PQ-MDS-PCIEXP Adaptor

HW Getting Started Guide
PQ-MDS-PCIEXP
Adaptor
December 2005: Rev 0.5
PQ-MDS-PCIEXP Adaptor
HW Getting Started Guide
Step 1:Check HW kit contents
1.PQ-MDS-PCIEXP Adaptor
2.PIB (Platform I/O Board) to
PCIEXP riser cards (3 pcs.)
3.ATX Power supply
4.Power supply AC Cord and
adapters kit
5.Printed documentation for the
PQ-MDS-PCIEXP
6.PQ-MDS-PCIEXP Board
Documentation CD
(includes soft copies of the printed
documentation, in addition to a full
User Manual, BOM, and other
documents)
3
5
1
6
4
2
PQ-MDS-PCIEXP Adaptor, Rev 0.5
Freescale Semiconductor
Page 1 of 6
Step 2: If using a module in the
PMC0 slot, insert riser cards on
PIB
These riser cards are used to raise the
expansion adaptor to the proper height
when a module is installed in the PMC0
location (module not shown in figures).
Insert the three riser cards as shown,
starting from the PMC3 slot, and
continuing to the PMC1 slot.
Press down until they click in firmly.
Platform I/O Board (PIB)
PMC0 slot
Riser card
(not installed)
PMC1
PMC2
Riser cards
(installed)
PMC3
PMC3
rds
Installing riser ca
PMC2
PMC1
PMC0 slot
PQ-MDS-PCIEXP Adaptor, Rev 0.5
Page 2 of 6
Freescale Semiconductor
Step 3:Connect to PIB
Connect the PQ-MDS-PCIEXP Adaptor
to the PIB as shown. If a module is not
installed in the PMC0 slot, the riser
cards are not needed, as shown in the
figure.
If a module is installed in the PMC0 slot,
the riser cards must be used (refer to
Step 2 for instructions).
Press the PQ-MDS-PCIEXP Adaptor
firmly in until it clicks in place.
Connect expansion
adaptor as shown
Platform I/O Board (PIB)
expansion adaptor
PIB
expansion adaptor installed
PQ-MDS-PCIEXP Adaptor, Rev 0.5
Freescale Semiconductor
Page 3 of 6
Step 4:Connect power supply to
the PQ-MDS-PCIEXP Adaptor.
Note: There may be many different
types of power supply cords connected
to the ATX PSU. Use only the 20-pin
connector.
The PIB itself must also be connected to
its own power supply (see the
PQ-MDS-PIB User’s Manual for
instructions).
Power supply cord (20 pin)
Step 5:Insert agent card(s), in
accordance with your specific
needs
MPC83xx
Agent card installed
For complete details on working with the
PIB, the expansion adaptor (ie, the
PQ-MDS-PCIEXP Adaptor), and an
MPC83xx (as a host or agent), refer to
their respective User Manuals.
PIB
expansion adaptor
PQ-MDS-PCIEXP Adaptor, Rev 0.5
Page 4 of 6
Freescale Semiconductor
How to Reach Us:
Information in this document is provided solely to enable system and software implementers to use
Freescale Semiconductor products. There are no express or implied copyright licenses granted
hereunder to design or fabricate any integrated circuits or integrated circuits based on the information
USA/Europe/Locations Not Listed:
Freescale Semiconductor Literature Distribution Center in this document.
Freescale Semiconductor reserves the right to make changes without further notice to any products
P.O. Box 5405
herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the
Denver, Colorado 80217
suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any
1-800-521-6274 or 480-768-2130
liability arising out of the application or use of any product or circuit, and specifically disclaims any
and all liability, including without limitation consequential or incidental damages. “Typical” parameters
Japan:
that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary
Freescale Semiconductor Japan Ltd.
in different applications and actual performance may vary over time. All operating parameters,
Technical Information Center
including “Typicals”, must be validated for each customer application by customer’s technical experts.
3-20-1, Minami-Azabu, Minato-ku
Freescale Semiconductor does not convey any license under its patent rights nor the rights of others.
Tokyo 106-8573, Japan
Freescale Semiconductor products are not designed, intended, or authorized for use as components
81-3-3440-3569
in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the Freescale Semiconductor product
Asia/Pacific:
could create a situation where personal injury or death may occur. Should Buyer purchase or use
Freescale Semiconductor Hong Kong Ltd.
Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall
2 Dai King Street
indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and
Tai Po Industrial Estate
distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney
Tai Po, N.T., Hong Kong
fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
852-26668334
unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was
negligent regarding the design or manufacture of the part.
Home Page:
www.freescale.com
Learn More: For more information about Freescale products, please visit www.freescale.com.
Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other
product or service names are the property of their respective owners.
© Freescale Semiconductor, Inc. 2005. All rights reserved.
PQ-MDS-PCIEXP Adaptor, Rev 0.5
Freescale Semiconductor
Page 5 of 6
PQ-MDS-PCIEXP Adaptor, Rev 0.5
Page 6 of 6
Freescale Semiconductor