FCC Information and Copyright

A68N-5200/A68N-5000/A68N-3800/A68N-2100
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents
here and specially disclaims any implied warranties of merchantability or fitness
for any purpose. Further the vendor reserves the right to revise this publication
and to make changes to the contents here without obligation to notify any party
beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and we
will not be responsible for any mistakes found in this user’s manual. All the brand
and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ...............................................................1
1.1
1.2
1.3
1.4
1.5
1.6
Before You Start......................................................................... 1
Package Checklist ..................................................................... 1
Motherboard Specifications ....................................................... 2
Central Processing Unit (CPU).................................................. 3
Rear Panel Connectors ............................................................. 3
Motherboard Layout .................................................................. 4
Chapter 2: Hardware Installation ................................................5
2.1
2.2
2.3
2.4
2.5
Connect Cooling Fans ............................................................... 5
Install System Memory .............................................................. 6
Expansion Slots ......................................................................... 7
Jumper Setting .......................................................................... 8
Headers & Connectors .............................................................. 9
Chapter 3: UEFI BIOS & Software.............................................14
3.1
3.2
3.3
UEFI BIOS Setup .................................................................... 14
BIOS Update ........................................................................... 14
Software................................................................................... 18
Chapter 4: Useful Help ..............................................................21
4.1
4.2
4.2
4.3
Driver Installation..................................................................... 21
Extra Information ..................................................................... 22
AMI BIOS Beep Code.............................................................. 23
Troubleshooting ....................................................................... 23
Appendix: SPEC In Other Languages ......................................24
Arabic ......................................................................................................... 24
French ........................................................................................................ 25
German....................................................................................................... 26
Italian .......................................................................................................... 27
Japanese .................................................................................................... 28
Polish.......................................................................................................... 29
Portuguese ................................................................................................. 30
Russian....................................................................................................... 31
Spanish....................................................................................................... 32
A68N-5200/A68N-5000/A68N-3800/A68N-2100
CHAPTER 1: INTRODUCTION
1.1
Before You Start
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„ Prepare a dry and stable working environment with sufficient
lighting.
„ Always disconnect the computer from power outlet before
operation.
„ Before you take the motherboard out from anti-static bag,
ground yourself properly by touching any safely grounded
appliance, or use grounded wrist strap to remove the static
charge.
„ Avoid touching the components on motherboard or the rear
side of the board unless necessary. Hold the board on the
edge, do not try to bend or flex the board.
„ Do not leave any unfastened small parts inside the case after
installation. Loose parts will cause short circuits which may
damage the equipment.
„ Keep the computer from dangerous area, such as heat
source, humid air and water.
„ The operating temperatures of the computer should be 0 to
45 degrees Celsius.
„ To avoid injury, be careful of:
Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit
1.2
Package Checklist
;
;
;
;
Serial ATA Cable x2
Rear I/O Panel for ATX Case x1
Installation Guide x1
Fully Setup Driver DVD x1
Note: The package contents may be different due to the sales region or models in which it was sold.
For more information about the standard package in your region, please contact your dealer or sales
representative.
1
Motherboard Manual
1.3
Motherboard Specifications
Specifications
A68N-5200: A6-5200 (Quad core 2.0GHz, 25W)
CPU Support
A68N-5000: A4-5000 (Quad core 1.5GHz, 15W)
A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W)
A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W)
Supports Single Channel DDR3 800/1066/1333/1600
(*A68N-2100 is only for DDR3 800/1066/1333)
Memory
2 x DDR3 DIMM Memory Slot, Max. Supports up to 16 GB Memory
Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 module
* Please refer to www.biostar.com.tw for Memory support list.
Storage
LAN
Audio Codec
USB
Expansion Slots
2x SATA 6Gb/s Connector, Supports Native IDE, AHCI Mode
Realtek RTL 8111G
10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability
ALC662, 5.1 Channels, High Definition Audio
2x USB 3.0 port (2 on rear I/Os)
6x USB 2.0 port (2 on rear I/Os and 4 via internal headers)
1x PCIe 2.0 x16 Slot (x4)
1x PS/2 Mouse
1x PS/2 Keyboard
1x HDMI Port
Rear I/Os
1x VGA Port
1x LAN port
2x USB 2.0 Port
2x USB 3.0 Port
3x Audio Jack
2x SATA 6.0Gb/s Connector
2x USB 2.0 Header (each header supports 2 USB 2.0 ports)
1x 4-Pin Power Connector
1x 24-Pin Power Connector
1x CPU Fan Connector
1x System Fan Connector
Internal I/Os
1x Front Panel Header
1x Front Audio Header
1x Clear CMOS Header
1x Printer Port Header
1x Serial Port Header
1x S/PDIF out Connector
Form Factor
mini-ITX Form Factor, 170 mm x 170 mm
Windows XP / 7 / 8 / 8.1
OS Support
Biostar reserves the right to add or remove support for any OS with or without
notice.
2
A68N-5200/A68N-5000/A68N-3800/A68N-2100
1.4
Central Processing Unit (CPU)
The motherboard is equipped with an onboard AMD procrssor and a CPU cooler.
Model Name:
Onboard CPU:
On-board Graphics
A68N-5200
A6-5200 (Quad core 2.0GHz, 25W)
HD 8400 (DX11.1)
A68N-5000
A4-5000 (Quad core 1.5GHz, 15W)
HD 8210 (DX11.1)
A68N-3800
E2-3800 (Quad core 1.3 GHz, 15W)
HD 8280 (DX11.1)
A68N-2100
E1-2100 (Dual core 1.0 GHz, 9W)
HD 8210 (DX11.1)
1.5
Rear Panel Connectors
Note 1: Since the audio chip supports High Definition Audio Specification, the function of
each audio jack can be defined by software. The input / output function of each audio jack
listed above represents the default setting. However, when connecting external microphone
to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.
Note 2: Maximum resolution:
HDMI: 1920 x 1080 @60Hz
VGA: 1920 x 1200 @60Hz
3
Motherboard Manual
1.6 Motherboard Layout
st
Note: ■ represents the 1 pin.
4
A68N-5200/A68N-5000/A68N-3800/A68N-2100
CHAPTER 2: HARDWARE INSTALLATION
2.1
Connect Cooling Fans
These fan headers support cooling-fans built in the computer. The fan cable and
connector may be different according to the fan manufacturer. Connect the fan
cable to the connector while matching the black wire to pin#1.
CPU_FAN: CPU Fan Header
Pin
1
2
3
Assignment
Ground
+12V
FAN RPM rate sense
SYS_FAN: System Fan Header
Pin
1
2
3
Assignment
Ground
+12V
FAN RPM rate sense
Note: CPU_FAN, SYS_FAN support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.
5
Motherboard Manual
2.2
Install System Memory
A. DDR3 Modules
Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM
on the slot such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips
snap back in place and the DIMM is properly seated.
Note1: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Note2: When two double-sided DDR3 1600 DIMMs are both installed to the slots, the memory
speed will be down to DDR3 1333.
B. Memory Capacity
6
DIMM Socket Location
DDR3 Module
DDR3_A1
512MB/1GB/2GB/4GB/8GB
DDR3_A2
512MB/1GB/2GB/4GB/8GB
Total Memory Size
Max is 16GB.
A68N-5200/A68N-5000/A68N-3800/A68N-2100
2.3
Expansion Slots
PEX16_1: PCI-Express Gen2 x4 Slot
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 2GB/s per direction; 4GB/s in total.
Install an Expansion Card
You can install your expansion card by following steps:
1.
Read the related expansion card's instruction document before
install the expansion card into the computer.
2.
Remove your computer's chassis cover, screws and slot bracket
from the computer.
3.
Place a card in the expansion slot and press down on the card until it
is completely seated in the slot.
4.
Secure the card’s metal bracket to the chassis back panel with a
screw.
5.
Replace your computer's chassis cover.
6.
Power on the computer, if necessary, change BIOS settings for the
expansion card.
7.
Install related driver for the expansion card.
7
Motherboard Manual
2.4
Jumper Setting
The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is “close”, if not, that means the jumper is “open”.
Pin opened
Pin closed
Pin1-2 closed
JCMOS: Clear CMOS Header
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1
3
Pin 1-2 Close:
Normal Operation (default).
1
3
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
8
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Load Optimal Defaults and save settings in CMOS.
A68N-5200/A68N-5000/A68N-3800/A68N-2100
2.5
Headers & Connectors
ATXPWR1: ATX Power Source Connector
For better compatibility, we recommend to use a standard ATX 24-pin power
supply for this connector. Make sure to find the correct orientation before
plugging the connector.
Pin
Assignment
Pin
Assignment
13
14
15
16
17
18
19
20
21
22
23
24
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
1
2
3
4
5
6
7
8
9
10
11
12
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
ATXPWR2: ATX Power Source Connector
This connector will provide +12V to CPU power circuit.
Pin
1
2
3
4
Assignment
+12V
+12V
Ground
Ground
Note1: Before you power on the system, please make sure that both ATXPWR1 and
ATXPWR2 connectors have been plugged-in.
Note2: Insufficient power supplied to the system may result in instability or the peripherals
not functioning properly. Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices.
9
Motherboard Manual
PANEL: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
Pin
1
2
3
4
5
6
7
8
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Function
Speaker
Connector
Hard drive LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Function
N/A
N/A
Power LED
Power-on button
SATA1~SATA2: Serial ATA 6.0 Gb/s Connectors
These connectors connect to SATA hard disk drives via SATA cables and with
transfer rate upto 6 Gb/s.
Pin
1
2
3
4
5
6
7
10
Assignment
Ground
TX+
TXGround
RXRX+
Ground
A68N-5200/A68N-5000/A68N-3800/A68N-2100
F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with a wide range of simultaneously accessible
external Plug and Play peripherals.
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header supports HD and AC’97 audio front panel connector.
Pin
1
HD Audio
Assignment
Mic Left in
Pin
1
AC’97
Assignment
Mic In
2
Ground
2
3
Mic Right in
3
Ground
Mic Power
4
GPIO
4
Audio Power
5
6
Right line in
Jack Sense
5
6
RT Line Out
RT Line Out
7
Front Sense
7
Reserved
8
Key
8
Key
9
Left line in
9
LFT Line Out
10
Jack Sense
10
LFT Line Out
Note1: It is recommended that you connect a high-definition front panel audio module to
this connector to avail of the motherboard's high definition audio capability.
Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an
AC'97 front audio output cable. The function can be found via O.S. Audio Utility.
11
Motherboard Manual
JSPDIFOUT1: Digital Audio-out Connectors
The JSPDIFOUT1 is for connecting the PCI bracket SPDIF output.
Pin
Assignment
1
2
3
+5V
SPDIF_OUT
Ground
COM: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
Pin
1
2
3
4
5
6
7
8
9
10
12
Assignment
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
Key
A68N-5200/A68N-5000/A68N-3800/A68N-2100
PRINT: Printer Port Connector
This header allows you to connector printer on the PC.
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Assignment
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5
Pin
14
15
16
17
18
19
20
21
22
23
24
25
26
Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key
13
Motherboard Manual
CHAPTER 3: UEFI BIOS & SOFTWARE
3.1
z
z
3.2
UEFI BIOS Setup
The BIOS Setup program can be used to view and change the BIOS
settings for the computer. The BIOS Setup program is accessed by pressing
the <DEL> key after the Power-On Self-Test (POST) memory test begins
and before the operating system boot begins.
For further information of setting up the UEFI BIOS, please refer to the UEFI
BIOS Manual in the Setup DVD.
BIOS Update
The BIOS can be updated using either of the following utilities:
z
BIOSTAR BIOS Flasher: Using this utility, the BIOS can be updated from a
file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a
CD-ROM.
z
BIOSTAR BIOS Update Utility: It enables automated updating while in the
Windows environment. Using this utility, the BIOS can be updated from a file
on a hard disk, a USB drive (a flash drive or a USB hard drive), or a
CD-ROM, or from the file location on the Web.
BIOSTAR BIOS Flasher
BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple
way to update your BIOS via USB pen drive.
Note1: This utility only allows storage device with FAT32/16 format and single partition.
Note2: Shutting down or resetting the system while updating the BIOS will lead to system boot
failure.
Updating BIOS with BIOSTAR BIOS Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, copy and save the BIOS file into a USB flash (pen) drive.
3. Insert the USB pen drive that contains the BIOS file to the USB port.
4. Power on or reset the computer and then press <F12> during the POST process.
5. After entering the POST screen,
the BIOS-FLASHER utility pops
out. Choose [fs0] to search for the
BIOS file.
14
A68N-5200/A68N-5000/A68N-3800/A68N-2100
6. Select the proper BIOS file, and a
message asking if you are sure to
flash the BIOS file. Click Yes to
start updating BIOS.
7. A dialog pops out after BIOS flash
is completed, asking you to restart
the system. Press the [Y] key to
restart system.
8. While the system boots up and the full screen logo shows up, press <DEL> key to
enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
BIOS Update Utility (through the Internet)
1. Installing BIOS Update Utility from the DVD Driver.
2. Please make sure the system is connected to the internet before using this
function.
3. Launch BIOS Update Utility and
click the Online Update button on
the main screen.
15
Motherboard Manual
4. An open dialog will show up to
request your agreement to start the
BIOS update. Click Yes to start the
online update procedure.
5. If there is a new BIOS version, the
utility will ask you to download it.
Click Yes to proceed.
6. After the download is completed,
you will be asked to program
(update) the BIOS or not. Click Yes
to proceed.
7. After the updating process is
finished, you will be asked you to
reboot the system. Click OK to
reboot.
8. While the system boots up and the full screen logo shows up, press <DEL> key
to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
BIOS Update Utility (through a BIOS file)
1. Installing BIOS Update Utility from the DVD Driver.
2. Download the proper BIOS from http://www.biostar.com.tw/
3. Launch BIOS Update Utility and
click the Update BIOS button on
the main screen.
16
A68N-5200/A68N-5000/A68N-3800/A68N-2100
4. A warning message will show up
to request your agreement to start
the BIOS update. Click OK to start
the update procedure.
5. Choose the location for your BIOS
file in the system. Please select
the proper BIOS file, and then
click on Open. It will take several
minutes, please be patient.
6. After the BIOS Update process is
finished, click on OK to reboot the
system.
7. While the system boots up and the full screen logo shows up, press <DEL> key
to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
Backup BIOS
Click the Backup BIOS button on
the main screen for the backup of
BIOS, and select a proper location
for your backup BIOS file in the
system, and click Save.
17
Motherboard Manual
3.3
Software
Installing Software
1.
Insert the Setup DVD to the optical drive. The driver installation program would
appear if the Auto-run function has been enabled.
2.
3.
Select Software Installation, and then click on the respective software title.
Follow the on-screen instructions to complete the installation.
Launching Software
After the installation process is completed, you will see the software icon showing on
the desktop. Double-click the icon to launch it.
Note1: All the information and content about following software are subject to be changed without
notice. For better performance, the software is being continuously updated.
Note2: The information and pictures described below are for your reference only. The actual
information and settings on board may be slightly different from this manual.
BIOScreen Utility
This utility allows you to personalize your boot logo easily. You can choose BMP as
your boot logo so as to customize your computer.
Please follow the step-by-step instructions below to update boot logo:
z
Load Image:Choose the picture as the boot logo.
z
Transform:Transform the picture for BIOS and preview the result.
z
Update Bios:Write the picture to BIOS Memory to complete the update.
18
A68N-5200/A68N-5000/A68N-3800/A68N-2100
eHot-Line
eHot-Line is a convenient utility that helps you to contact with our Tech-Support system.
This utility will collect the system information which is useful for analyzing the problem you
may have encountered, and then send these information to our tech-support department
to help you fix the problem.
Note: Before you use this utility, please set Outlook Express as your default e-mail client
application program.
represents important
information that you
must provide. Without
this information, you may
not be able to send out
the mail.
*
This block will show
the information which
would be collected in
the mail.
condition
*Describe
of your system.
your area or
*Select
the area close to you.
Provide the e-mail
address that you would
like to send the copy to.
the name of
*Provide
the memory module
manufacturer.
Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.
Exit this dialog.
Save these information to a .txt file
After filling up this information, click
“Send” to send the mail out. A
warning dialog would appear asking
for your confirmation; click “Send” to
confirm or “Do Not Send” to cancel.
If you want to save this information to
a .txt file, click “Save As…” and then
you will see a saving dialog appears
asking you to enter file name.
19
Motherboard Manual
Enter the file name and then click
“Save”. Your system information will be
saved to a .txt file.
Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
Note1: We will not share customer’s data with any other third parties, so please feel free to provide
your system information while using eHot-Line service.
Note2: If you are not using Outlook Express as your default e-mail client application, you may need
to save the system information to a .txt file and send the file to our tech support with other e-mail
application. Go to the following website http://www.biostar.com.tw/app/en/about/contact.php for
getting our contact information.
20
A68N-5200/A68N-5000/A68N-3800/A68N-2100
CHAPTER 4: USEFUL HELP
4.1
Driver Installation
After you installed your operating system, please insert the Fully Setup Driver
DVD into your optical drive and install the driver for better system performance.
You will see the following window after you insert the DVD
The setup guide will auto detect your motherboard and operating system.
Note: If this window didn’t show up after you insert the Driver DVD, please use file browser
to locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will list the
compatible driver for your motherboard and operating system. Click on each
device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide will list
the software available for your system, click on each software title to launch the
installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver DVD.
Click on the Manual icon to browse for available manual.
Note: You will need Acrobat Reader to open the manual file. Please download the latest
version of Acrobat Reader software from http://get.adobe.com/reader/
21
Motherboard Manual
4.2
Extra Information
CPU Overheated
If the system shutdown automatically after power on system for seconds, that
means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown automatically to
avoid a damage of the CPU, and the system may not power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
22
A68N-5200/A68N-5000/A68N-3800/A68N-2100
4.2
AMI BIOS Beep Code
Boot Block Beep Codes
Number of Beeps
Continuing
Description
Memory sizing error or Memory module not found
POST BIOS Beep Codes
Number of Beeps
1
8
4.3
Description
Success booting.
Display memory error (system video adapter)
Troubleshooting
Probable
1.
2.
There is no power in the system. Power
LED does not shine; the fan of the
power supply does not work
Indicator light on keyboard does not
shine.
Solution
1.
2.
3.
Make sure power cable is securely
plugged in.
Replace cable.
Contact technical support.
System is inoperative. Keyboard lights are
on, power indicator lights are lit, and hard
drives are running.
Using even pressure on both ends of the
DIMM, press down firmly until the module
snaps into place.
System does not boot from a hard disk drive,
but can be booted from optical drive.
1.
2.
Check cable running from disk to disk
controller board. Make sure both ends
are securely plugged in; check the
drive type in the standard CMOS
setup.
Backing up the hard drive is
extremely important. All hard disks
are capable of breaking down at any
time.
System only boots from an optical drive.
Hard disks can be read, applications can be
used, but system fails to boot from a hard
disk.
1.
2.
Back up data and applications files.
Reformat the hard drive. Re-install
applications and data using backup
disks.
Screen message shows “Invalid
Configuration” or “CMOS Failure.”
Review system’s equipment. Make sure
correct information is in setup.
System cannot boot after user installs a
second hard drive.
1.
2.
Set master/slave jumpers correctly.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility with
other drives.
23
‫‪Motherboard Manual‬‬
‫‪APPENDIX: SPEC IN OTHER LANGUAGES‬‬
‫‪Arabic‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫)‪A68N-5200: A6-5200 (Quad core 2.0GHz, 25W‬‬
‫ﻗﺎﻋﺪة وﺣﺪة‬
‫اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫اﻟﺬاآﺮة‬
‫اﻟﺘﺨﺰﻳﻦ‬
‫ﺷﺒﻜﺔ ﻣﺤﻠﻴﺔ ‪LAN‬‬
‫اﻟﺘﺮﻣﻴﺰ اﻟﺼﻮﺗﻲ‬
‫ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم‬
‫‪USB‬‬
‫ﻓﺘﺤﺎت اﻟﺘﻮﺳﻊ‬
‫اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج‬
‫اﻟﺨﻠﻔﻴﺔ‬
‫اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج‬
‫اﻟﺪاﺧﻠﻴﺔ‬
‫ﻋﺎﻣﻞ اﻟﺸﻜﻞ‬
‫أﻧﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫اﻟﻤﺪﻋﻮﻣﺔ‬
‫)‪A68N-5000: A4-5000 (Quad core 1.5GHz, 15W‬‬
‫)‪A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W‬‬
‫)‪A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W‬‬
‫ﻗﻨﺎة واﺣﺪة وﺗﺪﻋﻢ ‪DDR3 800/1066/1333/1600‬‬
‫‪ x2‬دي‪ .‬دي‪ .‬ار‪ DDR3 .‬ﻓﺘﺤﺎت اﻟﺬاآﺮة اﻟﻤﺰدوﺟﺔ ‪ ،DIMM‬ﺗﺘﺤﻤﻞ آﺤﺪ أﻗﺼﻰ ‪ 16‬ﺟﻴﺠﺎﺑﺎﻳﺖ ذاآﺮة‬
‫آﻞ ﻓﺘﺤﺔ ﻣﺰدوﺟﺔ ‪ DIMM‬ﺗﺘﺤﻤﻞ دون ‪ 512 ECC‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ ‪ 8/4/2/1/‬ﺟﻴﺠﺎﺑﺎﻳﺖ دي‪ .‬دي‪ .‬ار ‪DDR3‬‬
‫* ﻳﺮﺟﻰ اﻟﺮﺟﻮع إﻟﻰ اﻟﻤﻮﻗﻊ ‪ www.biostar.com.tw‬ﻟﻘﺎﺋﻤﺔ دﻋﻢ اﻟﺬاآﺮة‪.‬‬
‫وﺻﻠﺔ ‪ x2‬ﺳﺎﺗﺎ ‪ SATA 6‬ﺟﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬اﻟﺜﺎﻧﻴﺔ‬
‫ﺗﺘﺤﻤﻞ راﻳﺪ اﻷم ‪AHCI / IDE‬‬
‫رﻳﻴﺎﻟﺘﻴﻚ رت ل ‪REALTEK RTL 8111G‬‬
‫‪ 1000 / 100 / 10‬ﻣﻴﺠﺎﺑﺎﻳﺖ ‪ /‬اﻟﺜﺎﻧﻴﺔ ‪ ،‬ﺗﺤﺪﻳﺪ ﺗﻠﻘﺎﺋﻲ ‪ ،‬اﻟﻨﺼﻒ ‪ /‬اﻟﻘﺪرة اﻟﻘﺼﻮى اﻟﻤﺰدوﺟﺔ‬
‫‪ALC662‬‬
‫‪ 5.1‬ﻗﻨﻮات ﻋﺎﻟﻴﺔ اﻟﺪﻗﺔ‬
‫ﻣﻨﺎﻓﺬ ‪ x 2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ 2 ) 3.0 USB‬ﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ(‬
‫ﻣﻨﺎﻓﺬ ‪ x 6‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ 2 ) 2.0 USB‬ﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و ‪ 4‬ﻣﻦ ﺧﻼل اﻟﻤﻮزع‬
‫اﻟﺪاﺧﻠﻲ (‬
‫‪ x 1‬ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ ‪(4x)16 x 2.0 PCIe‬‬
‫‪ PS/2 x 1‬اﻟﻔﺎرة‬
‫‪ PS/2 x 1‬ﻟﻮﺣﺔ اﻟﻤﻔﺎﺗﻴﺢ ﻟﻠﻜﻤﺒﻴﻮﺗﺮ‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ HDMI x 1‬وﺳﻴﻂ ﻣﺘﻌﺪد اﻟﻌﺎﻟﻲ اﻟﻮﺿﻮح‬
‫ﻣﻨﻈﻮﻣﺔ اﻟﻌﺮض اﻟﻤﺮﺋﻲ ‪VGA‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪x 1‬‬
‫اﻟﺸﺒﻜﺔ اﻟﻤﺤﻠﻴﺔ ‪LAN‬‬
‫ﻓﺘﺤﺔ ﻟﺘﻮﺻﻴﻞ ﻋﺪد ‪x 1‬‬
‫ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪2.0 USB‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪x 2‬‬
‫ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪3.0 USB‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪x 2‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 3‬ﺟﺎك ﻟﻠﺼﻮت‬
‫وﺻﻠﺔ ‪ 6 SATA x 2‬ﺟﻴﺠﺎﺑﺎﻳﺖ ‪ /‬اﻟﺜﺎﻧﻴﺔ‬
‫ﻣﻮزع ‪ x 2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ ) 2.0 USB‬آﻞ ﻣﻮزع ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪( 2.0 USB‬‬
‫وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 4 x 1‬دﺑﺎﺑﻴﺲ‬
‫وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 24 x 1‬دﺑﻮس‬
‫وﺻﻠﺔ ‪ x 1‬ﻣﺮوﺣﺔ ﺗﺒﺮﻳﺪ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫وﺻﻠﺔ ‪ x 1‬ﻣﺮاوح ﺗﺒﺮﻳﺪ اﻟﻤﻨﻈﻮﻣﺔ‬
‫ﻣﻮزع ‪ x 1‬اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻣﻮزع ‪ x 1‬اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻣﻮزع ‪ x 1‬ﺳﻴﻤﻮس ﻣﺒﺎﺷﺮ‬
‫ﻣﻮزع ‪ x 1‬ﻓﺘﺤﺔ ﻟﻠﻄﺎﺑﻌﺔ‬
‫ﻣﻮزع ‪ x 1‬ﻓﺘﺤﺔ ﺗﺴﻠﺴﻠﻴﺔ‬
‫وﺻﻠﺔ ‪ x 1‬ﺧﺎرﺟﻴﺔ ‪ S/PDIF‬ﺳﻮﻧﻲ ﻓﻴﻠﻴﺒﺲ اﻟﻮاﺟﻬﺔ اﻟﺮﻗﻤﻴﺔ‬
‫ﻋﺎﻣﻞ ﺷﻜﻞ ﻣﺪد اﻟﺘﻜﻨﻮﻟﻮﺟﻴﺎ اﻟﻤﺘﻘﺪﻣﺔ ‪ 170 ، mini-ITX‬ﻣﻢ ‪ 170 x‬ﻣﻢ‬
‫وﻳﻨﺪوز إآﺲ ﺑﻲ ‪ / windows xp‬وﻳﻨﺪوز ‪8.1 / 8 / 7‬‬
‫ﺑﻴﻮﺳﺘﺎر ‪ BIOSTAR‬ﺗﺤﺘﻔﻆ ﺑﺤﻖ إﺿﺎﻓﺔ أو أزﻟﺔ اﻟﺪﻋﻢ ﻷي ﻧﻈﺎم ﺗﺸﻐﻴﻞ ﻣﻊ أو ﺑﺪون أﻧﻈﺎر‪.‬‬
‫‪24‬‬
A68N-5200/A68N-5000/A68N-3800/A68N-2100
French
Spécifications
A68N-5200: A6-5200 (Quad core 2.0GHz, 25W)
Support Unité
Centrale
Mémoire
Stockage
Réseau local
Codec audio
USB
Connecteur
d’extension
I/O arrirèes
I/O en interne
A68N-5000: A4-5000 (Quad core 1.5GHz, 15W)
A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W)
A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W)
Supporte mémoire DDR3 single canal 800/1066/1333/1600
Banc de mémoire 2 x DDR3 DIMM, Supporte max. jusqu’à une mémoire de 16
GB
Chaque module DIMM supporte module DDR3 non-ECC 512MB/ 1/ 2/ 4/ 8 GB
* Veuillez vous reporter à www.biostar.com.tw pour la liste des soutien de la
mémoire.
Connecteur 2 x SATA 6Gb/s, Supporte système indigène IDE & AHCI mode
Realtek RTL 8111G
10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat /
bidirectionnelle simultanée
ALC662, Canaux 5.1, écoute audio de haute définition
Port 2x USB 3.0 (2 sur les I/O arrières)
Port 6x USB 2.0 (2 sur les I/O arrières et 4 en interne)
1x PCIe 2.0 x16 Fente (x4)
1x PS/2 Clavier
1x PS/2 Souris
1x Port HDMI
1x Port VGA
1x port LAN
2x Port USB 2.0
2x Port USB 3.0
3x entrées audio
2x Connecteur SATA 6.0Gb/s
2x embases USB 2.0 (chaque embase supporte 2 Ports USB 2.0)
1x 4-Broche de carte
1x 24-Broche de carte
1x Connecteur ventilateur unité centrale
1x Connecteur ventilateur système
1x Fiche panneau avant
1x Fiche audio avant
1x Fiche mémoire CMOS vide
1x Embase port imprimante
1x Embase port série
1x Connecteur sortie S/PDIF
Facteur
d'encombrement
Facteur d'encombrement mini-ITX, 170 mm x 170 mm
Support SE
Windows XP / 7 / 8 / 8.1
Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec
ou sans préavis.
25
Motherboard Manual
German
Spezifikationen
A68N-5200: A6-5200 (Quad core 2.0GHz, 25W)
CPU-Unterstützun A68N-5000: A4-5000 (Quad core 1.5GHz, 15W)
g
A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W)
A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W)
Festplattenspeich
er
Unterstützt single-channel DDR3 800/1066/1333/1600
2 x DDR3 DIMM-SpeicherSlot, Max. Uterstützung bis zu 16 GB-Speicher
Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3-Module
* Bitte konsultieren Sie www.biostar.com.tw für für Speicherunterstützung
Liste.
Arbeitsspeicher
2x SATA 6Gb-Verbindung, Unterstützt Ureinwohner IDE & AHCI Modus
LAN
Realtek RTL 8111G
10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig
Audio-Codec
ALC662, 5.1 Kanäle, HD-Audio
USB
2x USB 3.0-Port (2 hintere I/Os)
6x USB 2.0-Port (2 hintere I/Os und 4 via interne Header)
Erweiterungsansc
hlüsse
1x PCIe 2.0 x16-Slot (x4)
Hintere I/Os
1x PS/2-Maus
1x PS/2-Keyboard
1x HDMI-Port
1x VGA-Port
1x LAN-Port
2x USB 2.0-Port
2x USB 3.0-Port
3x Audio Jack
Interne I/Os
Formfaktor
2x SATA 6.0Gb/s-Verbinung
2x USB 2.0-Header (jeder Header unterstützt 2 USB 2.0-Ports)
1x 4-Pin-Stromverbindung
1x 24-Pin-Stromverbindung
1x CPU-Ventilatorverbindung
1x System-Ventilatorverbindung
1x Header für Frontpanel
1x Header für Frontaudio
1x Header für klares CMOS
1x Header für Druckerport
1x Serieller Port-Header
1x S/PDI-Auswurfsverbindung
mini-ITX Formfaktor, 170 mm x 170 mm
Windows XP / 7 / 8 / 8.1
OS-Unterstützung Biostar reserves the right to add or remove support for any OS with or without
notice.
26
A68N-5200/A68N-5000/A68N-3800/A68N-2100
Italian
Specificazioni
Supporto
processore
Memoria
Memorizzazione
Catena
Codec Audio
USB
Slot di
espansione
A68N-5200: A6-5200 (Quad core 2.0GHz, 25W)
A68N-5000: A4-5000 (Quad core 1.5GHz, 15W)
A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W)
A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W)
Supporta DDR3 800/1066/1333/1600 Singolo Canale
2 x DDR3 DIMM Slot di Memoria Supporta fino a 16 GB Memoria
Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 moduli
* Si prega di consultare www.biostar.com.tw per la lista di supporto del
memoria.
Connettore 2x SATA 6Gb/s
Supporta nativo IDE & AHCI modo
Realtek RTL 8111G
10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo
ALC662
Canali Audio di Alta Definizione 5.1
Slot 2x USB 3.0 (2 nei ingressi/ uscite posteriore)
Slot 6x USB 2.0 (2 nei ingressi/ uscite posteriore e 4 da distributori interni)
Slot 1x PCIe 2.0 x16 (x4)
Mouse 1x PS/2
Tastiera 1x PS/2
Slot 1x HDMI
Slot 1x VGA
Ingressi/ Uscite
Slot 1x LAN
Posteriore
Slot 2x USB 2.0
Slot 2x USB 3.0
Jack audio 3x
Connettore 2x SATA 6.0Gb/s
Distributore 2x USB 2.0(ogni distributore supporta 2 slot USB 2.0)
Connettore con 4 pin x1
Connettore con 24 pin x1
Connettore Ventilatore processore x1
Ingressi/ Uscite
Connettore Ventilatore Sistema x1
Interni
Distributore Pannello Frontale x1
Distributore Audio Frontale x1
Distributore CMOS Diretto x1
Distributore Slot Stampante x1
Distributore Slot Serie x1
Connettore esterno S/PDIF x1
Fattore di Forma Fattore di Forma mini-ITX, 170 mm x 170 mm
Windows XP / 7 / 8 / 8.1
Supporto SO
Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi SO
con o senza preavviso.
27
Motherboard Manual
Japanese
仕様
A68N-5200: A6-5200 (Quad core 2.0GHz, 25W)
CPU サポート
メモリ
A68N-5000: A4-5000 (Quad core 1.5GHz, 15W)
A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W)
A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W)
シングルチャンネル DDR3 800/1066/1333/1600 をサポート
2 x DDR3 DIMM メモリ スロット、 最大 16GB メモリまでサポート
各 DIMM は、 非-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 モジュールをサポートしてい
ます
*サポートされているメモリのリストについては、www.biostar.com.twを参照してく
ださい。
保存スペース
2x SATA 6Gb/s コネクタ, ネイティブ IDE & AHCI モード のサポート
LAN
Realtek RTL 8111G
10/ 100/ 1000 Mb/s オートネゴーシエーション、半/全 二重通信
オーディオ コー
デック
ALC662
5.1 チャンネル, ハイ デフィニション オーディオ
USB
2x USB 3.0 ポート (後部 I/O に2つ)
6x USB 2.0 ポート (後部 I/O に2つ 及び 内蔵ヘッダー経由に4つ)
拡張スロット
1x PCIe 2.0 x16 スロット (x4)
後部 I/O
1x PS/2 キーボード
1x PS/2 マウス
1x HDMI ポート
1x VGA ポート
1x LAN ポート
2x USB 2.0 ポート
2x USB 3.0 ポート
3x オーディオ ジャック
内蔵 I/O
2x SATA 6.0Gb/s コネクタ
2x USB 2.0 ヘッダー (各ヘッダーは、2つの USB 2.0 ポートをサポートしていま
す)
1x 4-Pin パワー コネクタ
1x 24-Pin パワー コネクタ
1x CPU ファン コネクタ
1x システム ファン コネクタ
1x フロント パネル ヘッダー
1x フロント オーディオ ヘッダー
1x クリア CMOS ヘッダー
1x プリンター ポート ヘッダー
1x シリアル ポート ヘッダー
1x S/PDIF アウト コネクタ
フォーム ファク
タ
mini-ITX フォーム ファクタ、170 mm x 170 mm
サポート OS
Windows XP / 7 / 8 / 8.1
Biostar には、通知なしでサポート OS を変更する権限があります。
28
A68N-5200/A68N-5000/A68N-3800/A68N-2100
Polish
Specyfikacje techniczne
Obsługa
procesora
Pamięć
Przechowywanie
LAN
Codec Audio
USB
Złącza
rozszerzeń
A68N-5200: A6-5200 (Quad core 2.0GHz, 25W)
A68N-5000: A4-5000 (Quad core 1.5GHz, 15W)
A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W)
A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W)
Pojedynczy pamięci DDR3 800/1066/1333/1600 Dwukanałowa
2 x DDR3 DIMM Pamięć Gniazda procesora (Slot), Maksymalna wielkość
pamięci 16 GB
Każdy DIMM obsługuje jeden moduł non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3
* Proszę sprawdzić listę obsługiwanych pamięć na stronie internetowej
www.biostar.com.tw
Złącze 2x SATA 6Gb/s, Obsługa rodzimy IDE & AHCI tryb
Układ RTL 8111G
10/ 100/ 1000 Mb auto negocjacja, pojemność dupleks Połowe / Pełny
ALC662
Kanały Audio wysokiej Definicji 5.1
2 x złącza USB 3.0 (2 przez tylne porty wejścia/ wyjścia oraz)
6 x złącza USB 2.0 (2 przez tylne porty wejścia/ wyjścia oraz 4 przez
wewnętrzne porty)
złącza 1x PCIe 2.0 x16 (x4 Slot)
Myszka 1x PS/2
Klawiatura 1x PS/2
Port 1x HDMI (gniazdo)
Tylne porty
Port 1x VGA
wejścia/ wyjścia
Port 1x LAN
Porty 2x USB 2.0
Porty 2x USB 3.0
Porty audio 3x
Złącza 2x SATA 6.0Gb/s
Złącza 2x USB 2.0 (każde złącze obsługuje dodatkowe 2 porty USB 2.0)
Złącza 4 pionowe x 1
Złącza 24 pionowe x 1
Złącze wentylatora CPU x 1
Złącze wentylatora obudowy x 1
Wewnętrzne porty
Złącze przedniego panelu x1
wejścia/ wyjścia
Złącze audio przedniego panelu x1
Złącze bezpośrednie CMOS x1
Złącze port drukarki x1
Port szeregowy x1
Port zewnętrzny S/PDIF x1
Obudowa
Obudowa mini-ITX, 170 mm x 170 mm
Windows XP / 7 / 8 / 8.1
Obsługa OS
Biostar zastrzega sobie prawo do dodania lub wycofania obsługi dla OS, z
wypowiedzeniem lub bez wypowiedzenia.
29
Motherboard Manual
Portuguese
Especificações
Suporte
Processador
Memória
Armazenamento
LAN
Codec de Audio
USB
Slots de
expansão
A68N-5200: A6-5200 (Quad core 2.0GHz, 25W)
A68N-5000: A4-5000 (Quad core 1.5GHz, 15W)
A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W)
A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W)
Suporta DDR3 800/1066/1333/1600 Canal único
2 x DDR3 DIMM Slot de memória Suporta até 16 GB Memória
Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 módulo
* Por favor consulte www.biostar.com.tw para obter uma lista de suporte do
memória.
Conector 2x SATA 6Gb/s, Suporta nativo IDE & AHCI modo
Realtek RTL 8111G
10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio
ALC662
Canais de Áudio de Alta Definição 5.1
Porta 2x USB 3.0 (2 nas entradas/saídas traseiras)
Porta 6x USB 2.0 (2 nas entradas/saídas traseiras e 4 pelos Dispositivos
internos)
Porta 1x PCIe 2.0 x16 (x4)
Mouse 1x PS/2
Teclado 1x PS/2
Porta 1x HDMI
Entradas/Saídas
Porta 1x VGA
no painel
Porta 1x LAN
traseiro
Porta 2x USB 2.0
Porta 2x USB 3.0
Soquete audio 3x
Conector 2x SATA 6.0Gb/s
Dispositivo 2x USB 2.0 (cada Dispositivo suporta 2 portas USB 2.0)
Conector de 4 pinos x1
Conector de 24 pinos x1
Conector de Ventoinha processador x1
Conectores na
Conector de Ventoinha Sistema x1
placa
Dispositivo Painel Frontal x1
Dispositivo de Audio Frontal x1
Dispositivo CMOS Direct x1
Dispositivo Porta Impressora x1
Dispositivo Porta Série x1
Conector Externo S/PDIF x1
Fator de Fôrma Fator de Fôrma mini-ITX, 170 mm x 170 mm
Windows XP / 7 / 8 / 8.1
Suporte OS
Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS
com ou sem notificação.
30
A68N-5200/A68N-5000/A68N-3800/A68N-2100
Russian
Спецификации
Поддержка
центрального
процессора
Память
Накопитель
Локальная сеть
Аудиокодек
USB
Гнезда расшир.
Задняя плата
ввода-вывода
Внутр. Плата
ввода-вывода
Конструктив
Поддержка ОС
A68N-5200: A6-5200 (Quad core 2.0GHz, 25W)
A68N-5000: A4-5000 (Quad core 1.5GHz, 15W)
A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W)
A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W)
Поддерживает Одноканальный DDR3 800/1066/1333/1600
2 гнезда платы памяти DDR3 DIMM, максимальная память до 16 Гб
Каждый модуль DIMM поддерживает модуль не-ECC 512 Мб/ 1/ 2/ 4/ 8 Гб
DDR3
* Перечень поддержки памяти смотрите на www.biostar.com.tw.
Соединитель 2x SATA 6 Гб/с, Поддерживает родной IDE & AHCI режим
Realtek RTL 8111G
Автосогласование 10/ 100/ 1000 Мб/с, работает в полно/полудуплексном
режиме
ALC662
Каналы 5.1, высококачественное аудио
2 порта USB 3.0 (2 сзади ввода-вывода)
6 порта USB 2.0 (2 сзади ввода-вывода и 4 через внутренние контакты)
1x PCIe 2.0 x16 гнездо (x4)
1 мышь PS/2
1 клавиатура PS/2
1 порт HDMI
1 порт VGA
1 порт локальной сети
2 порта USB 2.0
2 порта USB 3.0
3 гнезд для подключения наушников
Соединитель 2x SATA 6 Гб/с
2 контакта USB 2.0 (каждый контакт поддерживает 2 порта USB 2.0)
1 4-выводный разъем питания
1 24-выводный разъем питания
1 разъем вентилятора ЦП
1 разъема вентилятора системы
1 контакт передней панели
1 контакт передней аудиопанели
1 контакт микросхемы Clear CMOS
1 контакт порта принтера
1 контакт последовательного порта
1 соединитель S/PDIF-Out
Форм-фактор mini-ITX, 170 мм x 170 мм
Windows XP / 7 / 8 / 8.1
Biostar оставляет за собой право добавлять или удалять поддержку
любой ОС, с уведомлением или без.
31
Motherboard Manual
Spanish
Especificaciones
Compatibilidad
con el procesador
Memoria
Almacenamiento
de información
LAN
Códec Audio
USB
Ranuras de
Extinción
Panel trasero de
E/S
Conectores en
placa
Factor de Forma
Soporte OS
A68N-5200: A6-5200 (Quad core 2.0GHz, 25W)
A68N-5000: A4-5000 (Quad core 1.5GHz, 15W)
A68N-3800: E2-3800 (Quad core 1.3 GHz, 15W)
A68N-2100: E1-2100 (Dual core 1.0 GHz, 9W)
Soporta DDR3 800/1066/1333/1600 monocanal
2x DDR3 DIMM Ranura de memoria Soporta hasta 16 GB Memoria
Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3
*Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el
memoria.
Conector 2x SATA 6Gb/s, Soporta nativo IDE & AHCI modo
Realtek RTL 8111G
10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo
ALC662, Canales Audio de Alta Definición 5.1
Ranura 2x USB 3.0 (2 en las entrada/salidas posteriores)
Ranura 6x USB 2.0 (2 en las entradas/salidas posteriores y 4 por los distribuidores
internos)
Ranura 1x PCIe 2.0 x16 (x4)
Ratón 1x PS/2
Teclado 1x PS/2
Ranura 1x HDMI
Ranura 1x VGA
Ranura 1x LAN
Ranura 2x USB 2.0
Ranura 2x USB 3.0
Socket audio 3x
Conector 2x SATA 6Gb’s
Distribuidor 2x USB 2.0 (cada distribuidor soporta 2 ranuras USB 2.0)
Conector con 4 patillas x1
Conector con 24 patillas x1
Conector Ventilador procesador x1
Conector Ventilador Sistema x1
Distribuidor Panel Frontal x1
Distribuidor Audio Frontal x1
Distribuidor CMOS Directo x1
Distribuidor Ranura Impresora x1
Distribuidor Ranura Serie x1
Conector Externo S/PDIF x1
Factor de Forma mini-ITX, 170 mm x 170 mm
Windows XP / 7 / 8 / 8.1
Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin
notificación.
2014/01/16
32