GEMINI PULSAR2 BLUETOOTH ADAPTER
THE GEMINI PULSAR2 BLUETOOTH ADAPTER PROVIDES A WIRELESS SERIAL LINK
BETWEEN PULSAR2 AND A SMARTPHONE, TABLET OR LAPTOP. (IPHONE IS
NOT COMPATIBLE)
Installation and use
Plug the unit into the Pulsar2 AUX port (NOT LAN) with the provided cable.
Pulsar2 can be powered before or after connection.
The red LED on the unit will light up if the connection was successful.
Start a bluetooth device scan on your mobile device.
When you are asked for the security code, enter 0000 (four zeros).
Now you can start your
lx200 compatible App on
your smart-phone or
connect to Pulsar2 via the
new virtual serial port
(you can read the port
number from the Device
Manager).
The com port speed must
be set to 9600baud an
both sides
(system/lx200baud menu)
GTD Jan.2015 www.geminitelescope.com