e 912 Pre-polarized condenser boundary microphone with half

e 912
Pre-polarized condenser boundary
microphone with half-cardioid pick-up pattern
FEATURES
Frequency
response and sensitivity
optimized for picking up instruments,
vocals and speech
Unobtrusive, flat housing
Extremely rugged and step-resistant
Shock-absorbing rubber base
Mounting slots for table installation
Gold-plated XLR connector
Integrated preamp
ARCHITECT’S
SPECIFICATIONS
The microphone shall be a half-cardioid prepolarized condenser designed for picking
up instruments, vocals and speech. It shall
have an unobtrusive, flat housing with an
extremely rugged, step-resistant sound inlet
basket and a shock-absorbing rubber base.
The microphone shall have an integrated
preamp. The frequency response shall be
20 Hz-20,000 Hz and the sensitivity (free
field, no load) shall be 10 mV/Pa at 1 kHz.
Nominal impedance shall be less than
100 O, with a min. terminating impedance
of 1 kO. Equivalent noise level shall be
26 dB(A). Maximum SPL shall be 135.6 dB.
The microphone shall operate on 48 V phantom power and shall provide a gold-plated
3-pin XLR connector. Dimensions shall be
126.5 x 105 x 26.5 mm (4.98“ x 4.13“ x
1.04“). Weight shall be 550 grams (19.40
oz). The microphone shall be the Sennheiser
e 912.
The e 912 is an ideal choice for pianos, theatre and opera productions,
conference applications, altars and lecterns. To optimally match the installation
environment, the e 912 is available in black or creme white.
TECHNICAL DATA
Transducer principle (Microphone)......................Permanently polarized condenser
Pick-up pattern.........................................................half-cardioid
Frequency response (microphone)......................20.....20,000 Hz
Sensitivity (free field, no load at 1 kHz)............10 mV/Pa
Nominal impedance.................................................< 100 Ohm
Min. terminating impedance.................................1000 Ohm
Equivalent noise level.............................................26 dB(A)
Max. sound pressure level (active)......................135.6 dB
Phantom powering..................................................48 V / 1.1 mA
Dimensions................................................................126.5 x 105 x 26.5 mm
Weight........................................................................550 g
Delivery includes
1 e 912
1 pouch
Instructions for use
e 912 Pre-polarized condenser boundary microphone with half-cardioid pick-up pattern
FREQUENCY RESPONSE
PRODUCT VARIANTS
e 912 WH – boundary microphone in whiteCat. No. 500648
e 912 BK – boundary microphone in blackCat. No. 500647
e 912 S WH – boundary microphone in
white with switch acoustically optimized
for picking up speechCat. No. 500876
Contact your local Service Partner:
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
POLAR PATTERN
e 912 S BK – boundary microphone in
black with switch, acoustically optimized
for picking up speechCat. No. 500875
e 912 S NX – boundary microphone in
Nextel grey with switch, acoustically
optimized for picking up speechCat. No. 502193
12/12 Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com. Copyright © 12/2012. All rights reserved. Errors and omissions excepted.
DIMENSIONS