General Specifications - Yokogawa Electric Corporation

<<Contents>> <<Index>>
General
Specifications
Model AIP830
Operation Keyboard for Singleloop Operation
GS 33K50C32-50E
GENERAL
This document describes the hardware specifications of AIP830 Operation Keyboard for Single-loop Operation for
Desktop Type HIS.
It contains an independent USB speaker (a sound function) other than buzzing alarms (buzzer sounds).
An AIP830 keyboard can be used per one Desktop Type HIS.
HARDWARE SPECIFICATIONS
For installation specifications and environmental conditions, which are common to the systems, refer to “System
Overview” (GS 33K01A10-50E, GS 33K01A20-50E).
•Type: Flat keyboard (Sound Function: USB Speaker)
•PC Interface:
Interface Connector: USB A type x 2 (*1)
Conformable USB standard
Operation Keyboard Function :
USB 2.0 (Full-speed, Bus-powered)
Sound Function :
USB 1.1 (Full-speed, Bus-powered)
•Input Voltage: 5 V±5 % (Supplied from USB Port of PC)
•Maximum Consumption Current: 1 A
•Weight: 2.0kg (Without VESA Bracket), 2.5 kg (With VESA Braceket) (*2)
•Chassis Color: Black (Equivalent to Munsell No. N1.5)
•AIP830 belongs to IEC 61010-1 installation category Class I
(A device not directly connected with the main power supply).
•Operating Environment
Ambient temperature:
5 to 40 °C (for normal operaiton)
-20 to 60 °C (in storage and transportation)
Ambient humidity:
20 to 80 %RH (Non-condensing)
*1:
*2:
Both connectors must always be connected directly to a PC.
AIP830 with VESA Bracket must be mounted where it holds at least 10 kg of weight.
REGULATORY COMPLIANCE
For the detailed information of the following standards, refer to “System Overview” (GS 33K01A10-50E,GS 33K01A20
-50E).
Safety Standards
[CSA] (*1)
[CE Marking] (*2)
[EAC Marking] (*6)
EMC Conformity Standards
[CE Marking] (*2) (*5)
[RCM] (*3)
[KC Marking] (*4)
[EAC Marking] (*6)
*1: *2: *3: *4: *5: *6: AIP830 complies to CSA only when CSA mark is indicated on the PC which connects with AIP830.
AIP830 complies to CE Marking only when CE mark is indicated on the PC which connects with AIP830.
AIP830 complies to RCM only when RCM mark is indicated on the PC which connects with AIP830.
AIP830 complies to KC Marking only when KC mark is indicated on the PC which connects with AIP830.
EN 61000-3-2 and EN 61000-3-3 in CE Marking are out of scope for AIP830.
AIP830 complies to EAC Marking only when EAC mark is indicated on the PC which connects with AIP830.
Yokogawa Electric Corporation
2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan
Tel.: 81-422-52-5634 Fax.: 81-422-52-9802
GS 33K50C32-50E
©Copyright Dec. 2012 (YK)
3rd Edition Sep. 1, 2014 (YK)
2
<<Contents>> <<Index>>
LAYOUT
The Operation Keyboard is composed of both alphanumeric keys and special operation keys.
It also has special window call keys grouped by function and 64 user-definable funciton keys which are used for
process control and plant monitoring.
Mode selection switch (*1)
Control keys
Plastic cover
Operation confirmation keys (*2)
POWER Lamp
Function keys
(64 keys)
Plastic cover
Built-in speaker
(Electronic buzzer)
Cursor move keys
(*4)
Display key
Buzzer reset key
Fn key
Window call keys
Data entry keys
Built-in speaker
(Sound)
*1: *2: Container window key
Ten keys
Clear screen key (*5)
Alarm acknowledgement key
Page keys (*3)
F01E.ai
With or without “Mode selection switch” is selectable by the suffix code.
Two types of operation confirmation key symbols are selectable by the suffix codes.
Type A:
Type B:
F04E.ai
*3:
*4: *5: These keys also serve as “Volume control keys” when pressed simultaneously with Fn key.
These keys also serve as “Scroll Keys” when pressed simultaneously with Fn key.
Clear screen key becomes effective when pressed simultaneously with Fn key.
(Clear screen key is enabled without pressing Fn key by changing the hardware settings.)
Figure Operation Keyboard and Names of Parts
RESTRICTIONS FOR R5.01 AND R5.02
Up to 32 function keys (No.1 to 32) are available.
Container window key is not usable.
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 33K50C32-50E June 12, 2013-00
3
<<Contents>> <<Index>>
EXTERNAL DIMENSIONS
Unit : mm
Cable Length
2300±100
7°
44
225
500
17
F02E.ai
DIMENSIONS OF VESA BRACKET ATTCHMENT
Unit : mm
100
50
225
100
75
8-M4 FOR M4 x L10 SCREW ONLY
FOR VESA MOUNT
75
159.6
138.7
58.5
250
137
500
F03E.ai
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 33K50C32-50E Dec. 20, 2012-00
4
<<Contents>> <<Index>>
MODEL AND SUFFIX CODES
Model
Suffix Codes
Option Codes
AIP830
-0
-1
0
1
1
/VESA
/EIM
/JIM
Description
Operation Keyboard for Single-loop Operation
Without Mode selection switch
With Mode selection switch
Operation confirmation key Type A
Operation confirmation key Type B
Always 1
With VESA Bracket
With English Instruction Manual
With Japanese Instruction Manual
ORDERING INFORMATION
Specify the model and suffix codes.
TRADEMARKS
•CENTUM and Vnet/IP are registered trademark of Yokogawa Electric Corporation.
•Other company and product names appearing in this document are trademarks or registered trademarks of their
respective holders.
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
Subject to change without notice.
GS 33K50C32-50E Dec. 20, 2012-00