APPLICATION 12 pair 24AWG analog audio multi

TECHNICAL DATASHEET
Analog multicore 12-pair 24AWG FRNC
code
Version
Date
page
1513ENH
3
2012-01-18
1/2
APPLICATION
12 pair 24AWG analog audio multi-core cable.
CONSTRUCTION
1. Conductor
2. Insulation single wires
3. AlPet foil
4. Drainwire
5. Jacket single element
6. Filler
7. Shielding foil
8. Drainwire
9. Jacket
1.
2.
3.
4.
5.
6.
7.
8.
9.
Conductor
Material
Dimension
Insulation single wires
Material
Diameter over insulation
Colour of insulation
Shielding foil:
Material
Coverage
Drainwire:
Material
Dimensions
Position
Jacket single element
Material (bonded to shielding foil)
Nominal diameter
Filler
Foil Shield
Material
Coverage
Drainwire
Material
Dimensions
Jacket
Material
Colour
Diameter
Nominal wall-thickness
Tinned copper
7 x 0.2mm (AWG 24)
Polyethylene
1.02 ± 0.05 mm
Red and Black
Aluminum-polyester
100 %
Tinned copper
7x0.2 mm (AWG24)
Under shielding foil
FRNC (colour: Grey )
Elements are numbered 1 -12 for identification.
2.86 mm
Aluminium polyester
100 %
Tinned copper
7 x 0.4 mm (7xAWG26)
FRNC
Grey
14.0 ± 0.5 mm
1.0 mm
ã Belden Wire & Cable B.V.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
TECHNICAL DATASHEET
Analog multicore 12-pair 24AWG FRNC
code
Version
Date
page
1513ENH
3
2012-01-18
2/2
REQUIREMENTS AND TEST METHODS
Electrical:
Nominal capacitance conductor to conductor @ 1 kHz
Nominal capacitance conductor to shield @ 1 kHz
Maximum conductor DC resistance @ 20°C
Nominal inductance
Nominal shield DC resistance single element @ 20°C
Mechanical and physical:
Temperature rating
Resistance to flame propagation:
FRNC material
Tensile strength:
Elongation at break:
Corrosivity
Maximum pulling tension
Minimum bending radius without load
Minimum bending during install with load
92 pF/m
180 pF/m
88.5 Ohm/km
0.75 µH/m
52 Ohm/km
-30 to +70 ˚C
To meet IEC 332-1
≥ 9.0 N/mm2
≥ 125 %
To meet European Standard HD602
980 N
10 x cable diameter
15 x cable diameter
Belden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January
2003); this is valid for all material produced after the RoHS compliant date for this product.
ã Belden Wire & Cable B.V.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner