC power.
• Fill in unused slots in turret
enclosures
• Mount custom buttons,
connectors or controls.