PROLINE E xternal
Components
PROLINE® Door Accessories
Tamperproof Screws and Bit
Tamperproof screws can be used
with solid covers and solid sides.
The screws have a tamperproof
recess that requires a special
driver bit for installation and
removal. The screw package
has 18 tamperproof screws
with a clear plated finish. The
tamperproof bit, which must
be ordered separately, fits any
standard 1/4-inch hex driver.
Folding Shelf
The shelf mounts to door using
the door bar grid straps (sold
separately). Shelf is 16 gauge
steel with 12 gauge brackets.
Shelf finish is RAL 7035 textured
light gray polyester powder
paint. Locks in two positions 90
degrees as a shelf and 15 degrees
as a writing surface. Also mounts
to three-row grid straps, side or
back panel, or any flat surface.
Holds up to 30 pounds.
Door Bar Grid Straps
Straps mount to the door bar.
Used to mount accessories to
the door. Constructed of 16
gauge steel with plated finish.
Holds up to 100 pounds.
180-degree Hinge Kit
Optional hinging for solid,
window, or disconnect doors.
The 180° hinges provide up to a
260° door opening on single-bay
enclosures. These hinges mount
to the door flange and have a
low-profile appearance. The kit
includes three hinges finished
with RAL 9005 textured black
polyester powder paint and all
necessary mounting hardware.
Bulletin
P20, UX1Y, DACCY
Catalog Number
Description
PSTM6
ATRSDVR
Tamperproof Screws
Tamperproof Bit
Catalog Number
Description
PSHDM
Fits door widths 600, 700, 800, and 1000mm
Catalog Number
Description
PGH1S4D
PGH1S5D
PGH1S6D
PGH1S7D
PGH1S8D
PGH1S10D
Fits door width of 400mm
Fits door width of 500mm
Fits door width of 600mm
Fits door width of 700mm
Fits door width of 800mm
Fits door width of 1000mm
Catalog Number
Description
PH180
180° Hinge Kit
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
PROLINE® Door Accessories
Door Stop Kit
PROLINE E xternal
Components
Bulletin
P20, UX1Y, DACCY
Door Support Roller Kit
Modular Enclosure
Systems
Catalog Number
The door stop kit holds doors
open at 130°. The kit includes
a slotted bracket that mounts
to either the top or bottom of
the door and a stop arm that
attaches to the frame. The door
stop kit is plated, mounts without
drilling, and includes all necessary
mounting hardware. Not suitable
for use with 180° hinging. Drill
points in window door brackets
for mounting door stop kit.
PDSK
Catalog Number
The door support roller kit
supports and aligns heavy doors.
Kit is suitable for all solid doors
and glass window doors. Kit is not
recommended for use on solid
doors with door bars removed or
polycarbonate window doors. Drill
points in window door brackets
for mounting door stop kit.
Thermoplastic Data Pocket
Provides a convenient place to store
wiring diagrams, operation manuals,
and other documentation inside the
enclosure. Adhesive-backed pockets
mount inside the solid enclosure
cover. Mounting hardware included.
Thermoplastic pockets are dark gray
and have cut-away areas for easy
inspection of contents.
Steel Data Pocket
Steel data pocket fastens to the bottom of the door. Finish is RAL
7035 textured light gray polyester powder paint. Door bar grid
straps (purchased separately) must be used to change the vertical
mounting position of the data pocket.
PDSRKL
Catalog
Number Description Fits A x B (mm)
L (mm) L (in.) W (mm) W (in.)
ADP1
ADP2
152
305
Small pocket 508 x 406 and 610 x 610
Large pocket 762 x 610
5.98 152
12.01 305
5.98
12.01
Catalog Number
A x B x C mm (in.)
Description
PDP1
418 x 224 x 72
(16.46 x 8.82 x 2.83)
Single size fits all door widths
Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com
© 2007 Hoffman Enclosures Inc.
Spec-00422
Rev. A
04/07