TV with 3.5mm headphone jack. Connect Priva II to the TV using the
included 3.5mm audio cable
TV WITHOUT RCA analog out or headphone jack. Connect Priva II to the TV
with a Digital to Analog Audio Converter (please buy separately)
4
2
Priva II FAQs and Tips
DC mode
For charge free usage, you can set switch to “DC” and connect it to a DC power
source. Then the transmitter will be ON when power is on & OFF when power is off.
This could be because your headphone or receiver doesn’t support aptx Low Latency Codec.
Audio delay when paired with different headphones/receiver-
5 Micro USB charging socket
Headphones/receiver support -
3 3.5mm audio jack
USB cable
6
7
Battery
Pair and connect
Set
Press 2~4s
Pair
DC
PAIRING MODE*
Press & hold 2~4s
until LED blinks
BLUE & RED together
Set switch to “Battery”
3
Connect
4
Get headset or
speaker into
PAIRING MODE*
*PAIRING MODE: Discoverable mode for Bluetooth device, normally
the LED blinks 2 or 3 times per second or blinks 2 colors alternatively.
1
included RCA cable
5
3
OUT. Connect Priva II to the TV using the
For AVR or other audio source, you can connect Priva II using 3.5mm /
6.35mm audio cable, RCA cable or Digital to Analog Audio Converter.
USB cable
DC mode VS Battery mode
In Battery mode, Priva II will automatically turn off once disconnected for over 10 mintues,
In DC mode, Priva II will stay on standby until reconnected.
Digital Audio Converter
Option 1
*
2
*Find the correct ANALOG output: You can connect wired earphones with the RCA cable
to test whether the sound is normal.
2
6.35mm to
3.5mm Converter (included)
3.5mm
audio cable
~ 180ms
SBC codec (most standard Bluetooth audio)
~ 250ms
Dual link mode
~ 180~250ms
Option 2
4
3
Status
LED indicator
Power on
Power off
LED flashes BLUE for 1 second
Pairing mode
LED blinks BLUE and RED alternately
Connected with SBC codec
Connected with aptX codec
Connected with aptX-LL codec
LED flashes BLUE once every 5 seconds
LED flashes BLUE 2 times every 5 seconds
LED flashes BLUE 3 times every 5 seconds
Disconnected
LED flashes BLUE once every 10 seconds
LED flashes RED for 1 second
Restored factory default settings
LEDs flash BLUE and RED together (like PINK) for 2 seconds
Low battery
LED flashes RED 2 times every second
RCA cable
6
4
1 Turn both devices on 2 Wait for 5-10s 3 If it does not reconnect, press the ❹ MFB on Priva II
once or twice.
3. What is the range of Priva II?
Up to 10m/30 feet line of sight. Priva II works best if there is a clear path from the antenna to
the receiver
4. How do you reset (clear paired device info) Priva II?
Step 1. Set Priva II to pairing mode – press and hold ❹ for 2~4 seconds until the LED flashes
BLUE and RED alternately.
Step 2. Double click the ❹ MFB, then you will see the BLUE and RED LEDs flash together
quickly.
Step 3. Power it off manually and then it will enter pairing mode automatically once power is on.
Option 3
3.5 mm audio cable RCA cable
~ 40ms
aptX codec
2. How do you reconnect?
Multi-link
Repeat above 2 & 3 steps to connect the
second device
Keep the devices close and wait until
the LEDs slow down together.
*
TV with RCA ANALOG
The audio delay will be
aptX Low Latency codec
3.5mm audio cable
Digital Optical Cable
1
If no USB
port on TV, you
can use a charger
DC
Digital Audio Converter
(please buy separately)
AUX
3.5 mm audio cable
Battery
1. Why is there still a delay?
5. How do you charge / power Priva II?
You can connect Priva II via the supplied micro USB cable to your own USB chargers
(wall charger/travel charger/mobile phone charger, etc.) with 5V/500mA-1A, or PC/TV USB port.
More FAQs on support.avantree.com
Video user guide for Priva II on Youtube.com
Telephone support: booking from Avantree.com
24h Email support: support@avantree.com
5
Scan for video user guide
English
❶ LED indicator
Connect Priva II to an audio source
English
English
Priva II Quick User Guide