DATASHEET EFFI-FD
Range : EFFI-FD
Last update : June 20, 2013
HOMOGENOUS AND POWERFUL FLAT DOME
EFFI-FD






Intense illumination
Diffuse light
High Homogeneity
Standard connections and fasteners
Available from 100*100 mm² to 1000*1500 mm²
Long lifetime and few maintenance
APPLICATIONS:
Light used : EFFI-FD_300_300_000
Benefits: Reproduce the effects of a dome illumination in a compact design
Alternative to a ring light
High output, uniform diffused light
Inspections: Reflective item, plastic, metal, glass
OVERVIEW OF THE CHARACTERISTICS
Electronics
Optics
Mechanics
Environment
EFFILUX
7 Avenue de l’Atlantique
91940 LES ULIS
FRANCE
Power supply
Illumination mode
Connectors
Power consumption
Cable length
Wavelength
Output window
Thickness
Dimensions
Fastener
Material
Working temperature
IP code
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr
24V DC
Continuous with a DIM process [0,24V]
M12 4 pins
Related to the dimensions
500mm from the side to the connector
Various wavelengths (blue, red, green, IR and white)
Opalin to homogenize the light repartition
43.2mm
Any multiple of 50mm
A groove all around the device
Base and side panels : Aluminum alloy ; Diffusion plate : acrylic
0°C to 50°C (no condensation)
IP54
Page 1 / 4
TECHNICAL CHARACTERISTICS
How to create the EFFI-FD?
EFFI-FD_XXX_XXX_XXX_S150_XCX
Connectors position
Power version
Length (mm)
Available wavelengths:
•
•
•
•
•
White – reference 000
Blue – reference 460
Green – reference 525
Red – reference 625
Infrared – reference 850
Width (mm)
Wavelength (nm)
Power version
•
Connectors position
150mA configuration Strobed
mode. Only for white (000)
NB: Standard configuration is at 50mA
• XCA: connectors on the same side (config. A)
• XCB: connectors on opposite side (config. B)
NB: Details on those two configurations are addressed in the
following section
Other configurations are available upon
request
Other wavelengths are available upon request
Additional configurations:
• Position of a single connector
The backlight is designed to present a connector on the longer side of the device. Nevertheless, it can be modified and
be placed on the smallest side. In this configuration, a C is added at the end of the device name.
• Reduction of the size of the edge of the device
Add a ‘T’ in the reference after the dimension that needs to be reduced.
Optical characteristics
High luminosity and high uniformity
Variation of the luminance vs angle
cd/m²
(in white)
14000
12000
10000
8000
6000
4000
2000
0
0
20
40
deg
Diffused, even illumination of standard dome lights
Direct illumination
EFFILUX
7 Avenue de l’Atlantique
91940 LES ULIS
FRANCE
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr
EFFI-FD illumination
Page 2 / 4
60
80
Electrical characteristics
Electrical connections of the backlight
The backlight is connected to the power supply using a 4 pins connector.
45°
2
3
1
4
Pin number
Cable color
Designation
1
Brown
+24V
2
White
n.a.
3
Blue
GND
4
Black
DIM – max 24V
Make sure that you never exceed the maximum voltage.
The device is supplied with a 24V (±5%) constant voltage source.
Depending on the size of the device, different configurations are considered.
Optical width (mm)
White device –
50mA
Optical length (mm)
100
150
200
250
300
400
500
600
800
1000
1500
100
7
11
14
18
21
28
35
42
56
70
105
150
11
16
21
26
32
42
53
63
84
105
158
200
14
21
28
35
42
56
70
84
112
140
210
250
18
26
35
44
53
70
88
105
140
175
263
300
21
32
42
53
63
84
105
126
168
210
315
350
25
37
49
61
74
98
123
147
196
245
368
400
28
42
56
70
84
112
140
168
224
280
420
Power
Amount of connectors
450
32
47
63
79
95
126
158
189
252
315
473
6 W to 80W
1
500
35
53
70
88
105
140
175
210
280
350
525
85W to 170W
2
600
42
63
84
105
126
168
210
252
336
420
630
170W to 270W
3
800
58
84
112
140
168
224
280
336
448
560
840
280W to 370W
4
1000
70
105
140
175
210
280
350
420
560
700
1050
More than 370W
Specific configuration
Remark: For devices operating at 150mA, the amount of connectors will have to be discussed.
Electrical behavior of the device
The DIM pin has to be used: if not, the device is OFF.
Apply a constant voltage, lying between 0V and 24V, on this pin.
When a 24V voltage is applied, the device is at full power; if a 0V voltage is applied, the device is completely off.
Make sure that you never exceed the maximum voltage.
The device is supplied with a 24V (±5%) constant voltage source.
EFFILUX
7 Avenue de l’Atlantique
91940 LES ULIS
FRANCE
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr
Page 3 / 4
Mechanical considerations
Mechanical configurations
Standard configuration
Thin edge configuration
15mm
35mm
Length = optical length + 36mm
Width = optical width + 10mm
Width = optical width + 39mm
1.5mm
Ø=39mm
5mm
Length = optical length + 39mm
Threaded M5 screw
Threaded M5 screw
Countersunk M5 screw
Countersunk M5 screw
20 mm
20 mm
43.2 mm
12.65 mm
40mm
11.15mm
2.6 mm
2.6 mm
1.1 mm
Remark: The connector is on the thick side of the device
0.9 mm
EFFILUX
7 Avenue de l’Atlantique
91940 LES ULIS
FRANCE
1.1 mm
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr
Page 4 / 4
Electrical configurations
Configuration B
Configuration A
14.15 mm
12.65 mm
35 mm
60 mm
90 mm
Description of the accessory
Verticale camera
Horizontale camera
40mm
20mm
Camera support
Camera support
Height can be adjusted: 140mm
Height can be adjusted: 140mm
(178.5mm for EFFI-FD_100_100)
(178.5mm for EFFI-FD_100_100)
Base plate
Base plate
130mm
Holes positions and
dimensions to maintain
the camera
38.54mm
60mm
14.35mm
8.31mm
11.75mm
Ø4.3mm
Ø3.2mm
98.
1m
m
35
m
m
24.48mm
61.25mm
58.
54
m
m
120mm
28.98mm
18.75mm
19.91m
50mm
EFFILUX
7 Avenue de l’Atlantique
91940 LES ULIS
FRANCE
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr
Page 5 / 4
ACCESSORIES
Mechanics
EFFILUX reference
Description
EFFV-Bolt_0011
T-nut to insert in the slot – For M6 screw
EFFM_1_0017
Bracket to fasten the EFFI-BL (no ridge)
Delivered with 2 EFFV-Bolt_0011, 2 screws and 2 flat washers
EFFM_1_0019
Bracket to fasten the EFFI-BL (1 ridge)
Delivered with 2 EFFV-Bolt_0011, 2 screws and 2 flat washers
EFFM_1_0021
Bracket to fasten the EFFI-BL (2 ridges)
Delivered with 2 EFFV-Bolt_0011, 2 screws and 2 flat washers
EFFM_1_0002
Fastener used to simplify the projector integration (orientation)
Delivered with EFFV-Bolt_0011 and 2 M6x14 screws
EFFI-FD-camera
Accessory to be mounted on the EFFI-FD to facilitate camera attachment.
Compatible with most of machine vision cameras.
EFFC-Cable_M12_0002
M12 cable – 4 pins – 2m long
EFFC-Cable_M12_0003
M12 cable – 4 pins – 5m long
EFFC-Cable_M12_0004
M12 cable – 4 pins – 10m long
EFFC-Cable_M12_0025
M12 cable – 4 pins – High Flex- 1500mm long
EFFC-Cable_M12_0026
M12 cable – 4 pins – High Flex- 3000mm long
Electronics
Binder : 79 343 13 04
Binder : 79 3430 17 04
Binder : 79 3430 30 04
Phoenix : 1456938
Phoenix : 1456941
EFFILUX
7 Avenue de l’Atlantique
91940 LES ULIS
FRANCE
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr
Page 6 / 4