Binary 220 Series HDMI Splitter Product Manual

OWNER’S MANUAL
HDMI 1X4 SPLITTER
B-220-HDSPLTR-1X4
IMPORTANT SAFETY INSTRUCTIONS
WELCOME TO BINARY™
1. Read and follow all instructions and warnings in this manual. Keep for future
reference.
2. Do not use this apparatus near water.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install according to manufacturer’s
instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
6. Do not override the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades - one wider than the other. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
7. Protect the power cord from being walked on or pinched particularly at plug,
convenience receptacles, and the point where it exits from the apparatus.
8. Only use attachments/accessories specified by the manufacturer.
9. Unplug this apparatus during lightning storms or when unused for long periods
of time.
10. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as when the power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
11. Do not expose this equipment to dripping or splashing and ensure that no
objects filled with liquids, such as vases, are placed on the equipment.
12. To completely disconnect this equipment from the AC mains, disconnect the
power supply cord plug from the AC receptacle
This product is designed to provide years of exceptional reliability. Binary™ is one
of the most highly-regarded Media Distribution brands available today and we
stand committed to providing our customers with the highest degree of quality and
service in the industry.
CONTENTS
(1) HDMI Splitter, 1x4
(1) 5VDC power adapter
(2) Mounting Ears
(4) Rubber Feet
(1) Owner’s Manual
FEATURES
• Distributes a single HDMI signal to 4 identical and synchronized HDMI outputs
• Configurable EDID Settings
• Supports 7.1 channel surround sound, DTS-HD Master Audio and TrueHD high bit
rate audio
• 6.75 Gpbs Bandwidth
• Full HD with 36 bit Deep Color
• HDCP compliant
Pg. 2
Pg. 3
CONNECTIONS
EDID CONFIGURATION
FRONT PANEL
1
Auto - Reads the EDID from each of the connected displays .This setting uses the
lowest common denominator for video resolution and audio format to create and
apply a new EDID to all inputs.
BACK PANEL
1
2
3
4
5V DC 1A
OUTPUT 1
STATUS
OUTPUT 2
OUTPUT 3
OUTPUT 4
On
1
POWER
POWER
OUTPUT 1
OUTPUT 2
INPUT
OUTPUT 3
3
1. Power LED
2. Input LED
3. Output LEDs
2
3
First Output - Reads the EDID from the display connected to output 1.
OUTPUT 4
2
Embedded 1 -6 - 6 representative EDIDs that can be assigned to Inputs. See
Dipswitch Settings (Page 6) for for details.
1. HDMI Input
2. HDMI Outputs
3. EDID Dipswitches
4. Power Supply (+5V DC)
INSTALLATION
1. Connect the HDMI cable from the source to the B-220-HDSPLTR.
2. Connect the HDMI cable from the B-220-HDSPLTR to the displays.
3. Connect the power to the B-220-HDSPLTR.
4. Turn on the source and the devices.
HDMI Source
B-220-HDSPLTR-1x4
AC Power
5V DC 1A
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
On
1
Flatpanel TV
Pg. 4
Flatpanel TV
2
3
Flatpanel TV
Flatpanel TV
© 2012 Binary™
Pg. 5
B-220-HDSPLTR-1x4 Owner’s Manual
B-220-HDSPLTR-1x4 Owner’s Manual
DIPSWITCH SETTINGS
EDID
Resolution
SPECIFICATIONS
Color Depth
Audio
Auto
Switch Settings
1
First Output
Up
1
1
1080i@60Hz
24-Bit
7.1ch
Up
2
1080i@60Hz
24-Bit
2ch
Up
3
4
Video Support
VESA: 640x480, 800x600, 1024x768, 1280x1024,
1600x1200, 1920x1200
HDTV: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Video Bandwidth
6.75 Gbps
Video Transmission
Full 1080p HD with 36 bit Deep Color
Audio Support
Surround Sound (up to 7.1ch) DTS-HD Master
Audio and TrueHD high bitrate audio
ESD Protection
Human Body (air gap): 15kV
Human Body (contact): 8kV
HDMI Connector Type
Type A (19 pin female)
Power Supply
5V DC, 1A
Power Consumption
3.5 Watts (max)
Dimensions
6.24” W x 1.01” H x 3.2” D
Weight
1.88lbs (0.86kg)
Certifications & Compliance
Power Supply: CE, FCC, UL, Rohs
Product: CE, FCC, Rohs
Down Down Down
1080p@60Hz
1080p@60Hz
24-Bit
24-Bit
7.1ch
2ch
5
1080p@60Hz
24-Bit 3D
7.1ch
6
1080p@60Hz
24-Bit 3D
2ch
2
Up
2
Up
1
2
3
Up
3
Down
3
Down Down
1
Down
1
2
3
Up
2
Up
3
Down Down
1
Down
1
2
Up
2
Up
3
Down
3
Up Down Up
1
2
3
Pg. 6
Pg. 7
WARRANTY
2-Year Limited Warranty
This Binary™ Product has a 2 Year Limited Warranty. This warranty includes parts and
labor repairs on all components found to be defective in material or workmanship
under normal conditions of use. This warranty shall not apply to products which have
been abused, modified or disassembled. Products to be repaired under this warranty
must be returned to SnapAV or a designated service center with prior notification
and an assignment return authorization number (RA).
CONTACTING TECHNICAL SUPPORT
Phone: (866) 838-5052
Email:Techsupport@snapav.com
120731-0910
Pg. 8