Datasheet: PoS, Single Mode OC-3c/12c ASE Model

| DATA SHEETS |
Unpublished
Datasheet: PoS, Single Mode OC-3c/12c ASE Model 807-420 SKU 02209 Part
Number 3609367
Key Features:
Supports TruView™ and Visual Performance Manager™
Supports IP Transport and OmniPoint software
Supports PoS link layer data on SONET and SDH lines
Supports both OC-3c (STM-1) and OC-12c (STM-4) speeds
Supports PPP, Frame Relay, HDLC, and MLPPP encapsulations
Capable of Inline placement with MSP certified fail to wire
Last mile keep alive upon CPE Router failure provides 100% availability and
fault isolation
Configurable to support IPV4 or IPV6 management and monitoring
Inband and LAN management capable
Pro-active real time SNMP events with event forwarding
Continuous 1 second monitoring with burst analysis
Layer1 through 7 auto-detection and analysis
Server and application response time baselines and alarms
2000 Concurrent VoIP calls with MoS scores
4096 site to site SLA metrics per CoS
Rogue application discovery
On demand remote packet capture when required
The TruView and Visual Performance Manager Packet over Sonet OC-3c/12c single inline ASE (available on VPM 6.1 or later) enhances the analysis functionality of
optical networks. The Analysis Service Element (ASE) provides OC-3c and OC-12c support for future upgrades of detailed network traffic analysis and management,
while maintaining full wire speed pass-through of all traffic. It supports IP convergence of bandwidth, applications, burst, and VOIP data traffic.
PoS, Optical SFP, Single Inline OC-3c/12c ASE front view
PoS, Optical SFP, Single Inline OC-3c/12c ASE rear view
The PoS OC-3c/12c ASE is deployed on the WAN side of the customer edge router for true access line monitoring. The high speed ASE is designed to display traffic to or
from the WAN, allowing for segmentation troubleshooting between the network and the applications at the data center, while identifying local loop errors or service
provider long haul issues.
1 of 4
Notes:
Customers Responsibilities:
Space & Power for ASEs and Customer Server
Ethernet connection between ASE & Customer Router
Customer Server installation & Maintenance
Optional Software packages available
Supports STM-1 and STM-4
Has dual power supply for redundancy
Separate Ethernet mgmt port
4,096 site to site IP Circuits for SLAs
6,000 Concurrent Real Time calls
1,200,000 Daily calls
2 of 4
PoS, Single Mode OC-3c/12c ASE Model 807-420 SKU 02209 Part Number 3609367
Description
PoS, Optical SFP, Single Inline OC-3c/12c ASE
General
Dimensions
1 EIA nit 1.75" (4.44 cm) high x 19" (48.26 cm) wide x 43.0 x 434.0 x 627.1 (mm) (w/o ear, w/o bezel) 1.69 x 17.09 x 24.69 (in) rackmountable chassis
Weight
Chassis: 26lbs (11.75 kg) Shipping box: 52lbs (23.58 kg)
Max Data Rate
OC-3c (155.52 Mbps) and OC-12c (622.08 Mbps)
Timing Mode
Derived externally from the network.
Environment
Operating Tempature
0° to +40°C (+32° to +104°F)
Storage Tempature
-20° to -55°C (-4° to +131°F)
Power Requirements
Input
220 watts, 100 – 240V,
50-60 Hz
Input Current Rating
5 amps
Redundant Power Supplies
Yes
Network Interface
Line Rate
OC-3c (155.52 Mbps) and
OC-12c (622.08 Mbps)
Line Mode
SONET or SDH
Payload Scrambler
Uses the X∧43+1 algorithm
Connectors
SFP
Wavelength
1310 nm
Tx Average Output Power
-11 dBm
Rx Sensitivity
-28 dBm
Serial Port Interface
Baud Rate
0° to +40°C (+32° to +104°F)
Parity
-20° to -55°C (-4° to +131°F)
Stop Bit
1 stop bit
Electrical Format
EIA RS-232, DTE
Connector
9-pin D, male per EIA-574
Ethernet 100/1000 Base-T Interface
Bit Rate
100/1000 Mbps
Connector
8-pin modular jack: RJ-45
Compliance
Compliant with Bellcore GR-253, ITE G.957 standards.
Complies with Telcordia GR-253-CORE jitter tolerance, jitter transfer and intrinsic jitter.
3 of 4
What are ASEs?
ASEs (Analysis Service Elements) are data collection and network performance monitoring hardware devices placed on a wide area network (WAN) or Local Area
Network (LAN) as part of the TruView and Visual Performance Manager systems. ASEs offer in-depth, real-time, and historical visibility into the performance of an
applications infrastructure. Data gathered by ASEs is stored in the VPM server and displayed and analyzed from the Web portal interface.
As a service level management tool, ASEs indicate when services are being met, provide warnings when services start to degrade, and send alerts when services are not
met.
What is TruView and Visual Performance Manager?
TruView and Visual Performance Manager are flexible solutions that can scale to help the largest enterprises, carriers and managed service providers decrease the cost
of performance management, increase revenue, and optimize utilization of existing assets. This is accomplished by enabling IT organizations to become a source of
competitive advantage, not a cost center, by providing actionable visibility into a centralized integration point for managing applications, VoIP network and server
performance across a complete network.
Hardware Support
Enhanced ASE hardware warranty service programs are available to help you maximize your investment in TruView and Visual Performance Manager. For more detailed
warranty information, visit enterprise.netscout.com.
Software Maintenanced
Each hardware ASE is managed remotely by the TruView or Visual Performance Manager. Maintenance is dependent on the software module purchased. For more
detailed maintenance information, visit Inside Sales at the number below.
Professional Services
Professional services are available for installing, maintaining and customizing your solution your ASE hardware and TruView and Visual Performance Manager solution.
Replacing the hardware on site with or without a technician is offered worldwide. For more detailed professional services information, visit
enterprise.netscout.com/professionalservices.
Ordering information
For more details, please visit www.netscout.com.
With INLINE capabilities
© 2017 NETSCOUT. Rev: 01/24/2017 1:12 pm (Literature Id: 3889559)
4 of 4