VEROTEC
Electronics Packaging
19” Rack Cases
19” Rack Cases
Applications
19” rack cases are designed to offer a simple solution to many 19” mounting
applications. The design allows numerous combinations to be assembled
according to the application and hence offers total flexibility for the design
engineer, using common piece parts. It also allows the case to be presented in
a number of attractive finishes for individual product tailoring of 19” mounting
applications.
8 19” Rack Cases
Features





Conforms to IEC 297-1, DIN 41494
Simple design for total access
Three depth variations
Six height variations
Numerous configurations for total flexibility
Standard heights are 1U, 2U and 3U. Heights of 4U, 5U and 6U are subject
to MOQ
19” RACK CASES
Contents of kit
Item/Description
Material/Finish
Top and base
0.9mm steel, Painted RAL 7035 Grey
Front panels
3mm anodized aluminium (clear) or 2mm steel
painted black
Rear panels
0.9mm steel, Painted RAL 7035 Grey
Handles
ABS RAL 7035 or black and clear/black anodised
aluminium extrusion.
Front
Side
Configuration & Ordering
Please see the following page for
full configuration details of options
and order code table.
0.9
Plan view
Handles
Height
A
B
of unit
1U
44,45
34,00
2U
88,9
78,0
3U
133,35
122,0
*Assuming 3mm F/panel thickness
Dept
of unit
250
350
450
C*
D
F
252,0
352,0
452,0
245,8
345,8
445,8
292,0
392,0
492,0
GENERAL ASSEMBLY
The top
Front panels
Tel: +44 (0)2380-246900
sales@verotec.co.uk
The base
8.02
2
Rear panels
19” Rack Cases
HOW TO CONFIGURE THE RACK CASE
Since it is generally accepted that the case will consist of a top, base, front and
rear, the following example illustrates how to select the configuration which best
suits you.
THE TOP
This is available in 3 depths of 250mm, 350mm and 450mm in a ventilated
and unventilated version and is simply attached to the case by means of two
fasteners at the front.
The top
Handles
The base
Front panels
HANDLES
8 19” Rack Cases
These are available in 1U, 2U and 3U versions and can be either black or grey.
They attach to the case using 4 fixing screws through the front panel fixing
centres.
THE BASE
This is available in 3 depths of 250mm, 350mm and 450mm and three
heights of 1U, 2U and 3U. It is also available in ventilated and unventilated
versions.
FRONT PANELS
These are available in clear anodised aluminium or black painted and
are attached to the base by means of 4 screw fixings. There are 3 height
variations of 1U, 2U and 3U and all will accept front panel handles.
Delivery: Please note that all units will be supplied assembled.
REAR PANELS
These are available in RAL 7035 painted steel and are attached to the base
by 4 screw fixings. There are 3 height variations of 1U, 2U and 3U and all are
removable.
Ordering information
Top covers
250mm
350mm
450mm
Ventilated
503-232963
503-232965
503-232967
Unventilated
503-232964
503-232966
503-232968
Base 1U
250mm
350mm
450mm
Ventilated
503-232945
503-232951
503-232957
Unventilated
503-232946
503-232952
503-232958
Base 2U
250mm
350mm
450mm
Ventilated
503-232947
503-232953
503-232959
Unventilated
503-232948
503-232954
503-232960
Base 3U
250mm
350mm
450mm
Ventilated
503-232949
503-232955
503-232961
Unventilated
503-232950
503-232956
503-232962
Rear panels
Configurated part numbers:
So that specific permutations can be provided, it is now possible to configure
exact requirements using the chart below. Each digit of the order code
represents an available option for example, part number 519-110113 represents
a 1U rack case, 250mm deep with a plain top cover and base, clear anodised
front panel and grey handles. Configured units will be supplied assembled.
RACK CASE CODE GENERATOR
519 - 1 1
Height
Front panels
1U
2U
3U
Black painted
503-232970
503-232973
503-232976
Clear anodise
503-232971
503-232974
503-232977
Rear panels
1U
2U
3U
RAL 7035 painted steel
Handles
503-232984
503-232985
503-232986
1U
2U
3U
Black
503-232978
503-232980
503-232982
Grey
503-232979
503-232981
503-232983
Note: Care should be taken with 1U and 2U 450mm deep versions not to excessively
weight load the unit without the use of additional chassis supports.
Depth
1U
2U
250mm
Nominal
3U
1U
2U
350mm
Nominal
3U
1U
2U
3U
450mm
Nominal
X
X
X
X
3rd
Digit
Top & Base Covers
4th
Digit
Rear Panel &
Handles
6th
Digit
0
Vented top & base
0
1
Unvented top &
base
1
No handles or
rear panel
0
2
Vented top /
unvented base
2
R/panel & grey
handle
1
Unvented top /
vented base
3
R/panel & black
handle
2
Vented base only
4
5
Grey handles only
No rear panel
3
Black handlers
only
No rear panel
4
R/panel only
No Handles
5
3
4
5
Unvented base only
6
7
8
Front Panel
5th
Digit
No front panel
0
Clear anodised front
panel
1
Black painted front
panel
2
8.03
19” Rack Cases
4U, 5U and 6U Rack cases
In addition to the standard 1U, 2U and 3U versions, we also offer 4U, 5U and
6U rack cases, suiting applications where more space is required. The basic
construction is very similar to the standard cases, the only difference being the
front panel is secured to the base with four screws either side as opposed to two.
4U, 5U and 6U rack cases can be supplied either assembled or in kit form
8 19” Rack Cases
Ordering Information
There is a minimum order quantity of ten pieces for these products with
ordercodes being assigned on a per order / enquiry basis. For a quotation
or technical details, please contact our sales office with your configuration
requirements from the table below:
Description
Options
Height
4U / 5U / 6U
Depth
250mm / 350mm / 450mm
19” RACK CASES
Front Panel Finish
Silver Anodise / Black Paint
Rear Panel
Fitted / Not Fitted
Handles
Grey / Black, Fitted / Not Fitted
Supply
Assembled / Kit Form
Rack case Accessories
Chassis Supports
These steel chassis supports can be varied along the depth of the rack and
provide an ideal method of mounting heavy rack cases. They position the rack
cases accurately in line with Unit heights and align the front panel mounting
holes with the rack fixings. Chassis supports are sold in pairs and have a load
rating of 50KG.
Note: These chassis supports are designed primarily for IMRAK and VERAK cabinets.
Please check drawing below for compatibility with other 19” cabinets
Contents of kit
Description
Chassis Support
Qty
Material
finishes
2
1.5 mm steel
Light grey RAL 7035
fixing
Load rating and safety specification
50 kg
Ordering Information
Length (min cabinet depth)
Order code
470 mm (600 mm)
960-4001285
670 mm (800 mm)
960-4001704
CHASSIS SUPPORTS
8.04
4
19” Rack Cases
EMC Rack case
The EMC Rack case is designed for applications that demand a high level of EMC
screening and cosmetic appeal without compromising on strength and usability.
The EMC Rack case is constructed with light-weight, extruded aluminium front,
rear and side panels with interlocking aluminium top and bottom covers. This
“sealed” design provides excellent EMC performance whilst making it easy to
gain access to the electronics within.
Features:
Conforms to IEC 297-1, DIN 41494
Lightweight yet robust construction
Good Aesthetic Design
High EMC Performance
Easy Access
Customizing Options
Three Hieght Options
Two Depth Options
Supplied Assembled
EMC RACK CASES
Light-weight, extruded
front, rear and side
panels mean a strong
construction and
excellent EMC shielding
is achieved
Applications:
n
n
n
n
n
8 19” Rack Cases
n
n
n
n
n
n
n
n
n
Broadcast
Audio
Datacoms
Networking
Instrumentation
Material and Finish
Description
Material / finish
Front / Rear Panel
3mm Aluminium (Extruded), Anodized
Top / Bottom covers
1mm Aluminium
Sides
Extruded Aluminium, plastic trims
Removable plastic side
trims are available in
different colours to
enhance cosmetics
and match customer’s
colour schemes
Ordering Information
Description
Ordercode
1U 250mm EMC Rack case
503-4000963
1U 350mm EMC Rack case
503-4000964
2U 250mm EMC Rack case
503-4001700
2U 350mm EMC Rack case
503-4001701
3U 250mm EMC Rack case
503-4001702
3U 350mm EMC Rack case
503-4001703
Fast and simple removal
of top cover means easy
assembly and quick
access for servicing /
maintenance.
Front and rear
panels can be easily
removed with four
screws allowing easy
modification. Customer
specific machining,
silk screening, painting
etc. can be provided by
Verotec – please ask for
details
The Netherlands: +31 (0)23 - 531 91 84
infonl@m-h.biz
Belgium: +32 (0)3 - 660 13 20
infobe@m-h.biz
Germany: +49 (0)6192 - 97 91 85
infode@m-h.biz
www.m-hgroup.com
www.quintis.com
8.05