High-Resolution, Auto-focus, Colour Dome Camera with 22x Optical

High-Resolution, Auto-focus,
Colour Dome Camera
with 22x Optical Zoom,
in Vandal-Resistent Housing
CVAS1415-LPO
Autofocus
Day/Night
Camera
z Auto-focus camera / lens / vandal resistant housing
z High-resolution day/night dome camera 480/530 TVL
z Sensitivity: colour = 0.5 Lux at F1.6 (AGC on, 50 IRE) / B/W = 0.001 lux
z Digital Noise Reduction (DNR)
z Automatic Exposure (AE)
z Wide Dynamic Range (WDR)
z Automatic White Balance (AWB)
z Automatic Gain Control (AGC)
z Programmable Back Light Compensation (BLC)
z Support camera control available RS-485
z OSD screen menu
z PIP (Picture In Picture)
z Dual power operation 24 V AC/12 V DC
Fire Safety & Security Products
Siemens Building Technologies
The CVAS1415-LPO is a high-resolution (480/530 TVL) day/night camera with built-in
autofocus zoom lens with max. 242x zoom. The camera is designed for outdoor use
under variable lighting conditions. It is built into a compact and attractively styled vandal
resitant dome housing. As a result of the day/night function, the camera offers optimum
picture quality both under varying daylight conditions and also when used at night with
IR light.
All the camera settings such as white balance, exposure settings, setting of back light
compensation (BLC), Line-Lock synchronisation or digital noise reduction are done via
the OSD menu. Each camera can have an individual camera text assigned to it. It is
possible to specify via the display menu which text and which detailed information for
the setting of the camera is to be displayed in the video image.
The camera offers the option to be switched from day to night operation by means of an
external switch. The status of the camera can be superimposed in the video image.
A small live image can be superimposed by means of the PIP function. In this way it is
thus possible to freeze an image sequence with the freeze function while the live image
continues to be displayed in the PIP window.
The camera can be controlled and parameterised with the Siemens SCU protocol, the
Bewator-Molynx protocol, or the Pelco protocol via the built-in RS485 interface.
In addition, the camera is equipped with a keypad that allows all functions to be controlled directly via the OSD menu.
Dimensions
2
Siemens Building Technologies
Fire Safety & Security Products
10.2007
Technical data
Power supply
Power consumption
Image sensor
Total pixels
Scanning system
Scanning frequency
Sync. system
Resolution
Min. illumination
Video output
S/N ratio
Camera control
Focus mode
White balance
Auto exposure
Iris control
AGC
Shutter speed
BLC
Title
Display
CAM ID
BPS
Brightness
Sharpness
Distance
Slow shutter
Effect
User Set
DNR
SHOT
Zoom ratio
Focus length
Aperture ratio
Power input
Video output
Operating temperature
Operating temperature
Switch on temperature
Relative humidity
Storage temperature
Weight
Protection type
12 V DC/24 V AC
6.0 W (without heater kit)
1/4" SONY Super HAD CCD
795 (H) x 596 (V)
2:1 interlace
15.625 KHz (H),
50 Hz (V)
Internal: cristal /external: Line Lock
480 TV lines (colour), 530 TV lines (B/W)
0.5 lux (colour) @ F=1.6 (AGC on, 50 IRE video output), 0.05 lux (B/W),
0.001 lux (slow shutter)
1.0 Vpp (75 Ohm, composite)
> 50 dB (AGC off)
RS-232 – Siemens B (parameter setting)
RS-485 – Siemens B, S; Molynx; Pelco D, P
Auto/Manual/Push AF
AWB/Indoor/Outdoor/Manual/WAWB
Auto/Iris PRI/Shutter PRI/AGC/Manual
Auto/Manual (F1.6 – F32)
On/Off (max. 30 dB)
Normal – 1/10,000
Off/BLC1/BLC2/BLC3/BLC4/BLC5/BLC6/Level
A–Z/0–9
On/Off/Push On (DISP0/DISP1/DISP2)
001 – 255
2400/4800/9600/19200
0 – 90 steps
0 – 15 steps
0.1 M/1.0 M/1.5 M/2.5 M/6.0 M
x2 – x60
D-Zoom, Nega/Posi, B/W, Mirror, PIP, Freeze, D/N Mode, D/N Level, D/N Delay
INIT/LOAD/SAVE
On/Off
Normal/DIS/WDR/Slow-shutter
Optical zoom x22, digital zoom x11 (video AF)
f = 3.8 – 85.8 mm
F1.6 (wide) – F3.7 (tele)
3-pin terminal block
BNC connector
-10 to +50 °C (with heater kit)
0 to +50 °C
Min. -10 °C
0 – 96% (non-condensing)
-20 to+60 °C
1100 g
IP66
3
Siemens Building Technologies
Fire Safety & Security Products
10.2007
Heater kit
Power supply
Power consumption
Heater on/off
12 V DC / 24 V AC
10 W / 20 W
+5 °C / +15 °C
Details for ordering
Type
CVAS1415-LPO
Order No.
2GF1182-8AN
CVAA-HK01
S54561-C2-A1
Designation
1/4" Hi-Res D/N CCD Dome Camera PAL
480 TVL, Autofocus, 12 V DC / 24 V AC, 6.0 W,
50 Hz
Heater kit for CVAx Dome
Weight
1100 g
150 g
© Siemens Building Technologies
Document No.: A6V10072495, Edition: 10/07
Data subject to change without notice