FLB3678 CRADLE Quick Reference Guide (en)

Use ONLY a Zebra approved UL LISTED ITE (IEC/EN 60950-1, LPS/SELV) power supply with
electrical ratings: Output 12Vdc, min 4.16A, with a maximum ambient temperature of at least 50
degrees C. Use of alternative power supply will invalidate any approvals given to this unit and may be
MN002336A02 Revision A - August 2016
Power Supply
CAUTION Operation of the device without regulatory approval is illegal.
Industrial Scanner Cradle
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to ensure that you
are adhering to your company’s safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Ergonomic Recommendations
Health and Safety Recommendations
Zebra reserves the right to make changes to any product to improve reliability, function, or
design. Zebra does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein. No license is granted,
either expressly or by implication, estoppel, or otherwise under any patent right or patent,
covering or relating to any combination, system, apparatus, machine, material, method, or
process in which Zebra products might be used. An implied license exists only for equipment,
circuits, and subsystems contained in Zebra products.
Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones,
relativa a radiaciones electromagnéticas.
Service Information
Bluetooth® Wireless Technology
Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU
and 1999/5/EC or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017). The
full text of the EU Declaration of Conformity is available at the following internet address:
Statement of Compliance
Declared maximum operating temperature: 50oC.
Only use Zebra approved and UL Listed accessories, battery packs and
battery chargers.
Do NOT attempt to charge damp/wet batteries. All components must be dry
before connecting to an external power source.
This device is approved under Zebra Technologies Corporation.
This guide applies to the following Model Number: FLB3678
All Zebra devices are designed to be compliant with the rules and regulations in the locations
they are sold and will be labeled as required.
Local language translations are available at the following website: http://www.zebra.com/doc.
Any changes or modifications to Zebra equipment not expressly approved by Zebra could void
the user's authority to operate the equipment.
Regulatory Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
If you have a problem using the equipment, contact your facility’s Technical or
Systems Support. If there is a problem with the equipment, they will contact Zebra
Support at: http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support.
This is an approved Bluetooth product. For more information or to view End Product Listing,
please visit https://www.bluetooth.org/tpg/listings.cfm.
Radio Transmitters (Part 15)
South Korea
Korean Warning Statement for Class B ITE
i ἽGὤὤ
O ᴴ㥉㟝Gⵝ㋕䋩㐔ὤὤ P
㢨Gὤὤ⏈Gᴴ㥉㟝 Oi Ἵ P 㡰⦐G㤸㣄䑀㤵䚝☥⦑㡸
㡰⦐G䚌⮤ SG⯜☔G㫴㜡㜄㉐G㇠㟝䚔G㍌G㢼㏩⏼␘ U
Marking and European Economic Area (EEA)
Bluetooth® Wireless Technology for use through the EEA have the following restrictions:
Maximum radiated transmit power of 100mW EIRP in the freq. range 2.400 -2.4835 GHz
Warnings for Use of Wireless Devices
Caution: Please observe all warning notices with regard to the usage of wireless devices.
Potentially Hazardous Atmospheres - Vehicles Use
Class B ITE
You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical
plants, etc. and areas where the air contains chemicals or particles such as grain, dust, or metal
powders and any other area where you would normally be advised to turn off your vehicle engine.
Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or
healthcare facilities. These requests are designed to prevent possible interference with sensitive
medical equipment.
Japan (VCCI) - Voluntary Control Council for Interference
Safety in Hospitals
Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between
a hand-held wireless device and a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with independent research and recommendations by Wireless
Technology Research.
Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.
Should not carry the device in a breast pocket.
Should use the ear furthest from the pacemaker to minimize the potential for interference.
If you have any reason to suspect that interference is taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if the operation
of your wireless product may interfere with the medical device.
Waste Electrical and Electronic Equipment (WEEE)
Radio Frequency Interference Requirements-Canada
Radio Transmitters - This device complies with Industry Canada's license-exempt RSS's. Operation is
subject to the following two conditions: (1) This device may not cause interference; and (2) This device
must accept any interference, including interference that may cause undesired operation of the device.
Vehicle Installation
For more information consult the website www.anatel.gov.br
Declarações Regulamentares para STB/FLB3678 - Brazil
Nota: A marca de certificação se aplica ao Transceptor, modelo STB/FLB3678. Este equipamento
opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando
em caráter primário.
Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela
Resolução n°242/2000 e atende aos requisitos técnicos aplicados, incluindo os limites de exposição da
Taxa de Absorção Específica referente a campos elétricos, magnéticos e eletromagnéticos de
radiofrequência, de acordo com as Resoluções n° 303/2002 e 533/2009.
Este dispositivo está em conformidade com as diretrizes de exposição à radiofrequência quando
posicionado pelo menos 20 centímetros de distância do corpo. Para maiores informações, consulte o
site da Anatel.
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment in an outlet on a circuit different from the receiver is connection
• Consult the dealer or an experienced radio/TV technician for help
This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson
Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees
that cannot be excluded under the Australia Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
Zebra Technologies Corporation Australia's limited warranty above is in addition to
any rights and remedies you may have under the Australian Consumer Law. If you
have any queries, please call Zebra Technologies Corporation at +65 6858 0722.
You may also visit our website: http://www.zebra.com for the most updated warranty
Wireless Device Country Approvals
To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must
not be co-located or operating in conjunction with any other transmitter/antenna except those already
approved in this filling.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and
your body.
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre la source de rayonnement et votre corps.
Remote and Standalone Antenna Configurations
To comply with FCC RF exposure requirements, antennas that are mounted externally at remote
locations or operating near users at stand-alone desktop of similar configurations must operate with a
minimum separation distance of 20 cm from all persons.
RF signals may affect improperly installed or inadequately shielded electronic systems in motor
vehicles (including safety systems). Check with the manufacturer or its representative regarding
your vehicle. You should also consult the manufacturer about any equipment that has been
added to your vehicle.
US and Canada
China RoHS
Remote and Standalone Antenna Configurations - To comply with EU RF exposure requirements,
antennas that are mounted externally at remote locations or operating near users at stand-alone
desktop of similar configurations must operate with a minimum separation distance of 20 cm from all
Radio Frequency Interference Requirements-Brazil
For the complete Zebra hardware product warranty statement, go to:
For Australia Only:
Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/
are approved for use in the following countries: United States, Canada, Japan, China, South
Korea, Australia, and Europe.
Quick Reference Guide
Please refer to the Declaration of Conformity (DoC) for details of other country markings. This
is available at: http://www.zebra.com/doc.
Only operate the device in accordance with the instructions supplied. The device complies with
internationally recognized standards covering human exposure to electromagnetic fields from radio
devices. For information on “International” human exposure to electromagnetic fields refer to the Zebra
Declaration of Conformity (DoC) at http:www.zebra.com/doc.
For further information on the safety of RF energy from wireless devices, see
http://responsibility.zebra.com/index.php/downloads/, which is located under Wireless Communications
and Health.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
Note: Europe includes, Austria, Belgium, Bulgaria, Croatia,Czech Republic, Cyprus, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic,
Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Reducing RF Exposure – Use Properly
Cet appareil est conforme exempts de licence le flux RSS de Industrie Canada. Son fonctionnement est
soumis aux deux conditions suivantes:
(1) Ce dispositif ne peut causer des interférences; et (2) Cet appareil doit accepter toute interférence,
y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many
jurisdictions worldwide. All other trademarks are the property of their respective owners.
©2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All
rights reserved.
RF Exposure Guidelines
Bulgarish: За клие нти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Zebra
за ре циклиране . За инф ормация относно връщането на продукти, моля отидете на адре с:
Če š tina: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti Zebra
k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce:
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs oplysningerne
om returnering af produkter på: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an
Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http://
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να επιστρέφονται
στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή ενός προϊόντος,
επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Zebra'ile.
Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee.
English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For
information on how to return product, please go to: http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de su ciclo
de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite:
Français: Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Zebra
pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere
restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il
seguente sito Web: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otrreizējai
pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją
„Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás
céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a
http://www.zebra.com/weee weboldalra.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand
Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur:
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden
teruggezonden voor recycling. Raadpleeg
http://www.zebra.com/weee voor meer informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy Zebra w celu
ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para reciclagem.
Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.
Românesc: Pe ntru clie nţii din UE: Toate produs e le , la s fârş itul durate i lor de funcţionare , tre buie re turnate la Zebra
pe ntru re ciclare . Pe ntru informaţii de s pre re turnare a produs ului, acce s aţi: http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za reciklažo. Za
informacije o vračilu izdelka obiščite: http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti vrátené
spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön, kun
tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee.
Suomi: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för återvinning.
Information om hur du returnerar produkten finns på http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade edilmelidir.
Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://www.zebra.com/weee.
TURKISH WEEE Statement of Compliance
The FLB3678 cordless scanner cradle acts as charger and radio communication
interface for the XX3678 cordless scanner. It attaches to a mounting bracket using three
isolators. The bracket is then mounted on the forklift surface.
The FLB3678 cradle receives data from the scanner via a Bluetooth radio, and sends
that data to the host through an attached cable. The cradle also charges the scanner’s
internal battery pack when the scanner is inserted. A portable power supply on the
forklift supplies power to the cradle.
This document provides basic instructions on setting up and using the cradle. Any
discussion of transmission of information refers specifically to the FLB3678 cradle.
Cradle Connections
IMPORTANT Connect the interface cable and power supply (if necessary) in
CAUTION LS3578 and DS3578 cordless scanners are incompatible with
FLB3678 cradles.
Equipment Supplied
The cradle package includes:
• Cradle
• Mounting bracket with isolators
• Three 8-32 x 1.5” Phillips head screws (for attaching cradle to mounting bracket).
The following equipment may be needed:
• Three 1/4-20 screws, minimum length 1.0” (for fastening bracket to mounting
Save the shipping container for storing or shipping. Inspect all equipment for damage. If
anything is damaged or missing, call an authorized Zebra Support Center immediately.
Related Documentation
LI3678 Product Reference Guide, p/n MN001740Axx.
LI3678 Quick Start Guide, p/n MN002323Axx.
DS3678 Product Reference Guide, p/n MN-002689-xx.
DS3678 Quick Start Guide, p/n MN002648Axx.
STB3678 Quick Reference Guide, p/n MN002334Axx.
Forklift Mounting Plate Template, p/n MN-002769-xx.
the following order to ensure proper operation of the scanner
and cradle.
Connect the appropriate cable to the
Host Port
power supply and an AC power source, if
(Under Latch)
necessary. This will ensure detection of the
host and prevent inadvertently back
powering the cradle from improper
detection of the host.
Insert the interface cable into the host port.
Lift the cradle latch and insert interface
cable into the cradle's port with the cable
connector latch facing up (away from the
cradle). Secure the cable by closing the
cradle latch.
As necessary, thread the host cable under
the cable hook and into the groove.
Pair the scanner to the cradle either by
inserting it in the cradle (if Pair on Contacts
is enabled) or by scanning the pairing bar
If necessary, scan the appropriate host bar
code (for non-autodetected interfaces).
Refer to the Product Reference Guide.
Changing the Host Interface
To connect to a different host, or to the same host through a different cable:
1. Unplug the interface cable from the host.
2. Unplug the power supply from the cradle.
3. Connect the interface cable to the new host, or the new interface cable to the
existing host.
4. Reconnect the power supply, if required.
5. If necessary, scan the appropriate host bar code (for non-autodetected interfaces).
Refer to the Product Reference Guide.
Using a Host Interface to Supply Power
Some hosts can provide power to the cradle via the host interface, instead of an external
power supply.
This documentation is available at: www.zebra.com/support.
CAUTION Always disconnect the DC power supply BEFORE disconnecting
the cable to the host end or the cradle may not recognize the new
Cradle Parts
Horizontal Mount
1. Ensure the desk/wall mount
converter knob is in the correct
position, shown at right.
2. If mounting the cradle horizontally
where no fastening is necessary,
peel the protective paper from the
back of the rubber feet included
with the cradle packaging, and
attach the feet to the cradle at the
indentations in the plastic. These
feet provide traction and prevent
surface damage.
Canopy Latch
Bar Code
Drain Hole
Screw Hole
Screw Hole
Drain Hole
Bottom View
Rubber Feet
Host Cable Latch
Screw Hole
Host Cable (Under Latch)
Host Cable
Foot Latch
Rubber Feet
Screw Hole
The cradle receives data from the scanner via a wireless radio connection and transmits it
to the host computer via the host cable. The scanner and cradle must be paired for
successful wireless communication.
NOTE The pairing bar code that connects the scanner to a cradle is unique to
each cradle.
Do not scan data or parameters until pairing completes.
Pairing registers a scanner to the cradle such that the scanner and cradle can exchange
information. The FLB3678 operates in two modes: Point-to-Point and Multipoint-to-Point. In
Point-to-Point mode, pair the scanner to the cradle either by inserting it in the cradle (if pair
on contacts is enabled), or by scanning the pairing bar code. In Multipoint-to-Point mode,
you can pair up to seven scanners to one cradle.
To pair the scanner with the cradle, scan a pairing bar code. A high-low-high-low beep
sequence followed by a low-high beep sequence indicates successful pairing and
connection to the remote device. A long low, long high beep sequence indicates
unsuccessful pairing.
Lost Connection to Host
If scanned data does not transmit to the cradle’s host, ensure that all cables are firmly
inserted and the power supply is connected to an appropriate AC outlet, if applicable. If
scanned data still does not transmit to the host, reestablish a connection with the host:
1. Disconnect the power supply from the cradle.
2. Disconnect the host interface cable from the cradle.
3. Wait three seconds.
4. Reconnect the host interface cable to the cradle.
5. Reconnect the power supply to the cradle, if required.
6. Reestablish pairing with the cradle by scanning the pairing bar code.
128.30 mm
Power on
Green flashing
Bluetooth connection established
Page button
Battery Indications
2. Attach the interface and power
cables (see Cradle Connections).
Press the cables into the cable
Position the cradle on the
mounting surface, or use the
template included in this guide.
Mark the surface through the
three holes on the bottom of the
cradle, or use the mounting
template to determine the location
of the screw holes.
Pre-drill holes to accommodate
three 1.5" #8 Philips head screws.
Attach the cradle securely to the
Place the scanner in the cradle.
Sending Data to the Host Computer
Converter Knob
Horizontal Position
To mount the cradle on a vertical surface:
1. Use a Philips screwdriver to turn the desk/wall mount converter knob to the position
shown below. The front latches protract to engage the depressions at the base of the
scanner’s handle.
Screw Hole
28.65 mm
Cradle LED Indicators
NOTE Do not use the rubber feet when mounting in a vertical orientation.
Page Button
To insert the scanner in the cradle:
• Insert the scanner top first. Push the handle until it clicks into place, engaging the
contacts in the cradle and scanner.
When using a new battery in the scanner, the battery requires a charge to be enabled.
Insert the battery in the scanner and place the scanner in the FLB3678 cradle (see
Inserting the Scanner in the Cradle). The battery begins charging when the scanner LED
indicator starts flashing amber. The battery is fully charged when the cradle LED is solid
green. A complete charge of a fully discharged battery can take up to three hours using
external power and up to ten hours using the USB interface cable.
Vertical Mount
Foot Latch
57.30 mm
CAUTION Do not pour, spray, or spill any liquid on the cradle.
Charging the Scanner Battery in the Cradle
Mounting the Cradle
Top View
Wall Mount Template
Inserting the Scanner in the Cradle
Amber Blinking
Amber fast blinking
Charging error
Fully charged
If the cradle does not work after following the previous procedures:
• Check the system power.
• Check for loose cable connections.
• Check that the scanner is inserted properly in the cradle.
• Check that the host settings are correct and the cradle is connected to the appropriate
port on the host.
Converter Knob
Vertical Position
Forklift Mounting Plate
The forklift mounting plate (p/n BRKT-MM0036W-00) is required on forklift truck
installations to reduce long term damage to the scanner and cradle due to vibration. For
detailed information, refer to the Forklift Mounting Plate Template (p/n MN-002769-xx).
Cradle Mounting Holes
When printing the FLB3678 QRG which includes the wall mount template, ensure the
dimensions print correctly by setting the Page Sizing and Handling to Actual Size.
Download PDF
Similar pages