Dalsa VA2X / VA3X Dual Camera Vision Appliance Brochure

IPD VA2X / VA3X
Dual Camera Vision Appliance
Overview
The VA2X and VA3X Vision Appliances provide end users and system
integrators with practical machine vision solutions for single or dual
camera applications. These low-power DIN mountable systems have
been specifically designed to minimize integration and speed
deployment by providing easily accessible control and intuitive software
setup.
Unlike their traditional smart camera counterparts, the VA2X and VA3X
incorporate the “smarts” inside the camera controller, as opposed to the
camera head. This has the dual benefit of easier integration, since it
can be positioned in a chassis alongside other automation controllers,
and smaller camera size, thus making it suitable for tight-fit
applications. In addition, the built-in dual camera capability provides a
cost-effective solution in multi-camera applications.
Interfacing the VA2X and VA3X is a snap. The units are
fully equipped with industrial grade Inputs and Outputs that
are wired using removable screw terminal connectors.
Visible LED lights are coupled to each connection that
reflects the active state of each signal. The I/O, together
with all external interfaces, is conveniently accessible on
the front of the unit facing the user.
Application setup software is preinstalled and ready to run,
thus eliminating installation and revision control problems.
The VA2X and VA3X offer two distinct software interfaces,
called iNspect and Sherlock. iNspect provides application
versatility and ease-of-use, allowing you to setup and deploy a vision
solution in a matter of minutes. For more complex tasks, Sherlock
provides even greater flexibility and control, giving you the tools and
capabilities at your fingertips to apply to almost any application.
Less integration, quick software setup, multiple cameras…..with the
VA2X or VA3X Vision Appliance, integrating machine vision just got a
whole lot easier!
P R O D U C T D ATA S H E E T
Key Features:
Compact DIN mountable system
Single or dual camera inspections
Suitable for tight-fit camera
applications
No software to install
Powerful embedded processors
ensure fast inspection times
Online or offline inspection
Quick connect/disconnect wiring
Easily integrates into factory
environments
Universal solution for end-users,
integrators and machine builders
The VA2X and VA3X are available in two versions. The VAX0 version requires an external PC/Laptop connection with
Microsoft web browser for remote setup. The VAX1 version contains additional hardware that allows users to setup and
run applications locally. The Sherlock software application is only supported on the VAX1 platforms.
FEATURES
Version
VA20
Order Code
Speed
Relative
Image
Sensor Type
# Sensors
Sensor Format
Sensor Size Min
Sensor Size Max
Memory
Communication
Display
I/O
Program
Storage
USB
Ethernet
Serial
Protocols
Visual
Local
Inputs
Outputs
Software
Application
Power
Voltage
Environment
Mechanical
Certification
Operating Temp
Storage Temp
Relative Humidity
Material
Dimensions
Weight
Standard
-03
1X
VA21
VA30
Standard
-03
Standard
-03
1X
2X
256MB
512MB
64MB Flash 128MB Flash
640x480
1024x768
2 x USB 1.1
Full
-04
VA31
Standard
-03
2X
Full
-04
512MB
4GB Flash
256MB
1GB Flash
Analog Progressive Scan
2 (simultaneous)
Area scan
640x480
640x480
1375x1135
1024x768
640x480
1600x1200
2 x USB 1.1
2 x USB 2.0
10/100/1000 Mbps
1 x RS232
Modbus, Ethernet/IP, ContolLogix, GE SNP
26 status indicators
2 x USB 2.0
1024x768 (XGA)
Opto-isolated to 5000V
Adjustable switch point: 2-10V
10 configurable (Triggers, Solution ID, General Purpose)
Opto-isolated SS relays
300mA @ 30V
8 configurable (Decision Outputs, Light Strobe, General Purpose)
iNspect
iLabel
iNspect
iLabel
iNspect
iLabel
Sherlock
iNspect
iLabel
iNspect
iLabel
24 VDC +/- 5% @ 1A
iNspect
iLabel
Sherlock
0-40 C
o
-10-85 C
5-90% (non-condensing)
o
Aluminum
9.5H x 16L x 5D cm
1.65 lbs, 0.75Kg
CE
To learn more about the VA2X & VA3X, see our website at www.goipd.com/appliances
IPD Headquarters
700 Technology Park Drive
Email: info@goipd.com
Billerica, MA 01821
Tel: +1 978.670.2002 Fax: +1 978.670.2010
PART NO.VA20-M-100-B
REVISION 04/07
Copyright © 2007 DALSA. All rights reserved.