INSTRUCTION MANUAL
HEADSET MICROPHONE
YP-M301
Thank you for purchasing TOA’s Headset Microphone.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. GENERAL DESCRIPTION
4. SPECIFICATIONS
The YP-M301 is a headset microphone designed
to be exclusively used with an optional WM-1100
Portable Transmitter.
Maximum Input Sound
Pressure
Terminal
Cord Length
Finish
2. NOMENCLATURE
Headband
Weight
Slide arm
Microphone boom
Angle adjustable (360º)
Maximum 60 mm
Head pad
3.5 mm-diameter monaural plug
Type
Directivity
Sensitivity
Electret condenser type
Unidirectional
–46 dB (0 dB=1 V/Pa,
1 kHz, load: 2 kΩ)
117 dB SPL
ø3.5 mm monaural plug
1.2 m
Headband: ABS resin,
black
45 g (cable included)
Note:
The design and specifications are subject to
change without notice for improvement.
• Accessories
Storage case .............................................. 1
Windscreen (black) ..................................... 2
Microphone Windscreen
3. HOW TO USE
• Put on the headset and adjust the slide arms so that
the head pads are positioned just over the ears.
• Adjust a microphone boom, and position the
microphone (windscreen attached) at the mouth.
• Keep the microphone 3 – 5 cm away from the mouth
when using.
• Speaking loud or positioning the microphone too
close to the mouth could muffle sounds and make
them inaudible.
• The headset is not recommended for use in aerobics
or other vigorous performance applications.
• Use the supplied case when storing the unit.
URL: http://www.toa.jp/
133-05-309-0A