DS-1203ZJ(-S)
Pendent Mounting Bracket Indoor
Order model:
Features:



Die casting aluminum
Universal control of angle
Monitoring scene adjustment
Dimension:
DS-1203ZJ
DS-1203ZJ-S
Parameters:
Model
Parameter
Color
Feature
Angle
Dimension
Weight
DS-1203ZJ
DS-1203ZJ-S
Pendent Mounting Bracket Indoor
Hik white
Silver
Suitable for box, bullet and zoom camera
pendent mounting
Horizontal:360°; Vertical:0~90°
70.4×84×200.5mm
220g
Notice:




Pay attention to color matching
The bracket should be installed on the flat surface of a
wall
The wall must be capable of supporting more than 3
times the total load of camera and bracket
The maximum load capacity of the mount is 2.5KG
Installation step:
①
Choose the appropriate wall to mount the bracket
② Complete the fixation of bracket and install the camera
to the universal joint and complete the wiring
③
Adjust the monitoring angle through nut and universal joint
A
B
A: Nut
B: Universal joint
Note: The actual bracket may vary from the picture above.
④ Complete the installation