PROCENTEC B1 Repeater user manual April 2017

Repeater B1
Installation manual
Content
1.
Introduction ................................................................................................... 3
2.
Installation instructions ................................................................................. 4
3.
Power supply ................................................................................................. 5
4.
PROFIBUS ....................................................................................................... 5
5.
Other PROCENTEC products .......................................................................... 9
6.
Sales offices and distributors ....................................................................... 11
7.
About PROCENTEC ....................................................................................... 16
B1 Repeater user manual | April 2017 | ©PROCENTEC
2/17
1.
Introduction
The compact PROFIBUS DP Repeater B1 offers an economic alternative and tackles the technological
limitations of the existing repeaters. This first-class network component fulfils the electrical, mechanical and
diagnostic requirements of the demanding modern industry.
The advanced 12 Mbps core of the B1 is identical to the ProfiHub; it can be cascaded unlimitedly and is
equipped with the latest isolated RS 485 interface. The data is constantly monitored for glitches which are
digitally filtered out. Every channel has on-board switchable termination and can drive 31 devices.
The removable screw terminals of the PROFIBUS interface are pinned-out in a way that reversal mounting does
not impact existing wiring. A DB9 connector is provided for ProfiTrace or other maintenance/engineering tools.
The power supply is redundant which makes it suitable for applications in which high availability is required
and consumes relatively low power which helps the environment.
B1 Repeater user manual | April 2017 | ©PROCENTEC
3/17
2.
Installation instructions
Location
The B1 can be installed everywhere in a non-hazardous area that complies with IP 20 (DIN 40 050) and the
specified temperature range of -20 to +60 o Celsius.
Position
The B1 can be installed in every position, but it is recommended to install it with Channel 2 pointing down. In
this position it is easier to read the status display and to perform measurements on the DB9 connector.
Mounting and dismounting
The B1 has to be mounted on a 35 mm DIN-rail with a minimum width of 60 mm. Fig. 1 and Fig. 2 illustrate how
to mount and dismount the B1 on and from the DIN-rail.
Fig. 1 Mounting; pull-down and push
B1 Repeater user manual | April 2017 | ©PROCENTEC
Fig. 2 Dismounting; Push-up and pull
4/17
3.
Power supply
Parameters
The power supply has to comply with
the following specifications:
Voltage: 19 to 28 Vdc
Current: Min. 65 mA
Wiring
The leads of both power connectors have
to be wired as follows:
“+” = Positive Voltage
“-“ = 0 V
SH = Earth
Redundancy
Both power connectors are linked 1-on-1 to the internal power supply of the B1. If 1 power supply would fail,
the other takes over without delay time. When redundancy is not required, it is sufficient to use 1 power
connector. When the B1 is flipped 180 o, the connectors can be used without alteration. Fig. 3 illustrates the
location of the power supply connectors.
4.
PROFIBUS
Connectors
Each channel has 2 connectors (IN and
OUT). They are both linked 1-on-1 when
the termination is OFF.
When a channel of the repeater is NOT
the last device on the segment, it doesn’t
matter which connector is utilized.
When the termination is ON the OUT
connector is NOT connected.
When the B1 is flipped 180 o, the wired
connectors can be used without
alteration.
Pin layout
Pin “A1/2”: Green wire
Pin “B1/2”: Red wire
Pin “SH”: Cable shielding
Termination
Fig. 3 Structurs of the B1
B1 Repeater user manual | April 2017 | ©PROCENTEC
5/17
Each channel has its own termination which can be switched ON/OFF.
Piggy back connector
The piggy back connector is 1-on-1 with channel 2.
Ground Clip
It is recommended to use the supplied GC-01
ground clip to attach the cable shield to the screw
connector, as shown in fig. 4, for easier shield
connection and better strain relief.
The Ground Clip GC-01 can be ordered separately
per 25pcs with order code: 101-00201B.
Fig. 4 Using the Ground Clip
Diagnose-LEDs
POWER
RX
ERR
OFF
Blinking
ON
 Power is OFF or an
 Power supply not stable or an
☺ Power supply OK.
internal failure.
internal failure.
 No communication
☺ 1 or more devices
☺ 1 or more devices communicating
detected (this Channel).
communicating (this Channel).
(this Channel).
☺ No problem has been
 Communication problem (this
 Communication problem (this
detected.
Channel).
Channel).
Technical Data Compact PROFIBUS DP Repeater B1
Dimensions and weight
Dimensions L x W x H (mm)
Weight
106 x 55 x 33 mm (without plugs)
106 x 55 x 55 mm (with plugs)
Approximately 125 g
B1 Repeater user manual | April 2017 | ©PROCENTEC
6/17
Ambient conditions
Operating temperature
Isolation class
-20 to +60o Celsius
IP 20 (DIN 40 050)
Protocol specifications
Supported Protocols
DP-V0, DP- V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrive
and any other FDL based protocol.
Transmission speed
Transmission speed detection
Transmission speed detection time
9,6 kbps to 12 Mbps (including 45,45 kbps)
Auto detect
< 10 s
Data delay time
1,5 TBit at 9,6 kbps to 3 Mbps
2,5 TBit at 6 Mbps
3,5 TBit at 12 Mbps
Delay time jitter
Max. ¼ bit time
PROFIBUS cable specifications
Cable lengths
1200 m at 9,6 kbps to 93,75 kbps
1000 m at 187,5 kbps
400 m at 500 kbps
200 m at 1,5 Mbps
100 m at 3 Mbps to 12 Mbps
Wire diameter
Wire type
< 2,5 mm2
Stranded or Solid core
Number of devices
Max. 31 per channel (including ProfiHubs, OLMs, PCs, etc.)
Termination
Integrated and switchable.
Powered according to IEC 61158 (390/220/390 Ohms)
Cascading depth
No limits
Power supply specifications
Nominal supply voltage
Current consumption
Power dissipation
19 to 28 Vdc
65 mA at 24 Vdc
Max. 2 W
Redundancy
Yes (Power 1 OR Power 2)
B1 Repeater user manual | April 2017 | ©PROCENTEC
7/17
Power LED
Reverse polarity protection
Power 1 OR Power 2
Yes
Wire diameter
< 2,5 mm2
B1 Repeater user manual | April 2017 | ©PROCENTEC
8/17
5.
Other PROCENTEC products
PROFINET Cable Tester
•
•
•
•
•
•
•
•
•
Suitable for 4- and 8-wire PROFINET and regular Ethernet cables
Suitable for straight and 90°, metal or plastic PROFINET plugs
Tests cable shielding
Detects short circuits, wire breaks, swaps, miswiring and split pairs
Large LCD clearly indicates the test results
150 hours on one 9 V battery
Operating temperature: 0 to 50 °C
Just 1-key-press to start continuous testing
It can also test telephone and coax cable
www.profinetcabletester.com
Compact PROFIBUS Repeater
•
•
•
•
•
•
•
•
•
•
•
•
Single channel PROFIBUS repeater
Transparent
Increased signal strength
12 Mbps
Auto baudrate detection
Redundant power supply
Digital glitch filtering
No limit in cascading
Integrated switchable termination
Diagnostic LEDs
DB9 connector for measurements
IP 20 with DIN-rail mounting
www.procentec.com/profihub/b1/en
B1 Repeater user manual | April 2017 | ©PROCENTEC
9/17
ProfiHub B5+R
•
•
•
•
•
•
•
•
•
6 galvanicly isolated channels
Configurable grounding system
Redundant power supply
Bus redundancy option
Star, tree and bus structured networks
Alarm contact
Monitoring port per channel
IP20
Certifications: UL Listed, DNV, FCC, CE
www.procentec.com/products/profihub
ProfiHub A5
•
•
•
•
•
•
•
•
•
5 Isolated channels
Transparent
Increased signal strength
31 devices per channel
12 Mbps
1200 m spur line length
No address required
Integrated switchable termination
IP 65 classification
www.procentec.com/profihub
The productname (for example ProfiHub A5) has its own style: 1B Productname. The properties of this style are
the same as those of the style ‘1 Paragraph’ with the distinction that the productname will not appear in the
content.
B1 Repeater user manual | April 2017 | ©PROCENTEC
10/17
6.
Sales offices and distributors
HEADQUARTERS
PROCENTEC
Klopperman 16
2292 JD WATERINGEN
Netherlands
T:
F:
E:
W:
+31 (0)174 671 800
+31 (0)174 671 801
info@procentec.com
www.procentec.com
T:
F:
E:
W:
+54 237 46 31 151
+54 237 46 31 150
santiago.falcomer@efalcom.com
www.efalcom.com
T:
F:
E:
W:
+43 2236 315 25-25
+43 2236 315 25-60
office@reliste.at
www.relise.at
IS Systems Pty Limited
14 Laverick Ave.,
Tomago
NSW, Australia, 2322
T:
F:
E:
W:
+61 2 4964 8548
+61 2 4964 8877
fritz.woller@issystems.com.au
www.issystems.com.au
Pentair Flow Control Pacific
1 Percival Road
Smithfield
NSW, Australia, 2164
T:
F:
E:
W:
+61 2 4448 0466
+61 2 4423 3232
sharee.hazell@pentair.com.au
www.profibuscentre.com.au
T:
F:
E:
W:
+32 2 720 49 16
+32 2 720 37 50
bloemen@bintz.be
www.bintz.be
T:
F:
E:
W:
+55 11 5561-7488
+55 11 5093-2592
paolo@wii.com.br
www.wii.com.br
T:
F:
E:
W:
+1 403 225 1986
+1 587 585 2828
admin@streamlinepm.com
www.streamlinepm.com
T:
F:
E:
W:
+56 41 246 93 50
+56 41 252 25 92
rodrigopinto@rpingenieria.cl
www.rpingenieria.cl
T:
F:
E:
W:
+86 (10)847 669 11 / +86 (10) 847 873 11
+86 (10)847 667 22
info@procentec.net
www.procentec.net
T:
F:
E:
W:
+420 484 845 555
+420 484 845 556
foxon@foxon.cz
www.foxon.cz
ARGENTINA
eFALCOM
Alcorta 2411
B1744 - Moreno
Buenos Aires
Argentina
AUSTRIA
RELISTE
Enzersdorfer Straße 8-10
A-2345 Brunn am Gebirge
Austria
AUSTRALIA
BELGIUM and LUXEMBOURG
Bintz Technics N.V.
Brixtonlaan 23
B-1930 Zaventem
Belgium
BRAZIL
Westcon Instrument. Indl Ltda
Rual Alvaro Rodrigues, 257
São Paulo – SP
Brazil - CEP 04582-000
CANADA
Streamline Process Management Inc.
#3, 4351 – 104 Ave SE
Calgary, Alberta T2C 5C6
Canada
CHILE
RP Ingenieria Limitada
Tucapel 92 oficina 52
Concepción
Chile
CHINA
PROCENTEC Beijing
Room E-1115 WangJingYuan YouLeHui
ChaoYang
Beijing
China
CZECH REPUBLIC
FOXON s.r.o.
Polní 367
460 01 Liberec 12
Czech Republic
B1 Repeater user manual | April 2017 | ©PROCENTEC
11/17
DENMARK
ProSaiCon
Jernbanegade 23B
DK 4000 Roskilde
Denmark
T:
F:
E:
W:
+45 70 20 52 01
+45 70 20 52 02
hfj@prosaicon.dk
www.prosaicon.dk
T:
F:
E:
W:
+2 02 2524 2842
+2 02 2524 2843
aya.elshafei@masautomation.com
www.masautomation.com
T:
F:
E:
W:
+372 605 2526
+372 605 2524
info@saksa-automaatika.ee
www.saksa-automaatika.ee
EGYPT
Mas Trading
37, 105 Street
Al-Etihad Square
Egypt
ESTONIA
Saksa Automaatika OU
Peterburi Tee 49
Tailinn
EE-11415 Estonia
FINLAND
Hantekno Oy
Kalliotie 2
04360 Tuusula
Finland
T: +358 40 8222 014
E: info@hantekno.com
W: www.hantekno.fi
FRANCE
AGILiCOM
Bâtiment B
1, rue de la Briaudière
Z.A. La Châtaigneraie
37510 BALLAN-MIRE
France
T:
F:
E:
W:
+33 247 76 10 20
+33 247 37 95 54
jy.bois@agilicom.fr
www.agilicom.fr
T:
F:
E:
W:
+49 721 831 663-0
+49 721 831 663-29
info@procentec.de
www.procentec.de
UL Engineering Services & Software Pvt Ltd
Nirman Classic,
Katraj-Kondhwa Road,
Katraj, Pune-411046
India
T:
F:
E:
W:
+91 202 696 0050
+91 202 696 2079
dileep.miskin@ulepl.com
www.ulepl.com
Automation Combine
B.R. House 4th Floor,
Hennur Main Road
Bangalore 560043
India
T:
F:
E:
W:
+98 452 84 550 / +98 452 030 47
+93 421 375 34 / +93 425 002 90
info@automationcombine.com
www.automationcombine.in
T:
F:
E:
W:
+353 61 202 107 or +353 61 240 240
+353 61 202 582
info@profibus.ie
www.profibus.ie
T:
F:
E:
W:
+972 9 835 70 90
+972 9 835 06 19
info@instrumetrics-ic.co.il
www.inst-ic.co.il
T:
F:
E:
W:
+39 030 200 8610
+39 030 238 0059
www.procentec.it
www.procentec.it
GERMANY
PROCENTEC GmbH
Benzstrasse 15
D-76185 Karlsruhe
Germany
INDIA
IRELAND
PROFIBUS Ireland
Automation Research Centre
University of Limerick
National Technology Park, Plassey
Limerick
Ireland
ISRAEL
Instrumetrics Industrial Control
8 Hamlacha St.
New Industrial Zone
Netanya, 42170
Israel
ITALY
PROCENTEC Italy
Via Branze n. 43/45
25123 Brescia
Italy
B1 Repeater user manual | April 2017 | ©PROCENTEC
12/17
JAPAN
TJ Group
C/O Japanese PROFIBUS Organisation
West World Building 4F
3-1-6 Higashi-Gotanda,
Shinagawa-ku,
Tokyo, 141-0022
Japan
T:
F:
E:
+81 3 6450 3739
+81 3 6450 3739
info@profibus.jp
T:
F:
E:
W:
+82 82 31 216 2640
+82 82 31 216 2644
chays@hiprotech.co.kr
www.profibus.co.kr
T:
F:
E:
W:
+961 1 491161
+961 1 491162
sales@iteclb.com
www.iteclb.com
KOREA
Hi-PRO Tech. Co., Ltd.
#2802, U-Tower, 1029
Youngduk-dong, Giheung-gu
Yongin-Si, Kyunggi-do,
446-908 Korea
LEBANON
Industrial Technologies S.A.L. (ITEC)
Point Center, Boulevard Fouad Chehab
Sin El Fil
Beirut
Lebanon
MEXICO
Grid Connect Inc.
T: +1 530 219 2565 (Spanish)
E: tomf@gridconnect.com
W: www.gridconnect.com
NETHERLANDS
PROCENTEC B.V.
Klopperman 16
2292 JD Wateringen
Netherlands
T:
F:
E:
W:
+31 (0)174 671 800
+31 (0)174 671 801
info@procentec.com
www.procentec.com
T:
E:
I:
+47 22 57 61 00
post@nortelcoautomation.no
www.nortelcoautomation.no
T:
F:
E:
W:
+51 163 737 35
+51 152 804 54
info@controlware.com.pe
www.controlware.com.pe
T:
F:
E:
W:
+48 32 230 75 16
+48 32 230 75 17
intex@intex.com.pl
www.intex.com.pl
NORWAY
Nortelco Automation AS
Johan Scharffenbergs vei 95
N-0694 Oslo
Norway
PERU
ControlWare
Jr. Los Silicios 5409
Los Olivos - L39
Peru
POLAND
INTEX Sp. z o.o.
ul. Portowa 4
44-102 Gliwice
Poland
PORTUGAL
IndustrialSys
Rua Alexandre Herculano 25
Mangualde, 3530-144
Portugal
T: +351 96 716 16 05
E: info@industrialsys.pt
W: www.industrialsys.pt
ROMANIA
S.C. SVT Electronics S.R.L.
Brǎila 7
540331 Tg-Mure
Romania
T:
F:
E:
W:
+ 40 744 383 666
+40 365 809 305
sajgo.tibor@svt.ro
www.svt.ro
T:
F:
E:
W:
+966 2 691 27 41
+966 2 682 89 43
info@asmestablishment.com
www.asmestablishment.com
SAUDI ARABIA
ASM Process Automation
Al-Zahra Dist. – Attas st.
cross section with helmy Kutby St.
Villa no.25
Jeddah-21553
Saudi Arabia
B1 Repeater user manual | April 2017 | ©PROCENTEC
13/17
SINGAPORE / SOUTH EAST ASIA
Allegro Electronics
236 Serangoon Avenue 3 07-98
Singapore 550236
T: +65 628 780 63
E: sales@allegro.com.sg
W: www.allegro.com.sg
SLOVAKIA
ControlSystem s.r.o.
Stúrova 4
977 01 BREZNO
Slovakia
T:
F:
E:
W:
+421 486 115 900
+421 486 111 891
jan.snopko@controlsystem.sk
www.controlsystem.sk
T:
F:
E:
W:
+27 (11) 548 9960
+27 (11) 465 8890
sales@idxonline.com
www.idxonline.com
SOUTH AFRICA
IDX ONLINE CC
1 Weaver Street
Fourways
Johannesburg
South Africa - 2191
SPAIN
LOGITEK, S.A
Ctra. de Sant Cugat, 63 Esc. B Planta 1ª
Rubí (BARCELONA), 08191
Spain
T: +34 93 588 67 67
E: xavier.cardena@logitek.es
W: www.logitek.es
SWEDEN
P&L Nordic AB
Box 252
S-281 23 Hässleholm
Sweden
T: +46 451 74 44 00
E: hans.maunsbach@pol.se
W: www.pol.se/profibus
SWITZERLAND
Berner Fachhochschule
PROFIBUS Kompetenzzentrum
Jlcoweg 1
CH-3400 Burgdorf
Switzerland
T:
F:
E:
W:
+41 (0) 34 426 68 32
+41 (0) 34 426 68 13
max.felser@bfh.ch
www.profitrace.ch
T:
F:
E:
W:
+886 2 8751 99 41/90 97
+886 2 8751 95 33
sales@fulldata.com.tw
www.fulldata.com.tw
T:
F:
E:
W:
+90 216 420 83 47
+90 216 420 83 48
tolgaturunz@emikonotomasyon.com
www.emikonotomasyon.com
T:
F:
E:
+971 4 326 26 92
+971 4 326 26 93
sales@synergycontrols.ae
Verwer Training & Consultancy
5 Barclay Road
Poynton, Stockport
Cheshire SK12 1YY
United Kingdom
T:
E:
I:
+44 (0)1625 871 199
andy@verwertraining.com
www.verwertraining.com
Hi-Port Controls
The Hub 2 Martin Close
Lee-on-Solent
Hampshire PO13 8LG
United Kingdom
T:
F:
E:
W:
+44 (0)8452 902 030
+44 (0)2392 552 880
sales@hiport.co.uk
www.hiport.co.uk
TAIWAN
Full Data Technology
6F., No.200, Gangqian Rd.
Neihu District, Taipei City
114, Taiwan
TURKEY
Emikon Otomasyon
DES Sanayi sitesi 103 sokak
B-7 blok No:16 Yukari Dudullu / Umraniye
Istanbul 34776
Turkey
UNITED ARAB EMIRATES
Synergy Controls
907, IT Plaza Silicon Oasis :
DubaiI
United Arab Emirates
UNITED KINGDOM and N. Ireland
B1 Repeater user manual | April 2017 | ©PROCENTEC
14/17
iTech
Unit 1
Dukes Road
Troon
Ayrshire KA10 6QR
United Kingdom
T:
F:
E:
W:
+44 (0)1292 311 613
+44 (0)1292 311 578
sales@itech-troon.co.uk
www.itech-troon.co.uk
Parkelect Ltd.
84 Dargan Road
Belfast
BT3 9JU
N. Ireland
T:
F:
E:
W:
+44 2890 777 743
+44 2890 777 794
jgillan@parkelect.co.uk
www.parkelect.co.uk
T:
F:
E:
W:
+1 630 245 14 45
+1 630 245 17 17
sales@gridconnect.com
www.gridconnect.com/procentec.html
T:
F:
E:
W:
+84-8-3547 09 76
+84-8-3547 09 77
hai.hoang@bavitech.com
www.bavitech.com
UNITED STATES
Grid Connect Inc.
1630 W. Diehl Road
Naperville, Illinois 60563
USA
VIETNAM
Bavitech Corporation
42 Truong Son Street
Ward 2, Tan Binh District
Ho Chi Minh City
Vietnam
For the complete list of our Sales Offices and Distributors see www.procentec.com/company/distributors.
If your country or region is not listed, please contact us. We are still searching for distributors who can cover
complete areas or countries.
B1 Repeater user manual | April 2017 | ©PROCENTEC
15/17
7.
About PROCENTEC
PROCENTEC is a specialist in PROFIBUS and PROFINET technology and develops products to optimize the
production processes of end users. Our innovative solutions ensure that our customers successfully operate
in the world of industrial automation and enjoy maximum results from their process.
PROCENTEC globally supplies all the components required to install a measurable and steerable network. We
develop and produce all products in the Netherlands and they are exported through our worldwide distribution
network. At PROCENTEC, we have a professional team of qualified support engineers who provide technical
support on-site and online. Our professionals have more than 20 years of experience with PROFIBUS and
PROFINET technology. They provide the necessary support to end users during implementation procedures,
certification processes, audits and malfunctions. PROCENTEC also is an international accredited Competence
and Training centre for PROFIBUS and PROFINET. We provide training courses that help employees using those
techniques optimally for their business objectives
Products
Services
Training
•
•
•
•
•
•
•
•
•
•
•
• PROFIBUS training courses
• PROFINET training courses
• Product training courses
ProfiTrace
ComBricks
ProfiHub
PROFINET tools
Cables & Connectors
On-site & Online Support
Network Audit
Network Certfication
Consultancy
Testlab & Democenter
Competence Center
B1 Repeater user manual | April 2017 | ©PROCENTEC
16/17
PROCENTEC BV
Klopperman 16
2292 JD Wateringen
The Netherlands
T: +31 (0)174 671 800
F: +31 (0)174 671 801
E: support@procentec.com
W: www.procentec.com