Milesight NVR Quick Start Guide

Quick Start Guide
1
V 4.03
www.milesight.com
Quick Start Guide
Table of Contents
1.Package Contents......................................................................................................... 1
2.Hardware Overview..................................................................................................... 3
3.Interfaces......................................................................................................................6
4. Installation.................................................................................................................11
4.1 Mini (PoE) NVR 1000 Series Installation...........................................................11
4.2 Pro/PoE NVR 5000 Series Installation...............................................................14
4.3 Pro/PoE NVR 7000 Series Installation...............................................................21
4.4 Pro NVR 8000 Series Installation...................................................................... 26
5. Connection Overview................................................................................................32
6. Ready to Start............................................................................................................34
7. Access to NVR............................................................................................................35
7.1 Search the NVR via Smart Tools........................................................................35
7.2 Via WEB............................................................................................................. 36
7.2.1 Log-in........................................................................................................36
7.2.2 Live View.................................................................................................. 38
7.3 Via Monitor....................................................................................................... 39
www.milesight.com
Quick Start Guide
1.Package Contents
Mini (PoE) NVR:
Mini NVR
Mini PoE NVR
x1
x1
x1
x1
x1
x1
x1
-
-
x1
-
x1
x8
x4
NVR
Contents
NVR
Screwdriver
Quick Start Guide
Power Adaptor
Power Adaptor
Power Cord
HDD Screw
1
www.milesight.com
Quick Start Guide
Pro/PoE NVR:
NVR
Pro/PoE 5000
Pro/PoE 7000
Pro 8000
NVR
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x 1 (Pro 5000)
-
-
x 12
x 16
x 32
x4
-
-
x8
-
-
x2
-
-
-
x2
-
-
-
x2
x8
x8
x8
Contents
Quick Start Guide
Mouse
Power Cord
Power Adaptor
HDD Screw
HDD Bracket
HDD Bracket Screw
Mounting Bracket
Mounting Bracket
Mounting Bracket
Mounting Bracket Screw
www.milesight.com
2
Quick Start Guide
2.Hardware Overview
Mini NVR:
Screws
LED Indicator
Ventilation Hole
Interface Panel
Mini PoE NVR:
Screws
LED Indicator
Ventilation Hole
Interface Panel
3
www.milesight.com
Quick Start Guide
Mini NVR:
80mm
120mm
80mm
Mini PoE NVR:
115mm
180mm
115mm
www.milesight.com
4
Quick Start Guide
Pro/PoE 5000:
Pro/PoE 7000:
Pro 8000:
5
www.milesight.com
Quick Start Guide
3.Interfaces
Mini NVR:
HDMI
LAN
USB
Mini PoE NVR:
DC 12V
Reset
PoE Port 1/2/3/4
HDMI
USB
Power
LAN
www.milesight.com
Power
6
Quick Start Guide
Pro 5000:
7
www.milesight.com
Quick Start Guide
PoE 5000:
Alarm In
PoE Port 1/3/5/7
VGA
USB
Alarm Out
Power Button
AC 100-240V
50-60HZ
PoE Port 2/4/6/8
Audio Out
HDMI
LAN
www.milesight.com
Grounding
8
Quick Start Guide
Pro 7000:
RS-232
Power
HDMI
Audio In
Alarm Out
Lock Hole
LAN1
LAN2
VGA
Audio Out
Alarm In
USB
AC 100-240V
50-60HZ
Grounding
PoE 7000:
Audio In
Lock Hole
RS-232
PoE Port
Alarm Out
HDMI
Power
PoE Port 2/4/6/8/10/12/14/16
LAN
Audio Out
9
AC 100-240V
50-60HZ
Grounding
VGA
USB
www.milesight.com
Alarm In
Quick Start Guide
Pro 8000:
AC 100-240V 50-60HZ
Power Button
Lock Hole
Audio In
HDMI 2
LAN 1
LAN 2
HDMI 1
eSATA
Alarm Out
RS-232
VGA 2
VGA 1
USB
Alarm In
Grounding
Audio Out
www.milesight.com
10
Quick Start Guide
4. Installation
4.1 Mini (PoE) NVR 1000 Series Installation
Step1: Remove the screws at the bottom panel and pull up the casing.
Step2: Insert SATA HDD in the slot as required.
(Mini NVR)
Quick Start Guide
(Mini PoE NVR)
Note: Mini NVR supports two SATA HDD (2.5”). Mini PoE NVR supports one
SATA HDD (3.5”).
Step3: Secure the HDD with screws.
(Mini NVR)
www.milesight.com
12
Quick Start Guide
(Mini PoE NVR)
Step4: Push down the casing and tighten the screws.
13
www.milesight.com
Quick Start Guide
4.2 Pro/PoE NVR 5000 Series Installation
Step1: Using a cross screwdriver to remove the screws at the back panel in an
anticlockwise direction.
(Pro 5000)
(PoE 5000)
www.milesight.com
14
Quick Start Guide
Step2: Slide the upper casing to the right first and lift it up.
Step3: The internal structure of Pro/PoE 5000 is shown as below.
(Pro 5000)
15
www.milesight.com
Quick Start Guide
(PoE 5000)
Step4: Hard Disk Installation: Lock the hard disk with the HDD bracket. 6
screws for each hard disk installation.
www.milesight.com
16
Quick Start Guide
Step5: Secure the HDD brackets with hark disks in the casing. 4 screws for each
HDD bracket.
(Pro 5000)
(PoE 5000)
17
www.milesight.com
Quick Start Guide
Step6: After that, check if all the screws are tightened. Then connect the
power cable and data cable to each HDD.
(Pro 5000)
(PoE 5000)
www.milesight.com
18
Quick Start Guide
Step7: Pull down the upper casing and slide it to the left.
Step8: Retighten the screws on the back.
(Pro 5000)
19
www.milesight.com
Quick Start Guide
(PoE 5000)
www.milesight.com
20
Quick Start Guide
4.3 Pro/PoE NVR 7000 Series Installation
Step1: Using a cross screwdriver to remove the screws at the back panel in an
anticlockwise direction.
(Pro 7000)
(PoE 7000)
21
www.milesight.com
Quick Start Guide
Step2: Slide the upper casing to the right first and lift it up.
Step3: The HDD bracket is rotatable and can be taken down by pulling up and
rotating one side of it.
(Pro 7000)
www.milesight.com
22
Quick Start Guide
(PoE 7000)
Step4: To install HDD more conveniently, you can:
1) Remove the bracket.
(Pro 7000)
23
www.milesight.com
Quick Start Guide
2) Install the HDD on the bracket.
3) After securing the HDD on bracket, insert the bracket back to the NVR.
(PoE 7000)
Step5: Check if all the 16 screws in HDD bracket are screwed tightly, if not,
screw them tightly in an clockwise direction. And fix the bracket with a screw
in the middle of bracket. Then connect the power cable and data cable to each
HDD.
www.milesight.com
24
Quick Start Guide
(PoE 7000)
Step6: Pull down the upper casing and slide it to the left.
Step7: Retighten the screws on the back.
25
www.milesight.com
Quick Start Guide
(Pro 7000)
(PoE 7000)
4.4 Pro NVR 8000 Series Installation
Step1: Using a cross screwdriver to remove the screws at the back panel in an
www.milesight.com
26
Quick Start Guide
anticlockwise direction.
(Pro 8000)
Step2: Slide the upper casing to the right first and lift it up.
Step3: Using the screwdriver to remove the screw in the middle of HDD
bracket in an anticlockwise direction (Pro 7000 has only one HDD bracket and
27
www.milesight.com
Quick Start Guide
Pro 8000 has two, while the installation steps are the same).
Step4: The HDD bracket is rotatable and can be taken down by pulling up and
rotating one side of it.
Step5: Secure the HDD with 4 screws. Don’t screw tight and leave about 4mm
distance at the side of each screw nut. As the enlarged drawing shows:
www.milesight.com
28
Quick Start Guide
Step6: After securing each HDD with 4 screws, stuck the side with screw nuts in
the bracket’s slots and then slide down to fix the HDD in the bracket. Screw
tight with screwdriver.
Step7: Repeat the above steps to install HDD in the bracket. Remember to
check if you have screwed tight.
29
www.milesight.com
Quick Start Guide
Step8: Secure the 16 screws in HDD and fix the bracket with a screw in the
middle of it. Then connect the power cable and data cable to each HDD.
Step9: Pull down the upper casing and slide it to the left.
www.milesight.com
30
Quick Start Guide
Step10: Retighten the screws on the back.
(Pro 8000)
31
www.milesight.com
Quick Start Guide
5. Connection Overview
Connect different devices to the interfaces of NVR, taking Mini (PoE) NVR and
PoE 7000 NVR for example:
(Mini NVR)
(Mini PoE NVR)
www.milesight.com
32
Quick Start Guide
(PoE 7000)
33
www.milesight.com
Quick Start Guide
6. Ready to Start
Press the power button(this button is not available on Mini PoE NVR), the LED
Indicator will light steadily when it is connected to a power source, taking Mini
NVR and PoE 7000 NVR for example:
(Mini NVR)
(PoE 7000)
Note: Milesight 4-CH/8-CH/16-CH Plug and Play NVR features 4/8/16
independent PoE Ports. The software can automatically detect and configure
the network cameras just after being plugged the cable, greatly eliminating
the need for much time and expertise, and achieving a virtually hassle-free
installation process.
www.milesight.com
34
Quick Start Guide
7. Access to NVR
7.1 Search the NVR via Smart Tools
If the IP address of the NVR is unknown, please use the Smart Tools to search
the IP address. Smart Tools can automatically detect online Milesight NVRs
connected in the LAN. You can get the IP address of the NVR by searching in
the Tools.
Click on the NVR Tools button to enter the NVR Tools interface:
Network Page
35
www.milesight.com
Quick Start Guide
The specific steps are as follows:
Step1: Input the MAC address (marked as 1) to search your NVR;
Step2: Click on the area (marked as 2) to list the NVR one by one;
Step3: Click on your NVR in the list (marked as 3), then you can change the
parameters including the IP address, Port, Netmask, Gateway and DNS. Click on
“Modify” button to apply the settings. (Default IP address of NVR is
192.168.5.200. )
Step4: Click on the Browser button (marked as 4) to access to the web page of
the NVR;
(Default user name and password of NVR are “admin” and “ms1234”.)
Note: You can get more information about Smart Tools from the User Manual.
7.2 Via WEB
7.2.1 Log-in
After the NVR being connected to the Internet, you can access to NVR via WEB
by IP address.
The specific steps are shown as follows:
Step1: Launch the Firefox or other browsers;
Step2: In the address bar of the browser, input the IP address of the device. For
example, http://192.168.8.156 . After that, the log-in page will pop up;
Step3: (You can choose the language before logging in) Input the correct user
name and password. Click on the Log-in button to enter the Live View page.
(Default user name and password of NVR are “admin” and “ms1234”.)
www.milesight.com
36
Quick Start Guide
Note:
1. If the HTTP Port number is not the default number 80, please input the IP
address as follows: http://IP:Port .
37
www.milesight.com
Quick Start Guide
2. If it’s your first time to access to NVR via WEB, please install the plug-in. And
please close the browser before installing the plug-in.
7.2.2 Live View
After logging in the NVR, you can add cameras to the NVR through the camera
settings. After adding cameras, please click on the Live View button to get the
preview. (Default user name and password of network camera are “admin” and
“ms1234”.)
Details are shown as follows:
www.milesight.com
38
Quick Start Guide
Note: About other configurations, you can refer to the user manual of NVR.
7.3 Via Monitor
There is another way to access to NVR which you can use the HDMI cable to let
the NVR combine with monitor.
(Default user name and password of NVR are “admin” and “ms1234”.)
After running the NVR, you can do some configurations according to the
wizard.
Details are shown as follows:
39
www.milesight.com
Quick Start Guide
Password Modifying
Time Setting
Network Setting
www.milesight.com
40
Quick Start Guide
Camera Adding
Also you can skip the wizard, then add cameras in Camera Management.
Details are shown as follows:
Camera Management
41
www.milesight.com
Quick Start Guide
Camera Settings
After adding cameras successfully, you can choose the Live View to preview.
Live View
www.milesight.com
42
Quick Start Guide
NVR Series
Thank you
for choosing
Milesight Product
© 2016 Milesight Technology Co., Ltd.
43
www.milesight.com
www.milesight.com